Sp Furo 13wmv Verified [2025]

Non-verified valves may fail catastrophically under pressure. In a pneumatic circuit, a counterfeit SP Furo 13WMV can cause uncontrolled actuator movement, leading to equipment damage or operator injury. Verified units meet ISO 1219 and ISO 13849 safety standards.

The filtration media itself is tested. For the 13WMV, verification confirms:

The market is saturated with look-alikes. A "Verified" logo can be faked, but here is how to spot a fraud: sp furo 13wmv verified

| Feature | Genuine Verified Unit | Counterfeit | | :--- | :--- | :--- | | Canister Paint | Matte, chip-resistant epoxy | Glossy, peels easily | | Thread Machining | Continuous cut, no burrs | Rough, interrupted cuts | | Internal Spring | Zinc-plated, ground ends | Bare steel, open ends | | Verification Code | Traceable online (2D barcode) | Static printed number | | Weight | 1.85 lbs (standard) | Usually < 1.6 lbs |

Always purchase from OEM distributors or authorized industrial suppliers. If the price is more than 20% below market average (currently $85-$125 USD), it is likely unverified. Non-verified valves may fail catastrophically under pressure

Genuine, verified SP Furo 13WMV units adhere to strict parameters. Below are the standard specifications you should expect:

| Specification | Typical Value | |---------------|----------------| | Valve Type | 5/2 or 3/2 single or double solenoid, pilot-operated | | Port Size | 1/4” NPT or G1/4” (BSPP) – confirm variant | | Operating Pressure | 0.15 – 1.0 MPa (21.7 – 145 PSI) | | Proof Pressure | 1.5 MPa (217 PSI) | | Flow Coefficient (Cv) | 1.1 – 1.5 (depending on configuration) | | Response Time | < 30 ms (opening), < 25 ms (closing) | | Temperature Range | -10°C to +60°C (14°F to 140°F) | | Coil Insulation Class | F or H (155°C / 180°C) | | Duty Cycle | 100% ED (continuous) | | Protection Class | IP65 (with proper cable gland) | Understanding where this valve is used helps you

A verified unit will include a test report confirming these specs. If a seller cannot provide a datasheet matching these numbers, avoid the purchase.

Understanding where this valve is used helps you appreciate why verification is non-negotiable:

In each case, a failure of a non-verified SP Furo 13WMV can shut down an entire production line, costing thousands per hour.