Moderate EP (Extreme Pressure) characteristics. The 4-ball weld load of 250 kg indicates suitability for normal to heavy loads, but not for severe shock-loading conditions (for which a grease with higher EP additives like Alvania EP(LF) would be required).
Looking at the specifications section of the sheet, you will see a few standout numbers:
Cons:
Recommendations:
If you want, I can:
Shell Alvania Grease 3 Go to product viewer dialog for this item. (also referred to as Shell Alvania G3
) is a high-performance, multipurpose industrial grease traditionally used for the lubrication of rolling and sliding bearings. While the specific "Alvania" branding has largely been phased out, the modern equivalent— Shell Gadus S2 V100 3 Go to product viewer dialog for this item.
—maintains the same technical specifications and performance characteristics. Technical Data and Specifications The technical data sheet (TDS) for Shell Alvania G3 Gadus S2 V100 3
defines it as a medium-to-hard consistency grease based on a lithium hydroxystearate soap thickener. Characteristic Specification (Typical) NLGI Consistency Grade 3 (Medium/Hard) Soap Type Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C 10.2–11 cSt Dropping Point 180°C - 190°C Color Brown or Light Yellow Operating Temperature -20°C to +130°C Key Performance Benefits
Oxidation and Mechanical Stability: Resists the formation of deposits and maintains its consistency even under severe vibrations or shock loading.
Corrosion Resistance: Fortified with anti-rust and anti-wear additives to provide protection in hostile industrial environments.
High-Temperature Reliability: Performance remains stable up to its peak operating temperature of +130°C, which helps extend bearing life.
Long Storage Life: Consistency does not degrade during prolonged storage. Common Applications
Due to its Grade 3 consistency, this grease is slightly stiffer than standard Grade 2 greases, making it ideal for vertical bearings and applications requiring better resistance to leakage. Shell Gadus S2 V100 3 - 400g - Lube finder
Shell Alvania G3 Data Sheet
Introduction
Shell Alvania G3 is a high-performance, lithium-based grease designed for use in a wide range of industrial and automotive applications. This data sheet provides an overview of the key characteristics, features, and benefits of Shell Alvania G3, as well as its typical properties and performance data.
Product Description
Shell Alvania G3 is a smooth, creamy grease with a lithium soap thickener and a high-viscosity index base oil. It is formulated to provide excellent lubrication and protection against wear, corrosion, and oxidation in a variety of applications, including:
Key Features and Benefits
Typical Properties
| Property | Unit | Value | | --- | --- | --- | | Appearance | - | Smooth, creamy | | Colour | - | Light brown | | NLGI Consistency | - | 3 | | Dropping Point | °C (°F) | 190 (374) | | Base Oil Viscosity | mm²/s (cSt) at 40°C (104°F) | 220 | | Thickener | - | Lithium soap | | Corrosion Protection | - | Excellent |
Performance Data
Health, Safety, and Environment
Shell Alvania G3 is formulated to be safe for use in a wide range of applications. However, as with any lubricant, it is essential to follow proper handling and use procedures to minimize risks.
Regulatory Compliance
Shell Alvania G3 meets or exceeds the requirements of various industry standards, including:
Conclusion
Shell Alvania G3 is a high-performance grease designed to provide excellent lubrication and protection in a wide range of industrial and automotive applications. Its excellent wear protection, corrosion protection, and oxidation stability make it an ideal choice for use in demanding environments. Consult the Shell Alvania G3 data sheet and product documentation for more information on its use and handling.
Shell Alvania Grease G3 (often identified as Shell Alvania RL 3 Shell Alvania S3
) is a high-performance, medium-to-hard industrial grease designed for general-purpose applications. Under Shell’s current product naming system, this product has been largely replaced by Shell Gadus S2 V100 3 Technical Specifications The "3" in the name refers to its NLGI Consistency Grade
, indicating a semi-solid to solid texture similar to butter. Shell Alvania Grease S | Southern Lubricants
Shell Alvania G3 (now primarily succeeded by Shell Gadus S2 V100 3
) is a high-performance, multipurpose industrial grease. It is formulated with a lithium hydroxystearate soap thickener and high-viscosity index mineral oils to provide reliable lubrication in various bearing applications. Product Overview Consistency Grade:
, which indicates a firm, semi-solid texture suitable for applications requiring higher resistance to leakage or vibration. Thickener Type:
Lithium soap, providing good mechanical stability and water resistance. Primary Use:
General-purpose lubrication for rolling element and plain bearings, particularly those operating at medium temperatures and speeds. Shell Iraq Technical Specifications
Based on the technical data for the Alvania G series and its modern equivalent: Typical Value Test Method NLGI Consistency Base Oil Type Kinematic Viscosity @ 40°C 100 mm²/s Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point ~180°C to 185°C Operating Temp Range -35°C to +150°C Key Performance Features Oxidation Stability:
Specially selected base oil components offer excellent resistance to oxidation, preventing the formation of deposits at high operating temperatures. Mechanical Stability:
Maintains consistency over long periods, even under severe vibration. Corrosion Protection:
Contains anti-rust additives to protect metal surfaces against corrosion, even in the presence of moisture. Extended Life:
Designed for long-duration service in applications where frequent re-greasing is difficult or not required. Shell Iraq Common Applications Industrial Bearings:
Used in electric motor bearings and fan bearings where high-speed performance is balanced with the need for a firmer grease to prevent leakage. Vertical Bearings:
The firmer NLGI 3 consistency makes it ideal for vertical shaft applications where softer greases might slump or leak out of the housing. Vibrating Environments:
Preferred for equipment subjected to high levels of vibration, as it resists thinning better than NLGI 2 alternatives. Safety and Handling
Generally unlikely to present a significant health hazard when used correctly in the intended application. Environment: Avoid discharge into drains or watercourses.
Store in a cool, dry place away from direct sunlight and heat sources. EP (Extreme Pressure) variant for heavy-load applications? Shell Gadus S2 V220 1
Technical Analysis: Shell Alvania G3 Industrial Grease Shell Alvania G3 is a legacy high-performance industrial grease that has largely been transitioned to modern formulations within the Shell Gadus product range. As a Grade 3 grease, it is characterized by its medium-to-hard consistency, making it ideal for high-speed industrial applications where a stiffer grease is required to resist leakage and maintain a stable lubricant film. Technical Specifications and Composition
The following specifications are typical for the Alvania G3/S3 series as detailed in historical technical data sheets: Characteristic Specification NLGI Consistency Grade 3 (Medium/Hard) Thickener Type Lithium hydroxystearate soap Base Oil Type Highly refined mineral oil Base Oil Viscosity ~100–130 cSt @ 40°C Dropping Point ~180°C to 190°C Operating Range -20°C to +130°C (up to +135°C intermittently)
The grease is formulated with approximately 75–85% lubricant base oil, 5–15% lithium soap thickener, and 5–10% additives designed for oxidation resistance, anti-wear protection, and rust prevention. Core Performance Features
Mechanical Stability: Engineered to maintain its consistency even under severe vibrations, preventing grease softening and subsequent leakage.
Oxidation Resistance: Resists the formation of deposits and sludge at high operating temperatures, which extends bearing life and reduces maintenance intervals.
Corrosion Protection: Effectively protects metal surfaces in hostile, humid, or wet environments.
High-Speed Performance: Specifically designed for rolling element bearings operating up to their maximum rated speeds. Primary Applications
Shell Alvania G3 is frequently utilized in precision machinery and heavy industrial equipment, including: Shell alvania g3 data sheet - WSBE17 Hong Kong
With a dropping point above 180°C, this grease can withstand brief high-temperature excursions. However, its maximum continuous operating temperature is typically recommended as 120°C (248°F) due to the mineral base oil.
This is the most critical number for predicting bearing life.
