V2000-c Rfid Access Control User Manual May 2026
The V2000-C is a "Standalone" unit, meaning it does not require a constant network connection to work, but it can connect for management.
| Status | LED Color | Buzzer | | :--- | :--- | :--- | | Standby | Red (solid) | None | | Card read OK | Green (1 flash) | 1 short beep | | Access denied | Red (3 flashes) | 3 long beeps | | Programming mode | Orange/Flashing | Double beep |
Once wiring is triple-checked, apply power. V2000-c Rfid Access Control User Manual
Emergency Reset Procedure (Forgot Master Code):
The V2000-C is a standalone RFID access control system designed for single-door management. It supports EM/Mifare (13.56MHz & 125KHz) card reading, a durable waterproof keypad, and a 3-color LED status indicator. The V2000-C is a "Standalone" unit, meaning it
The V2000-C is a standalone RFID access control reader with an integrated keypad. It supports:
It is designed for single-door control (electric lock, exit button, alarm, door sensor). USB Port:
Prevents a user from swiping twice to let in a tailgater.
| Terminal | Label | Connection | Wire Gauge (AWG) | | :--- | :--- | :--- | :--- | | 1 | +12V | Power Supply Positive (10-14V DC) | 18-22 | | 2 | GND | Power Ground / Common Negative | 18-22 | | 3 | NO | Normally Open (Magnetic Lock) | 18 | | 4 | COM | Common (Lock Relay) | 18 | | 5 | NC | Normally Closed (Electric Strike - Fail Secure) | 18 | | 6 | PUSH | Exit Button Signal (Short to GND to activate) | 22 | | 7 | SEN | Door Contact Sensor (Magnetic Reed Switch) | 22 | | 8 | AL+ | Alarm Output (+) | 22 | | 9 | AL- | Alarm Output (-) | 22 | | 10 | +12V | Reader Power (For external reader – rarely used) | 22 | | 11 | DATA0 | Wiegand Data 0 (For external reader) | 22 | | 12 | DATA1 | Wiegand Data 1 (For external reader) | 22 |