Yokogawa Gyro Compass Cmz 700 User Manual

The control unit can drive up to 20 repeaters. The manual provides two modes:

The manual’s chart shows exactly which dipswitch (SW2-1 through SW2-4) controls this. yokogawa gyro compass cmz 700 user manual

Symptom: Heading drifts slowly (>1°/min after settled) The control unit can drive up to 20 repeaters

Symptom: CDU blank but master unit LED on The manual’s chart shows exactly which dipswitch (SW2-1

Symptom: No repeater output

This is the most frequently accessed part of the manual. It details:

| Alarm Message | Cause | Action | |---------------|-------|--------| | NO GYRO DATA | Internal sensor failure | Restart power. If persists, replace master unit. | | ALIGN TIMEOUT | Vessel moving during alignment | Stop vessel, realign via MENU → Restart alignment. | | POWER FAIL | Input voltage < 18V | Check PSU and ship’s supply. | | LATITUDE INVALID | No GPS and manual entry missing | Enter latitude manually. | | OVER TEMP | Internal > 65°C | Check ventilation, reduce ambient temperature. | | NMEA OUT ERROR | Short circuit on NMEA output | Disconnect load, check wiring. |