Moderate EP (Extreme Pressure) characteristics. The 4-ball weld load of 250 kg indicates suitability for normal to heavy loads, but not for severe shock-loading conditions (for which a grease with higher EP additives like Alvania EP(LF) would be required).
Looking at the specifications section of the sheet, you will see a few standout numbers:
Cons:
Recommendations:
If you want, I can:
Shell Alvania Grease 3 Go to product viewer dialog for this item. (also referred to as Shell Alvania G3
) is a high-performance, multipurpose industrial grease traditionally used for the lubrication of rolling and sliding bearings. While the specific "Alvania" branding has largely been phased out, the modern equivalent— Shell Gadus S2 V100 3 Go to product viewer dialog for this item.
—maintains the same technical specifications and performance characteristics. Technical Data and Specifications The technical data sheet (TDS) for Shell Alvania G3 Gadus S2 V100 3
defines it as a medium-to-hard consistency grease based on a lithium hydroxystearate soap thickener. Characteristic Specification (Typical) NLGI Consistency Grade 3 (Medium/Hard) Soap Type Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C 10.2–11 cSt Dropping Point 180°C - 190°C Color Brown or Light Yellow Operating Temperature -20°C to +130°C Key Performance Benefits
Oxidation and Mechanical Stability: Resists the formation of deposits and maintains its consistency even under severe vibrations or shock loading.
Corrosion Resistance: Fortified with anti-rust and anti-wear additives to provide protection in hostile industrial environments.
High-Temperature Reliability: Performance remains stable up to its peak operating temperature of +130°C, which helps extend bearing life.
Long Storage Life: Consistency does not degrade during prolonged storage. Common Applications
Due to its Grade 3 consistency, this grease is slightly stiffer than standard Grade 2 greases, making it ideal for vertical bearings and applications requiring better resistance to leakage. Shell Gadus S2 V100 3 - 400g - Lube finder
Shell Alvania G3 Data Sheet
Introduction
Shell Alvania G3 is a high-performance, lithium-based grease designed for use in a wide range of industrial and automotive applications. This data sheet provides an overview of the key characteristics, features, and benefits of Shell Alvania G3, as well as its typical properties and performance data.
Product Description
Shell Alvania G3 is a smooth, creamy grease with a lithium soap thickener and a high-viscosity index base oil. It is formulated to provide excellent lubrication and protection against wear, corrosion, and oxidation in a variety of applications, including:
Key Features and Benefits
Typical Properties
| Property | Unit | Value | | --- | --- | --- | | Appearance | - | Smooth, creamy | | Colour | - | Light brown | | NLGI Consistency | - | 3 | | Dropping Point | °C (°F) | 190 (374) | | Base Oil Viscosity | mm²/s (cSt) at 40°C (104°F) | 220 | | Thickener | - | Lithium soap | | Corrosion Protection | - | Excellent |
Performance Data
Health, Safety, and Environment
Shell Alvania G3 is formulated to be safe for use in a wide range of applications. However, as with any lubricant, it is essential to follow proper handling and use procedures to minimize risks.
