This is not a gameplay balance patch. Instead, it focuses on three core technical areas:
Do not skip this checklist. Installing the wrong fix can corrupt your game data.
| Requirement | Details |
|-------------|---------|
| PS3 Console | Custom Firmware (CFW) 3.55, 4.xx, or HEN (Hybrid Firmware). The fix was built for 3.55 but works on later CFWs. |
| Game Backup | Mortal Kombat BLUS30522 (folder format or ISO). Must be the original 2011 release, not the Komplete Edition. |
| Game Update | Official v1.05 PKG (approx 89-100 MB). Do not install v1.06 or v1.07 as they break this fix. |
| Tools | MultiMAN (or any file manager), a USB drive formatted to FAT32, and an FTP client (FileZilla recommended). |
| The Patch Itself | BLUS30522_Patch_Fix_355_89.pkg or a similarly named archive containing USRDIR replacement files. |
BLUS30522 is the serial identification number for the North American retail version of Mortal Kombat (2011), developed by NetherRealm Studios. If you are looking at the spine of your PS3 game case or browsing your hard drive, this code identifies this specific version of the game.
Do not launch directly from the XMB disc icon. Open MultiMAN, select Mortal Kombat BLUS30522, press X to mount, then go back to XMB and launch from the disc icon.
The "355" in the search query is likely a typo or a specific file naming convention for Patch 1.05.
Patch 1.05 was a significant update released by NetherRealm Studios back in June 2011. While it included general gameplay tweaks and balance changes, its primary purpose for modern players is compatibility and DLC support.
Key features of Patch 1.05 include:
The search for “patch fix 355 mortal kombat blus30522 89 install” represents a dedicated corner of the PS3 homebrew community — players who demand perfection from a decade-old fighting game on legacy firmware. While newer solutions exist (like the Komplete Edition or PC ports), none replicate the specific combination of stability, moddability, and low-level access that the 3.55 + BLUS30522 + patch 89 provides.
By following this guide, you’ve taken a broken, crash-prone backup and turned it into the definitive Mortal Kombat (2011) experience on CFW PS3. Now finish them — without a single freeze.
Further Reading & Resources:
Disclaimer: This article is for educational purposes regarding system recovery and game preservation. Only install patches on games you legally own and dump yourself.
The "Patch Fix 355" for Mortal Kombat (BLUS30522) is a community-developed update designed for the PlayStation 3 version of the 2011 game (MK9). This specific fix allows the game to run on older console firmware (3.55) or Custom Firmware (CFW) by modifying the game's executable (EBOOT.BIN) and parameter files to bypass newer system requirements. The Story of the Patch Fix
In the early days of PS3 modding, many users stayed on Firmware 3.55 to maintain homebrew access. When Mortal Kombat (ID: BLUS30522) was released, it required higher firmware to run, effectively locking out many enthusiasts.
The community created a "3.55 Patch Fix" to bridge this gap:
The Installation: Users would typically install the base game and then overwrite the internal files with a "fixed" .pkg or manual EBOOT replacement.
The Fix: It resolved the "An error occurred during the start operation" message that appeared when trying to launch the game on older systems.
The Result: This allowed players to experience the complete Story Mode—Raiden’s desperate attempt to rewrite history—without being forced to update their console’s official firmware. Installation Overview
Preparation: Ensure the base game (BLUS30522) is correctly installed on the PS3's internal or external drive.
Patch Download: Obtain the specific 1.07 Patch Fix (or version 3.55 compatible .pkg).
Applying the Fix: Use a file manager like Multiman or the PS3's "Install Package Files" menu to apply the fix.
Verification: If successful, the game bypasses the firmware check and boots directly into the main menu.
If you encounter issues where the Story Mode is "red" or unavailable, players often recommend deleting the Game Utility Data and reinstalling the patch to ensure no files were corrupted during the transfer.
Do you need help finding the specific file structure for the BLUS30522 directory, or are you seeing a specific error code during the install?
MK9 PS3 edition not working? (Read comments) : r/MortalKombat
The BLUS30522 code identifies the North American release of Mortal Kombat (2011), often referred to as MK9. This version frequently requires a mandatory installation upon first launch on the PS3, which can be quite large.
Platform Compatibility: While native to PS3, this title is also available on Xbox 360 and PC.
System Storage: Ensure you have at least 10 GB of free space available for the initial install and subsequent patches. Installation Guide for Patches and Fixes
If you are encountering crashes during update prompts, common community solutions focus on bypassing corrupted data or regional mismatches.
Preparation: Before installing new patches, it is often recommended to delete any previously downloaded patches or DLC that might be corrupted. Offline Installation: Disconnect your console from the internet (PSN). Launch the game and reach the main title screen.
Once at the main menu, sign back into PSN and accept the update when prompted. This method helps prevent crashes that occur when the system tries to authenticate the update while the game engine is loading assets.
Emulator Specifics (RPCS3): For those playing via emulation, specific graphical "patch fixes" may be needed. For example, issues like "green blood" can be resolved by setting ZCull Accuracy to 'Relaxed' and Shader Quality to 'Low' in the RPCS3 GPU settings. Troubleshooting Common Errors patch fix 355 mortal kombat blus30522 89 install
This guide provides the necessary steps to install Patch Fix 355 for the BLUS30522 version of Mortal Kombat (2011) on PS3. This specific fix is often used to resolve compatibility issues with custom firmware or to fix game-breaking bugs in older versions. 🛠️ Prerequisites Before starting, ensure you have the following: Game Version:
Mortal Kombat Komplete Edition (Region: US / ID: BLUS30522). Console State: PS3 with HEN or CFW (Custom Firmware) installed. A FAT32 formatted USB drive or FTP access. Patch_Fix_355_BLUS30522.pkg 📂 Installation Steps 1. Prepare the File Download the specific fix file for BLUS30522. Rename it to something simple if the name is too long. file to the (main folder) of your USB drive. 2. Connect to PS3 Plug the USB drive into the right-most port of the PS3. If using HEN, ensure you Enable HEN from the XMB first. Navigate to the column on your menu. 3. Install the PKG Package Manager Install Package Files (this looks at your USB drive). Highlight the Patch Fix and press to install. 4. Verify Version Highlight the Mortal Kombat icon on the XMB. and select Information
Ensure the version number has updated or the "Fix" is applied. ⚠️ Important Troubleshooting Black Screen:
If the game won't boot, try deleting the "Game Data Utility" for Mortal Kombat (not your save data!) and reinstalling the patch. Region Mismatch:
works for BLUS30522. If your game is BLES (Europe), this will likely cause a crash.
Ensure your system is on 3.55 or higher, as this patch is designed to bridge compatibility for older firmware versions. 🥊 Ready to Fight?
The update 1.05 for Mortal Kombat (2011) (Region: US, ID: ) is a critical patch primarily known for balancing the roster and enabling stable online play. If you are encountering the common "black screen" or system shutdown during installation, users on
suggest bypassing the initial prompt and attempting to trigger the download directly from the in-game online menu. Patch 1.05 Review: The "Competitive Standard" Update
For many players, this patch transformed the game from a chaotic experimental fighter into a more balanced competitive title. Gameplay Balancing
: This update significantly tweaked top-tier characters. For instance,
had his "Ground Freeze Reset" removed, preventing infinite loop combos that plagued earlier versions.
also saw hitbox and frame adjustments to make his mix-ups more "honest". Online Stability
: As of [November 30, 2011], this patch is required to access any online features or lobbies. It improved netcode stability, although some latency remains a hallmark of the PS3 era. Visuals & Performance
: The game continues to hold up on the PS3 Super Slim, maintaining a smooth 60fps even after the update. The Verdict : If you are playing the base version of
, this update is essential. It fixes game-breaking infinites and is the only way to experience the "final" balanced state of the game intended by NetherRealm. Quick Install Tips for BLUS30522 If the automatic 89MB download is failing or hanging: Delete Existing Data : Go to the Game Data Utility on your PS3 XMB and delete any existing Mortal Kombat patch data (do not delete your Save Data). Bypass Launch Prompt : Decline the update when you first launch the game. Trigger via PSN
: Log into PSN, then go to the "Online" section within the game menu. The game will often prompt a more stable download from this screen. included in this update?
The information provided refers to the installation of an update or "fix" for Mortal Kombat 9 (2011) on a jailbroken PlayStation 3 console using Homebrew Enabler (HEN) or Custom Firmware (CFW). The ID BLUS30522 corresponds specifically to the North American "Komplete Edition" of the game. Installation Guide
For systems running HEN or CFW, the standard method for installing game updates involves using a FAT32-formatted USB drive. Prepare the USB Drive: Format your USB drive to FAT32.
File Placement: Create a folder named packages (lowercase) on the root of your USB drive. Place the .pkg patch/fix file inside this folder.
Enable Homebrew: On your PS3, navigate to the Game column and select Enable HEN (if applicable) before attempting the installation. Install the Package: Insert the USB drive into the rightmost port of the PS3. Go to Package Manager > Install Package Files.
Select Standard (or USB root) to locate your .pkg file and press X to begin the installation.
License Activation (if needed): If the fix requires a license, place the corresponding .rap file in a folder named exdata on your USB drive and use a tool like PSN Patch to activate it. Important Considerations
Version Compatibility: Ensure the patch version matches your game region. BLUS30522 patches will not work with the European BLES version.
Alternative Methods: If you prefer not to use a USB, you can transfer the .pkg file via FTP to the dev_hdd0/packages directory on your PS3's internal hard drive and install it through the Package Manager.
RPCS3 Emulation: For those using the RPCS3 emulator on PC, you can install the patch by dragging and dropping the .pkg file directly into the emulator window or using the File > Install Packages/Raps/Edats menu option. AI responses may include mistakes. Learn more (EP 3) PS3 Jailbreak: Installing PS3 Games, DLC & Updates
Mortal Kombat BLUS30522 : Complete Installation and Patch Fix Guide Mortal Kombat (2011) North American release (
) remains a staple for fighting game enthusiasts on the PlayStation 3. However, users frequently encounter hurdles during the setup process, particularly with large data installs and subsequent "fix" patches. This article outlines the step-by-step process to successfully install the game and apply necessary fixes to ensure a smooth gameplay experience. Understanding BLUS30522 and Patch 355
code corresponds to the standard North American edition of Mortal Kombat 9. In the modding and preservation communities, a "patch fix" or "355 fix" often refers to a specific update or modified
file designed to bypass compatibility issues with certain firmware versions or to enable compatibility with emulators like Pre-Installation Requirements
Before beginning the installation, ensure you have the following: Storage Space: A minimum of
is recommended to accommodate the initial install and the 8.9GB of cached game data. This is not a gameplay balance patch
If you are using a USB drive to transfer files, it must be formatted to for the PS3 to recognize it. Filenames: Ensure the patch file does not contain special symbols like , as these can cause installation errors. Step-by-Step Installation Guide 1. Initial Game Installation
If you are using a digital version or a backup, install the base game first. Navigate to the Package Manager on your PS3 dashboard. Install Package Files and choose your source (Standard or USB). Install the base game file first. 2. The 8.9GB Data Install
Upon first launch, Mortal Kombat BLUS30522 typically requires an internal data installation of approximately The "Wait" Factor:
This process can be slow. Do not turn off the console or disconnect the controller while the bar is moving. Troubleshooting Errors:
if you receive an error during this 8.9GB phase, try disconnecting any unnecessary USB devices (like charging cables) to ensure the system's power supply is stable during the write process. 3. Applying the "Fix 355" Patch If you have a separate "fix" file (often a small under 100MB), install it the base game and the internal data install are complete. Package Manager Install Package Files Select the This will overwrite the necessary executable ( ) to ensure the game runs on your specific firmware. Common Fixes for Installation Errors Error 80010006:
Usually caused by an invalid character in the filename. Rename your file to something simple, like MK_FIX.pkg System Freezing:
Ensure your PS3's internal hard drive has enough breathing room. Filling the drive to 100% capacity often causes the 8.9GB install to fail halfway through. Firmware Mismatch:
If the game fails to boot, verify that the patch fix matches the game's region ( for North America vs. for Europe). For further assistance with emulated versions, the RPCS3 Wiki
provides detailed compatibility settings for this specific title. configuration settings for running this version on an emulator?
Patch Fix 355 Mortal Kombat BLUS30522 89 Install: A Step-by-Step Guide
Are you experiencing issues with Mortal Kombat game patch 355, specifically with the BLUS30522 89 install? Look no further! This blog post will walk you through a comprehensive guide on how to prepare and successfully install the patch fix.
Understanding the Issue
Before we dive into the solution, it's essential to understand the problem. The patch fix 355 for Mortal Kombat, specifically for the BLUS30522 89 version, seems to be causing installation issues for some users. This guide aims to provide a clear and concise step-by-step approach to resolve the issue.
Preparation Steps
To ensure a smooth installation process, follow these preparation steps:
Step-by-Step Installation Guide
Troubleshooting Tips
If you encounter issues during the installation process, try the following:
Conclusion
By following this step-by-step guide, you should be able to successfully install the patch fix 355 for Mortal Kombat BLUS30522 89. If you're still experiencing issues, consider seeking further assistance from the gaming community or the game's official support team. Happy gaming!
The search terms you provided refer to a community-developed "Patch Fix" for the PlayStation 3 version of Mortal Kombat (2011)
, specifically for the BLUS30522 region code. These fixes are typically packaged as .pkg files (like the "89" or "v1.05" versions) to be installed on consoles with custom firmware or through emulators like RPCS3.
While official patch notes for Mortal Kombat games generally focus on character balancing and bug fixes, this specific community patch (often associated with the "355" or "3.55" firmware era) usually includes the following features: Core Patch Features
DLC Integration: Automatically unlocks and integrates all DLC characters (Skarlet, Kenshi, Rain, and Freddy Krueger) and classic skin packs directly into the base game.
Version 1.05 Updates: Includes official balance changes and bug fixes released by NetherRealm Studios, such as move list corrections and AI adjustments.
System Compatibility: Designed to allow the game to run on PS3 systems with older firmware (like 3.55) or to fix "black screen" errors on newer custom firmware.
Emulator Optimization: Improves stability and performance when running the BLUS30522 build on PC emulators like RPCS3. Installation Highlights File Format: Typically distributed as a .pkg file.
Installation Method: On a console, it is installed via the "Install Package Files" menu. For emulators, you can simply drag and drop the .pkg into the emulator window to update the game to the latest version.
Directory Management: For modding or specific "fixes," users may need to run tools as administrator or place files in the main game directory to ensure mods and DLC display correctly.
For a detailed guide on managing DLC and installing similar community updates for Mortal Kombat 9, you can watch this tutorial: FATE - Fight All Thy Enemies YouTube• May 6, 2022 PATCH NOTES - Mortal Kombat 1
The "patch fix 355 mortal kombat blus30522 89mb" refers to a specific legacy update and Custom Firmware (CFW) fix for the PlayStation 3 version of Mortal Kombat 9 BLUS30522 is the serial identification number for the
. This particular file is used by the modding community to ensure compatibility on consoles running firmware version 3.55 or to fix errors related to game installation and DLC on modified systems. Understanding the Patch and Fix Game ID (BLUS30522):
This identifier specifically belongs to the North American release of the original Mortal Kombat (2011) for PS3. Firmware 3.55 Fix:
During the early PS3 homebrew era, firmware 3.55 was a standard for jailbroken consoles. Many games required a "fix" (usually a modified
file) to run if they were originally designed for higher official firmware. File Size (89MB): This file is typically distributed as a
(package) file that includes the version 1.05 update and the necessary bypasses to allow the game to boot on older CFW. General Installation Process
Note: These steps are based on common practices for installing legacy PS3 game fixes. Format Your Drive: Use a USB drive formatted to File Placement: file (the 89MB patch fix) in the of the USB drive (not inside any folders). Install Package: On your PS3 with CFW or HEN enabled, navigate to the Package Manager (or Install Package Files) in the Game tab. Selection: Select "Standard" or "USB" and choose the Mortal Kombat BLUS30522 patch to install it.
Once installed, it is often recommended to restart the console or the backup manager (like multiMAN) to ensure the game launches without a "black screen" or error code. Troubleshooting Common Issues Black Screen on Launch:
This often occurs if the fix is not matched to the correct game version. Ensure your base game is the BLUS30522 version and not the "Komplete Edition" (which has a different ID). DLC Not Appearing:
Some fixes include DLC unlockers. If they don't appear, you may need a separate "EDAT" fix or ReactPSN to activate the content. Error Code 80029564:
This is a common installation error often caused by corrupted downloads or filesystem issues on the PS3. Steam Community how to verify your game's region ID before installing this patch? Patch Fix 355 Mortal Kombat Blus30522 89 Install
To install the patch fix for Mortal Kombat (BLUS30522) on a jailbroken PS3, follow these steps to ensure the game functions correctly on custom firmware (CFW) or HEN. Installation Guide for Mortal Kombat Patch Fix Prepare the File Ensure your patch fix file (typically a file) is named correctly and ready for transfer. If the file is larger than 4GB, use an NTFS or exFAT formatted USB drive. For files under 4GB, a drive is sufficient. Transfer to PS3 file in the root directory of your USB drive or inside a folder named (uppercase).
Connect the USB drive to the rightmost USB port on your PS3. Install via Package Manager On your PS3, enable (if applicable). Navigate to Package Manager Install Package Files USB Device to locate your file and press to begin the installation. Apply Firmware-Specific Fixes
If you are using a "fix" specifically for older firmware like
, ensure you install the version that matches your system to avoid boot errors. Troubleshooting Common Errors Version Mismatch : Ensure the patch matches your game ID (
). Installing a patch for a different region (e.g., BLES) may cause the game to fail or show as uninstalled. License Issues : If the game requires a license file, place it in an folder on your USB drive and use ) to activate it. Black Screen/Not Launching
: If the game fails to start after patching, verify that the internal files were not corrupted during the transfer. Further Exploration Learn the technical details of managing files for homebrew on the PS3 Homebrew Community Reddit
Watch a visual walkthrough for installing package files on HEN-enabled consoles from MrMario2011
Check the latest official character adjustments and gameplay fixes for newer entries in the series at the Mortal Kombat Patch Notes Are you currently running Custom Firmware (CFW)
like Rebug or Evilnat to assist with more specific settings?
The Mortal Kombat (2011) update process for the BLUS30522 (North American) version on legacy PlayStation 3 systems involves installing the v1.05 patch to enable online play and balance adjustments. For users on Custom Firmware (CFW) 3.55, a specific "fix" or modified PKG is often required to bypass newer firmware requirements. Update Overview & Patch Fix
Target Version: The most stable and final major update for the original MK9 release is v1.05.
3.55 Compatibility: Standard PKG updates from Sony often require firmware higher than 3.55. A "3.55 Fix" is a modified configuration file (EBOOT.BIN) or a resigned PKG that allows the game to run on older 3.55 systems.
Mandatory Install: Be aware that the PS3 version of Mortal Kombat requires a large mandatory data install upon the first launch, which is separate from the patch file. Installation Procedure Preparation: Ensure your USB drive is formatted to FAT32.
File Placement: Place the .pkg patch file (and the 3.55 fix PKG, if separate) into the root directory of your USB drive. Package Installation:
Insert the USB into the right-most port of the PS3 (closest to the disc drive).
Navigate to the Game column on the XMB and select Install Package Files.
Install the v1.05 update first, followed by the 3.55 Fix PKG.
Verification: Launch the game; if successful, the version number (1.05) should be visible in the lower corner of the main menu or tournament screen. Key v1.05 Patch Changes
The 1.05 update introduced significant character balancing to the competitive scene:
Scorpion: Improved hit advantage on Side Kick and recovery on Enhanced Flame-Port. Sub-Zero: Removal of certain ground freeze resets.
System Fixes: Addressed rare online desyncs and fixed incorrect brutality descriptions.
For a detailed look at the mechanical changes and combo potential introduced in this version, you can watch this post-patch analysis:
We will assume you already have Mortal Kombat BLUS30522 installed on your internal HDD (e.g., /dev_hdd0/GAMES/BLUS30522/).