Even though rekordbox won't recognize the controller natively, your computer must see it as a MIDI device.
Q: Can I use the Mixtrack Pro 2 with rekordbox on a Mac M1? A: Yes, but you must install the Rosetta 2 translation layer. Right-click rekordbox app -> Get Info -> Check "Open using Rosetta."
Q: Does the built-in sound card work? A: Yes. The master output and headphone cue work perfectly once you set the Output Routing correctly (Master: 1/2, Headphones: 3/4).
Q: Can I export my custom map to share with a friend?
A: Yes. Locate the .midi or .csv file in the Pioneer/rekordbox/controller folder. Send them the file. They must follow the same installation steps.
Q: I loaded the map, but the loop section doesn't work. A: Many maps require you to press the "Shift" button to access Loop functions, or they map the "Loop In" to the Censor button. Read the map's original forum post for a cheat sheet.
The Numark Mixtrack Pro 2 is not natively supported by Rekordbox. You must use a third-party MIDI mapping file (.csv or .txt) and import it manually via the MIDI settings in Rekordbox. 🛠️ Step-by-Step Mapping Guide 1. Find the Mapping File
Since Pioneer (Rekordbox) and Numark are competitors, there is no "official" download. Visit DJTechTools or Pioneer DJ Forums. Search for "Mixtrack Pro 2 Rekordbox MIDI mapping."
Download the .csv or mapping file provided by the community. 2. Connect Your Hardware Plug your Mixtrack Pro 2 into your computer. Wait for your OS to recognize the MIDI device. Open Rekordbox and enter Performance Mode. 3. Import the Mapping Click the MIDI button in the top-right corner.
Select the "Mixtrack Pro 2" tab (it may appear as "Generic MIDI"). Click Import at the bottom. Locate the file you downloaded and select it. If prompted to "Reset to Default," select No. 4. Audio Routing Go to Settings > Audio. Ensure Audio Device is set to "Mixtrack Pro 2." Set Output Channels to: Master Out: Mixtrack Pro 2 Ch 1/2. Headphones: Mixtrack Pro 2 Ch 3/4. ⚠️ Known Limitations
Jog Wheel Sensitivity: Mapping the touch-capacitive wheels can be "glitchy" compared to Serato.
LED Feedback: Some lights (like level meters) may not sync perfectly with the software.
License Requirement: You need a Rekordbox Creative or Professional plan (or a hardware unlock device) for Performance Mode to work with third-party controllers.
💡 Pro Tip: If the mapping you found doesn't work for a specific button (like the Filter knob), you can click "Add" in the MIDI window, press the physical button on your controller, and manually assign it to the Rekordbox function. Do you have the mapping file already, or
While the Numark Mixtrack Pro 2 Go to product viewer dialog for this item.
was originally built for Serato DJ Intro, it is a class-compliant MIDI controller that can be mapped to work with various DJ software, including Rekordbox. However, mapping it to Rekordbox requires specific steps and carries certain limitations, particularly regarding the jog wheels. Core Requirements for Rekordbox Mapping
To enable MIDI mapping for a non-Pioneer controller like the Mixtrack Pro 2 , you must meet one of the following criteria in Rekordbox:
Subscription Plan: You generally need a paid subscription (such as the Rekordbox Core plan) to unlock the MIDI Learn feature.
Hardware Unlock: Alternatively, having a supported hardware unlock device connected can enable these performance features. The Jog Wheel Limitation A critical hurdle when mapping the Mixtrack Pro 2
to Rekordbox is that the software does not natively allow MIDI mapping of jog wheel functions (scratching and pitch bending) for third-party controllers.
Standard Mapping: Most buttons, sliders, and knobs can be easily assigned using the MIDI Learn function.
Complex Workaround: Mapping jog wheels typically requires advanced "hacking" of Rekordbox CSV files, which is technically demanding and more difficult on Windows systems than on Mac. Because of this, many users choose to stick with Serato or switch to a native Rekordbox controller like the Pioneer DDJ-400. How to Manually Map the Mixtrack Pro 2
If you have a subscription and want to map everything except the jog wheels, follow these steps: Connect Hardware: Plug your Mixtrack Pro 2 into your computer via USB.
Open MIDI Settings: Launch Rekordbox in Performance Mode. Click the MIDI button located at the top right of the main interface (next to the gear icon). Use MIDI Learn:
Select the tab for the function you want to map (e.g., DECK, MIXER, or BROWSE). ADD to find a specific command, then click LEARN. Move the corresponding knob or press the button on your Mixtrack Pro 2 to link it to that software function.
Save/Export: Once finished, you can use the EXPORT button to save your custom mapping as a CSV file for future use. Finding Pre-made Mapping Files
While official Rekordbox mappings for Numark gear are rare, community-driven sites like DJ TechTools host various user-created MIDI maps. You can download these files and use the IMPORT button in the Rekordbox MIDI window to apply them instantly.
Numark Mixtrack Pro II does not have an official Pioneer-provided MIDI mapping for Rekordbox Pioneer DJ
. While the hardware uses standard MIDI protocols, Rekordbox is primarily designed for Pioneer hardware, meaning you must manually configure most controls using the MIDI Learn Essential Setup Requirements Subscription:
To access MIDI mapping (MIDI Learn) for third-party controllers, you generally need a Rekordbox Core plan Pioneer DJ Connection:
Connect your Mixtrack Pro II to your computer via USB. It is class-compliant, so no additional drivers are required for Windows or macOS Known Mapping Limitations numark mixtrack pro 2 rekordbox mapping
Before starting a manual mapping, be aware of these standard Rekordbox restrictions for non-Pioneer controllers: Jog Wheels:
Rekordbox typically prevents third-party jog wheels from being mapped for scratching or pitch bending through the standard MIDI Learn interface Pioneer DJ Shift/Modifiers:
Mapping a dedicated "Shift" button for secondary functions is often restricted or requires complex workarounds with external software Crossfader Inversion:
Users have reported issues where the crossfader might move in the opposite direction in Rekordbox compared to the hardware movement Pioneer DJ How to Manually Map Functions If you choose to create your own mapping, use the Rekordbox MIDI Learn Open MIDI Window:
button in the upper right corner of Rekordbox (Performance Mode) Select Device:
Ensure your Mixtrack Pro II is selected in the "Connected Device" dropdown Add Commands: Browse through tabs (Deck, Mixer, FX) and click to choose a command (e.g., Play/Pause)
button for that command, then press the physical button or move the knob on your Mixtrack Pro II button to save your custom mapping as a file for backup Recommended Alternatives
Because of the jog wheel and shift limitations, many users recommend alternative software for this specific controller:
Mapping the Numark Mixtrack Pro 2 Go to product viewer dialog for this item.
to Rekordbox is possible but comes with significant technical hurdles, as the software does not natively support this legacy controller. While you can manually map almost every button and fader, Pioneer DJ explicitly states that the jog wheels cannot be natively mapped for scratching or standard playback control. Compatibility and Requirements Mixtrack Pro 2
was designed primarily for Serato DJ Intro. To use it with Rekordbox, you must meet specific software requirements:
Subscription or Unlock: You need a paid Rekordbox subscription (such as the "Core" plan) or a "Hardware Unlock" device to access the MIDI mapping features. The Mixtrack Pro 2 itself is not a hardware unlock device.
Manual Effort: There is no official mapping file provided by AlphaTheta (formerly Pioneer DJ). You must use the MIDI LEARN function within the software to build your own configuration. Known Mapping Issues
Users who have attempted this custom setup often report several functional glitches that require careful manual adjustment:
Inverted Controls: A common issue is the crossfader and tempo faders behaving in reverse (e.g., moving the fader up decreases BPM in the software).
Jog Wheel Workaround: Standard mapping through the MIDI menu does not enable jog wheel functionality. Some community members suggest complex third-party "hacks" to bypass this limitation, though these are difficult to implement on Windows systems.
