Resetter Printer: Canon G2010

Resetting your Canon G2010 is a software solution to a hardware problem. While this guide fixes the digital counter and gets you printing again, please remember that the physical waste ink pads are still full.

If you print heavily, check the bottom of your printer occasionally for ink leakage. If you found this guide helpful, share it with others facing the same error 5B00 headache! resetter printer canon g2010

Disclaimer: This guide is for educational purposes. Resetting the ink counter without servicing the waste pads may lead to ink overflow. Proceed at your own risk. Resetting your Canon G2010 is a software solution

⚠️ Important Warning:
This procedure resets the printer’s internal counter, not the physical ink pads. If the pads are already full of ink, resetting without cleaning/replacing them can cause ink leakage, damaging your printer or desk. Disclaimer: This guide is for educational purposes

Yes, in 90% of cases. Without a resetter, your only official option is to send the printer to an authorized Canon service center. The technician will physically replace the waste ink pads and reset the counter, which can cost between $50 and $100—often more than the printer itself.

Using a resetter is the only DIY method to revive a "bricked" Canon G2010 due to the waste ink error. However, there is a critical warning: you should only reset the counter after you have physically cleaned or replaced the waste ink pads. Resetting without cleaning can lead to ink leaking inside your printer, causing permanent electrical damage.

A resetter (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero.