If your Medianav still says "9.1.3" in the settings, you are living in the past. The 1.0.13.1 firmware is the final, polished state of that hardware. It fixes the Bluetooth bugs, modernizes the UI, and saves you €500 on a Chinese Android head unit.
Do not let the lower version number fool you. Upgrade to 1.0.13.1, and you will finally stop hating your car’s infotainment system.
Disclaimer: This process involves modifying manufacturer firmware. Proceed at your own risk, ensure your car battery is on a charger, and double-check your exact Medianav generation (MEDIA NAV Evolution vs. MEDIA NAV 2.0) before proceeding.
Upgrading a MediaNav device from version 9.1.3 to 1.0.13.1 is not possible via a standard software update because these versions belong to two different hardware generations with incompatible operating systems.
Version 9.1.3 is the final official firmware for MediaNav Evolution (Generation 2), which runs on Windows CE 6.
Version 1.0.13.1 belongs to MediaNav Linux (Generation 3), also known as ULC4 or MediaNav Evolution 2, which runs on a Linux-based system. Hardware Compatibility Breakdown
Because the underlying hardware and processors differ significantly, you cannot "flash" the Linux-based firmware (1.0.x.x) onto the Windows-based hardware (9.x.x). MediaNav Evolution (v5.x - 9.1.3) MediaNav Linux (v1.0.x - 1.0.15.x) Operating System Windows CE 6 Hardware Gen Generation 2 (LG LAN5200 WR2) Generation 3 (LG LAN5800WR0) Connectivity Some support wired CarPlay/Android Auto Native Linux/Android support Display Resistive Touchscreen (standard) Capacitive Multi-touch (improved sensitivity) How to Achieve Modern Features (Android Auto / CarPlay)
If your goal for the upgrade is to get Android Auto or Apple CarPlay, you may already have them or can enable them without switching to version 1.0.13.1. Media nav evolution Android Auto | UK Dacia Forum
It is not possible to upgrade a MediaNav system from version 9.1.3 to 1.0.13.1 via a software update because they run on entirely different hardware and operating systems. Why the Upgrade Isn't Compatible
The jump from 9.1.x to 1.0.x represents a transition between two different generations of MediaNav devices:
MediaNav Evolution (Version 9.1.3): Runs on Windows CE 6.0 hardware. Version 9.1.3 is generally the final official software update for this specific hardware generation. upgrade medianav 9.1.3 to 1.0.13.1
MediaNav Evolution 2 / ULC4 (Version 1.0.13.1): Runs on a newer Linux-based platform. This hardware is more powerful and supports modern features like Android Auto and Apple CarPlay, which the older 9.1.3 hardware cannot support natively. Your Options
Because these versions are incompatible, you cannot simply download a file to your USB drive to bridge the gap. Here are your alternatives: MediaNav Evolution Update - car multimedia software
Upgrading from MediaNav version 9.1.3 is not a simple software patch; it requires replacing the physical hardware unit Version 9.1.3 belongs to the MediaNav Evolution (MN2/Evo1)
hardware generation (WinCE-based), while version 1.0.13.1 belongs to the newer MediaNav Evolution Late 2018 (MN3/Evo3) generation (Linux-based) which supports Android Auto and Apple CarPlay Key Differences & Feasibility Software Incompatibility
: You cannot install the 1.0.13.x firmware on a 9.1.3 unit because the operating systems and internal hardware architectures are entirely different. Hardware Swap Required
: To achieve version 1.0.13.1, you must purchase a newer MediaNav unit (often referred to as the ULC4 or Linux version) from a donor vehicle or a parts supplier. Physical Fit
: The physical dimensions and mounting points for both units are identical, making a physical swap straightforward in Dacia and Renault vehicles. Step-by-Step Upgrade (Hardware Replacement) Procure the New Unit
: Look for a MediaNav unit from a post-2018 vehicle. Ensure it has the hardware to support CarPlay/Android Auto. Removal of Old Unit Remove the plastic trim around the dashboard. Unscrew the four screws holding the 9.1.3 unit. Disconnect the wiring. Installation of New Unit Connect the existing wiring harnesses. They are typically plug-and-play
, though some variants might require a camera adapter if the original pins differ. Mount the new unit and replace the dashboard trim. Security Activation When first powered on, the system will ask for a four-digit anti-theft code This code can often be retrieved using apps like the Renault Radio Code Generator or by contacting your local Renault dealership with the unit's serial number. System Configuration (Micom Test)
If features like the rearview camera (RVC) or parking sensors don't work immediately, you must access the Micom Test hidden menu to enable them. To access this, you usually need a specific USB file (e.g., mcmtest_activate.ini ) and a series of screen taps in the "System Version" menu. Comparison Table MediaNav 9.1.3 (MN2) MediaNav 1.0.13.x (MN3) Windows Embedded CE 6.0 Connectivity Bluetooth, USB (MP3) Bluetooth, Android Auto, CarPlay Performance Slower response, older UI Faster processor, modern UI Naviextra based Naviextra based (Linux version) Important Warnings Never press the "MEC Virgin" button If your Medianav still says "9
in the Micom Test menu, as it will permanently wipe the software from your unit. Battery Condition
: Always perform hardware swaps and initial configurations with the engine running or a battery charger connected to prevent the unit from shutting down mid-process. local specialist to assist with the hardware swap or instructions for the Micom Test menu for your specific vehicle?
Remplacement Medianav 9.1.3 vers 1.0.13.*** - GPS - Forum Auto
Published by: Automotive Tech Hub | Reading time: 8 minutes
If you own a Renault, Dacia, or Lada vehicle equipped with the Medianav (also known as MediaNav or RNM – Renault New Media) infotainment system, you have likely encountered two specific firmware versions: 9.1.3 and 1.0.13.1.
Navigating the numeric maze of firmware versions can be confusing. Why would you go from 9.1.3 (which sounds newer) to 1.0.13.1 (which sounds older)? The answer lies in understanding that Mediannav versions are not linear decimals; they represent different branches of software development.
In this guide, we will break down exactly why you should upgrade from Medianav 9.1.3 to 1.0.13.1, the benefits, the risks, and a step-by-step walkthrough to ensure a safe and successful update.
The interface receives a significant facelift. The Gen2 software offers a cleaner, more modern visual style with smoother animations. Menus are more responsive, reducing the lag often experienced when switching between Radio, Media, and Navigation.
Upgrading from 9.1.3 to 1.0.13.1 is not an official over-the-air update. It requires a USB stick, a specific file structure, and the guts to sit in your driveway praying the battery doesn't die.
The Golden Rule: You must go via an intermediate version (usually 8.0.5 or 2.0.2 depending on your hardware revision). Jumping directly from 9.1.3 to 1.0.13.1 will brick your unit. It turns into a paperweight. A sad, beige paperweight with a Renault logo on it. Published by: Automotive Tech Hub | Reading time:
But if you follow the "Stepstone" method (9.1.3 → 8.0.5 → 1.0.13.1), the risk is minimal.
If you drive a Renault, Dacia, or Lada vehicle equipped with the Medianav (also known as R-Link Lite or MediaNav Evolution) infotainment system, you are likely familiar with the frustration of an outdated interface. Many owners find themselves stuck on older firmware versions, such as 9.1.3, often plagued by slow response times, Bluetooth connection drops, and limited smartphone compatibility.
The upgrade to version 1.0.13.1 is not just a minor patch; it is a significant overhaul. This article will walk you through everything you need to know about this update: why you need it, how to prepare your USB drive, the exact installation steps, and troubleshooting common errors.
Upgrading MediaNav from 9.1.3 to 1.0.13.1 is one of the most cost-effective modifications available for older Dacia and Renault models. It transforms a sluggish, outdated system into a functional, modern interface. However, it requires patience and attention to the v2.20 intermediary step to ensure a successful transition.
Disclaimer: This guide is for informational purposes. Modifying vehicle firmware carries inherent risks. Always ensure files are sourced from reputable locations and follow official safety guidelines.
Directly upgrading a MediaNav device from version via a software update is not possible
because they run on different hardware and operating systems Version 9.1.3 is the final official update for the MediaNav Evolution (v1) , which runs on Windows CE Version 1.0.13.1 (and other 1.0.x.x versions) belongs to the MediaNav Evolution 2 (ULC4) , which runs on and supports Android Auto/Apple CarPlay. Differences Between Systems MediaNav Evolution (v1) MediaNav Evolution 2 (ULC4) Firmware Versions 5.x.x to 9.1.3 1.0.x.x to 1.0.15.x Operating System Windows CE 6 Hardware Type LG LAN5200 LG LAN5800 Connectivity Standard Bluetooth/USB Android Auto & Apple CarPlay How to Get Version 1.0.13.1
Since you cannot bridge these versions with software, you have two primary options: Hardware Swap
: You can replace your existing 9.1.3 head unit with a newer MediaNav Evolution 2 (ULC4) unit. This is often a "plug and play" physical installation in Renault and Dacia vehicles, though some configuration via Micom Manager
might be needed to align with your car's specific features (like the rearview camera). Aftermarket Firmware
: If you want new features without swapping hardware, some users install third-party "skins" like
to add video players or newer maps, though these still run on the old Windows CE base. : Attempting to force-load a 1.0.x.x file onto a 9.1.3 system will likely brick the device or instructions for installing custom firmware on your 9.1.3 device? Update MediaNav 9.1.3 to Android version 1.0.13.1?