Vika Y120 - Vladmodel

With the 2‑inch 720p camera and a 5.8 GHz 200 mW transmitter, the Vika Y120 provides clear low‑latency video up to 1 km (line‑of‑sight). The added weight (≈ 30 g) reduces flight time by ~15 %, but the stability gained from the gyro‑assisted pitch makes aggressive “dive‑and‑climb” maneuvers much more controllable.

| Frequency | Method | |-----------|--------| | After every 5 kg filament or if print quality degrades | Cold pull with nylon filament (180 °C). | | Weekly (if idle) | Heat to 250 °C, manually wipe with a brass brush. | | Once a month (full maintenance) | Disassemble the hot‑end (follow the Service Manual PDF on the support site). | Vladmodel Vika Y120

This section assumes intermediate to advanced modeling skills. Do not attempt the Y120 as your first resin kit. With the 2‑inch 720p camera and a 5

  • Updates. Vladmodel promises 3 years of major OS upgrades and 4 years of security patches. So far, the company has delivered updates on schedule.
  • Bloatware. Only a handful of pre‑installed apps (Vlad Cloud, Vika Themes, a weather widget). All can be disabled or uninstalled without root.
  • Google Services. Fully certified, with the Play Store, Chrome, and Google Assistant working out‑of‑the‑box.

    • Verdict: The software is clean, responsive, and future‑proof for a reasonable period. The added features are useful without being intrusive. | Frequency | Method | |-----------|--------| | After

    | ✅ | Action | Details | |---|---|---| | 1 | Unbox & inspect | Verify all parts (see Section 2). Check for shipping damage. | | 2 | Place on a flat, stable surface | Minimum 30 × 30 cm, away from direct sunlight/heat. | | 3 | Connect power | Plug the 24 V 2 A power brick into the rear socket, then into a grounded outlet. | | 4 | Power‑on | Press the Power button (green LED should turn amber). | | 5 | Home axes | From the LCD menu → Control → Home All. | | 6 | Load filament | Follow Section 4 (Load Filament). | | 7 | Print test model | Insert the pre‑loaded SD card (or connect via USB) and select DemoCube.gcode. | | 8 | Verify print | A 20 mm calibration cube should emerge cleanly. |

    If any step fails, refer to the Troubleshooting tables in Sections 7‑8.

    Related Content

    Vika Y120 - Vladmodel