Regulatory Compliance
Shell Alvania G3 meets or exceeds the requirements of various industry standards, including:
Conclusion
Shell Alvania G3 is a high-performance grease designed to provide excellent lubrication and protection in a wide range of industrial and automotive applications. Its excellent wear protection, corrosion protection, and oxidation stability make it an ideal choice for use in demanding environments. Consult the Shell Alvania G3 data sheet and product documentation for more information on its use and handling. shell alvania g3 data sheet
Shell Alvania Grease G3 (often identified as Shell Alvania RL 3 Shell Alvania S3
) is a high-performance, medium-to-hard industrial grease designed for general-purpose applications. Under Shell’s current product naming system, this product has been largely replaced by Shell Gadus S2 V100 3 Technical Specifications The "3" in the name refers to its NLGI Consistency Grade
, indicating a semi-solid to solid texture similar to butter. Shell Alvania Grease S | Southern Lubricants
Shell Alvania G3 (now primarily succeeded by Shell Gadus S2 V100 3
) is a high-performance, multipurpose industrial grease. It is formulated with a lithium hydroxystearate soap thickener and high-viscosity index mineral oils to provide reliable lubrication in various bearing applications. Product Overview Consistency Grade:
, which indicates a firm, semi-solid texture suitable for applications requiring higher resistance to leakage or vibration. Thickener Type:
Lithium soap, providing good mechanical stability and water resistance. Primary Use:
General-purpose lubrication for rolling element and plain bearings, particularly those operating at medium temperatures and speeds. Shell Iraq Technical Specifications
Based on the technical data for the Alvania G series and its modern equivalent: Typical Value Test Method NLGI Consistency Base Oil Type Kinematic Viscosity @ 40°C 100 mm²/s Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point ~180°C to 185°C Operating Temp Range -35°C to +150°C Key Performance Features Oxidation Stability:
Specially selected base oil components offer excellent resistance to oxidation, preventing the formation of deposits at high operating temperatures. Mechanical Stability:
Maintains consistency over long periods, even under severe vibration. Corrosion Protection:
Contains anti-rust additives to protect metal surfaces against corrosion, even in the presence of moisture. Extended Life:
Designed for long-duration service in applications where frequent re-greasing is difficult or not required. Shell Iraq Common Applications Industrial Bearings:
Used in electric motor bearings and fan bearings where high-speed performance is balanced with the need for a firmer grease to prevent leakage. Vertical Bearings: Moderate EP (Extreme Pressure) characteristics
The firmer NLGI 3 consistency makes it ideal for vertical shaft applications where softer greases might slump or leak out of the housing. Vibrating Environments:
Preferred for equipment subjected to high levels of vibration, as it resists thinning better than NLGI 2 alternatives. Safety and Handling
Generally unlikely to present a significant health hazard when used correctly in the intended application. Environment: Avoid discharge into drains or watercourses.
Store in a cool, dry place away from direct sunlight and heat sources. EP (Extreme Pressure) variant for heavy-load applications? Shell Gadus S2 V220 1
Technical Analysis: Shell Alvania G3 Industrial Grease Shell Alvania G3 is a legacy high-performance industrial grease that has largely been transitioned to modern formulations within the Shell Gadus product range. As a Grade 3 grease, it is characterized by its medium-to-hard consistency, making it ideal for high-speed industrial applications where a stiffer grease is required to resist leakage and maintain a stable lubricant film. Technical Specifications and Composition
The following specifications are typical for the Alvania G3/S3 series as detailed in historical technical data sheets: Characteristic Specification NLGI Consistency Grade 3 (Medium/Hard) Thickener Type Lithium hydroxystearate soap Base Oil Type Highly refined mineral oil Base Oil Viscosity ~100–130 cSt @ 40°C Dropping Point ~180°C to 190°C Operating Range -20°C to +130°C (up to +135°C intermittently)
The grease is formulated with approximately 75–85% lubricant base oil, 5–15% lithium soap thickener, and 5–10% additives designed for oxidation resistance, anti-wear protection, and rust prevention. Core Performance Features
Mechanical Stability: Engineered to maintain its consistency even under severe vibrations, preventing grease softening and subsequent leakage.
Oxidation Resistance: Resists the formation of deposits and sludge at high operating temperatures, which extends bearing life and reduces maintenance intervals.
Corrosion Protection: Effectively protects metal surfaces in hostile, humid, or wet environments.
High-Speed Performance: Specifically designed for rolling element bearings operating up to their maximum rated speeds. Primary Applications
Shell Alvania G3 is frequently utilized in precision machinery and heavy industrial equipment, including: Shell alvania g3 data sheet - WSBE17 Hong Kong
With a dropping point above 180°C, this grease can withstand brief high-temperature excursions. However, its maximum continuous operating temperature is typically recommended as 120°C (248°F) due to the mineral base oil.
This is the most critical number for predicting bearing life. Recommendations: