Using the Adjustment Program on your Epson L3050 or L3070 will void your manufacturer's warranty if the printer is still covered. This tool is intended for repair professionals or out-of-warranty devices. If your printer is under warranty, contact Epson support for a free repair or replacement instead.
Final Verdict: The Epson L3050/L3070 Adjustment Program is a powerful workaround for the inevitable "waste ink pad full" error. It can extend the life of your printer significantly, but it should be paired with proper physical maintenance of the waste ink system to avoid damaging your machine or desk.
To reset an Epson L3050 or using the Adjustment Program (also known as a Resetter), you need to clear the internal waste ink pad counter. This program is a specialized utility that fixes errors like "Service Required," "Ink Pad is at the end of its service life," or the E11 error accompanied by flashing red lights. Steps to Reset Epson L3050-L3070
Follow these steps carefully to restore your printer to working condition:
To reset the waste ink pad counter on an Epson L3050 Go to product viewer dialog for this item.
printer using the Adjustment Program, follow these steps. This process resolves "Service Required" errors and flashing red lights. Preparation
Connection: Connect your printer to your computer using a USB 2.0 cable (Wi-Fi or Ethernet connections are not supported for this utility).
Security: Temporarily disable Windows Real-time Protection and any antivirus software, as they often mistakenly flag resetter files as harmful.
Drivers: Ensure the correct Epson printer driver is installed on your PC. Step-by-Step Reset Instructions
To reset an Epson L3050 printer using the Adjustment Program (also known as a "Resetter"), you typically follow a specific sequence to clear the Waste Ink Pad Counter. This process is used when the printer displays a "Service Required" error or the lights blink alternately. Prerequisites reset epson l3050-l3070 adjustment program
Computer Connection: Ensure your printer is connected directly to your PC via a USB cable. The resetter will not work over Wi-Fi.
Antivirus: Many third-party adjustment programs are flagged as false positives. You may need to temporarily disable your antivirus or Windows Defender to run the application.
Adjustment Program: Download or acquire the specific utility for the L3050-L3070 series. Step-by-Step Reset Guide
When your Epson L3050 or L3070 printer displays a "Service Required" error or shows blinking "Ink" and "Paper" lights, it usually means the waste ink pad counter has reached its limit. To fix this without a professional service call, you can use the Epson Adjustment Program (also known as AdjProg) to reset the internal counter to zero. Preparation Before Resetting
Before running the utility, ensure you meet these technical requirements:
Operating System: Use a Windows computer; this software is generally not compatible with macOS.
Connection: Connect the printer to your PC using a high-quality, short USB 2.0 cable. Wireless resets are not reliable.
Antivirus: Temporarily disable Windows Defender or your antivirus software, as they often flag adjustment programs as false positives.
Print Queue: Clear all pending documents from the print queue to prevent the program from hanging during the process. Step-by-Step Reset Guide for L3050 & L3070 Using the Adjustment Program on your Epson L3050
Follow these steps to reset your waste ink counter using the Adjustment Program:
Launch the Software: Extract the downloaded archive and run AdjProg.exe or AdjProg Rev3.exe as an administrator.
Select Model: Click the Select button. In the "Model Name" dropdown, choose L3050 or L3070. For the "Port," you can leave it on Auto Selection, though manually selecting the specific USB port connected to your printer is safer. Enter Service Mode: Click Particular Adjustment Mode.
Find the Counter: Locate and select Waste ink pad counter from the list, then click OK. Check and Initialize:
Check the boxes for both Main Pad Counter and Platen Pad Counter. Click Check to view current usage levels (usually 100%).
Select the boxes again and click Initialize. A confirmation box will appear; click OK to proceed.
Finalize: The program will prompt: "Please turn off the printer." Turn off the printer using its power button, wait a few seconds, then turn it back on.
Your printer’s status should now show 0%, and the "Service Required" error will be gone. Important Maintenance Warning
The Adjustment Program only resets the software counter; it does not physically clean the ink pads. If you reset the counter multiple times without cleaning or replacing the pads, ink may eventually leak out of the printer and damage your furniture or internal electronics. For a long-term solution, consider installing an external waste ink tank or replacing the absorbent pads. Final Verdict: The Epson L3050/L3070 Adjustment Program is
Skipping hardware step = ink leaks onto your desk & electronics.
The Epson L3050 and L3070 are "ecotank" (refillable tank) printers. They do not use cartridges. Because they print so many pages before requiring a refill, the waste ink pads fill up quickly. The manufacturer sets the counter to force a service stop after approximately 8,000 to 15,000 pages. This is not a hardware failure—it is a safety lock.
Resetting the counter solves the software lockout, but it does not solve the physical problem. If you have printed thousands of pages, the actual foam pads inside the printer are likely full of ink.
If you reset the counter without replacing or cleaning the pads, ink will eventually overflow and leak out of the bottom of the printer. This can ruin your furniture or short-circuit the printer's motherboard.
Recommendations:
Epson does not publicly distribute these tools. They are available through:
Be cautious: Always scan downloaded files for malware.
If you cannot find the official resetter, try these: