Owon Hds2102s Firmware Update Link -
Updating the firmware of your Owon HDS2102S can significantly enhance its performance, security, and functionality. By following the steps outlined in this guide, you can easily find and apply the latest firmware update. Always ensure you download firmware from the official Owon website or authorized distributors to avoid any potential security risks. If you encounter any issues during the update process, do not hesitate to contact Owon's customer support for assistance.
The OWON HDS2102S is a handheld 100 MHz oscilloscope, multimeter, and waveform generator. Keeping its firmware updated is essential for resolving known issues, such as a horizontal graticule display bug in version 1.51 and earlier. Firmware Update Resources
The official source for all firmware and software is the Lilliput (OWON) Download Center.
Updates for the OWON HDS2102S handheld oscilloscope are complex due to significant hardware revisions. Official firmware can be downloaded from the OWON Download Center
, but you must strictly match the version to your device's current hardware to avoid permanent damage. Essential Firmware Version Guide
Owon has released multiple hardware "branches" for the HDS200 series.
attempt to install firmware from a different major version branch (e.g., do not upgrade a V1.x unit to V4.x). Known Versions Notes & Key Fixes V1.4.1, V1.5.1
Fixes 2ns/div display spacing issue; improves signal accuracy. V4.1.0, V4.7.1, V4.9.0
Includes vertical units in Volts and Amperes; some users report "upside-down screen" issues if mismatched. V5.1.1 – V5.7.1
Common on newer 2021-2022 board dates; adds Roll mode stability improvements. V8.6, V8.8
Found on the latest 2024–2025 hardware; includes RMS measurements. How to Update Your Device owon hds2102s firmware update link
The update process requires a PC connection and the specific file for your model. Check Current Version F2 (System) to find your current firmware and hardware version. Enter Upgrade Mode : In the System menu, select USB Connection : Connect to your PC. In the System menu, set
. The device will appear as a removable disk on your computer. Transfer File : Copy the file to the root of the removable disk.
: Turn the oscilloscope off and then back on. The device will automatically perform the upgrade and shut down when finished. Critical Safety Warnings Official Disclaimer
: Owon support has previously advised users against upgrading if no specific issue exists, stating "if it's not on the site for your exact version, don't upgrade". Hardware Lock
: Some units with "Gigadevice" flash chips are reported as non-upgradable due to hard-coded checksums. Inversion Risk
: Installing a V4.x firmware on some V1.x or V2.x hardware can cause the LCD display to remain permanently upside down exact hardware branch using your serial number before you download a file? OWON HDS 200 Handheld Oscilloscope w/ builtin DMM/AWG
Title: Owon HDS2102S Firmware Update: Enhance Your Oscilloscope's Performance
Introduction: The Owon HDS2102S is a high-performance, handheld digital oscilloscope designed for a wide range of applications, including industrial, scientific, and educational fields. To ensure that your device stays up-to-date and operates at its best, Owon provides firmware updates that can enhance its performance, fix bugs, and add new features. In this article, we will guide you on how to update the firmware of your Owon HDS2102S oscilloscope.
Why Update the Firmware? Updating the firmware of your Owon HDS2102S oscilloscope can bring several benefits, including:
Downloading the Firmware Update: To update the firmware of your Owon HDS2102S oscilloscope, follow these steps: Updating the firmware of your Owon HDS2102S can
Firmware Update Link: You can download the firmware update for Owon HDS2102S from the following link:
[Direct link to Owon HDS2102S firmware update]
Update Process: Once you have downloaded the firmware update, follow these steps to update your Owon HDS2102S oscilloscope:
Conclusion: Updating the firmware of your Owon HDS2102S oscilloscope is a straightforward process that can bring significant benefits, including improved performance, new features, and bug fixes. By following the steps outlined in this article, you can ensure that your device stays up-to-date and operates at its best.
Disclaimer: Please note that the firmware update link provided is subject to change, and users are advised to verify the authenticity of the firmware update before installation. Owon is not responsible for any damage caused by unauthorized firmware updates.
Let me know if you need any modification or want me to add/remove any section.
Also, I need to clarify that I don't have an actual link to the firmware update as I'm a text-based AI model and do not have have direct access to real-time information or links. You should verify the firmware update link from the official Owon website.
To update the firmware on your OWON HDS2102S , follow the guide below. Note that OWON uses different firmware tracks based on the hardware version of your device, so verifying your current version is critical before proceeding. 1. Identify Your Current Firmware
Before downloading any files, check your device's current version to ensure compatibility: Power on your HDS2102S.
to view the current Firmware version (e.g., V1.x.x, V2.x.x, V4.x.x). Downloading the Firmware Update: To update the firmware
: Some early hardware versions (serial numbers starting with 2152xxx) may have read-only flash chips and are not user-upgradable. 2. Download Firmware Files Official firmware and PC software can be found at the OWON Download Center Official Link OWON HDS200 Series Firmware Downloads Version Matches V1.x.x Track : Latest is typically V4.x.x Track : Users have reported versions as high as on community forums like : You may also need the PC software for HDS200 Series from the same page to facilitate the transfer. 3. Update Procedure Preparation
: Connect your HDS2102S to your PC using the provided USB cable. Software Link
: Open the OWON PC software. If the device is not recognized, ensure you have the correct drivers (though many modern systems recognize it as a virtual serial device automatically). File Selection
: In the software, look for the "Upgrade" or "Firmware Update" section. Select the file you downloaded. : Start the update. Do not disconnect the cable or power off the device during this process, as it can "brick" the unit.
: Once complete, the device will typically reboot. Verify the new version in the Utility > About device.report Why Update?
: Version 1.5.1 fixed a notable display discrepancy where the horizontal graticules were incorrectly spaced at the 2ns/div range. New Features
: Recent updates (V4.x.x) added the ability to display vertical units in , which is useful for users with current clamps. specific community-patched firmware
versions if the official site doesn't list your hardware variant?
Updating the HDS2102S is not complicated, but you must follow the order precisely. Here is the safe method.
Before we get to the link, let’s talk about why you should bother. Owon rarely publishes flashy changelogs, but based on user reports and my own experience, updating to the latest firmware (V1.0.5 or newer) typically fixes:
Warning: Do not use firmware from the HDS200 series (non-S). The "S" model has different hardware (including the touch screen). Using the wrong firmware will brick your device.