Performance Pads: While basic pad functions like Hot Cues can be mapped, advanced features like Slicer or specialized Loop modes may require you to sacrifice existing pad mappings to make room. How to Start Mapping
If you choose to proceed with a manual setup, follow these steps in Rekordbox:
Open MIDI Menu: Click the "MIDI" button located at the top right of the Rekordbox interface (next to the gear icon). Select Device: Ensure " MixTrack Pro II " is selected in the device window. Use MIDI LEARN: Go to the relevant tab (Deck, Mixer, FX, etc.). Click "ADD" to select a software function.
Enable the "Learn" button, then move the corresponding fader or press the button on your controller to link them.
Audio Configuration: Go to Preferences > Audio and ensure the Mixtrack Pro 2
's built-in sound card is selected for both Master and Headphones.
Due to these complexities, many users eventually opt for a Rekordbox-native controller, like the Pioneer DDJ-400, to avoid the manual mapping process. Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ
Numark Mixtrack Pro II was originally designed for use with Serato DJ Intro
. While it is a class-compliant MIDI controller that can technically work with almost any DJ software, mapping it to
requires manual configuration and comes with specific hardware limitations, particularly regarding the jog wheels. Pioneer DJ Compatibility and Core Limitations No Official Mapping:
Pioneer DJ does not provide an official mapping file for the Mixtrack Pro II Jog Wheel Support:
rekordbox restricts native MIDI mapping for jog wheels on third-party controllers. While buttons and faders can be mapped easily, the platters for scratching or pitch bending will likely not function without complex third-party workarounds. Software Requirements:
To enable MIDI mapping in rekordbox, you must have a paid subscription or use a hardware unlock device. Pioneer DJ How to Manually Map the Mixtrack Pro II Right-click rekordbox app -> Get Info -> Check
Since there is no "plug-and-play" CSV or TSI file officially supported by Pioneer for this controller, you must use the MIDI Learn feature in rekordbox. Mixtrack Pro - Numark
Mapping the Numark Mixtrack Pro 2 to Rekordbox is a popular workaround for DJs who want to use Pioneer’s ecosystem without buying new hardware. While the controller was originally built for Serato DJ Intro, its standard MIDI protocol allows it to function with Rekordbox 6—provided you are willing to do some manual setup. The Reality Check: Official Support vs. Custom Mapping
Pioneer DJ does not provide an official mapping for the Mixtrack Pro 2. This means you cannot simply download a file from their website and start playing.
Hardware Unlock: To enable MIDI mapping in Rekordbox, you typically need a subscription or a "Hardware Unlock" device connected.
Jog Wheel Limitation: One major hurdle is that Rekordbox often restricts the "jog function" (the touch-sensitive platter movement) for non-Pioneer controllers. While buttons and faders map easily, getting the platters to scratch like they do in Serato requires advanced workarounds. How to Map the Mixtrack Pro 2 in Rekordbox
If you have a Rekordbox subscription or compatible hardware, you can use the MIDI Learn feature to build your own profile:
Connect Your Gear: Plug the Mixtrack Pro 2 into your computer via USB.
Open MIDI Settings: In Rekordbox, look for the MIDI button at the top of the screen (it will be highlighted if your controller is detected). Use the "Learn" Function: Select a tab (e.g., DECK or MIXER).
Click ADD and choose the function you want (e.g., Play/Pause, EQ High, or Crossfader).
Click the LEARN button next to the command, then move the corresponding button or knob on your Numark controller.
Fixing Inversions: Users often find that certain controls, like the crossfader or tempo sliders, might act in reverse (e.g., moving the fader up decreases BPM). Rekordbox does not have a "reverse" checkbox for every parameter, so you may need to adjust your physical movement style or look for third-party .csv mapping files that have corrected these values. Known Issues & Troubleshooting
Audio Output: Ensure your Mixtrack Pro 2 is selected as the Audio Device in Rekordbox preferences so that sound comes out of the RCA outputs or headphone jack.
Performance Pads: The Mixtrack Pro 2 pads are switches, not velocity-sensitive pads. They map well to Hot Cues and Manual Loops, but navigating multiple modes (FX vs. Sampler) can be "fiddly" compared to native software.
Sharing Mappings: Since there is no official file, many DJs share their custom mappings as CSV files on community forums like the Pioneer DJ Forums or Reddit.
For those who find the Rekordbox mapping too limited, the Mixtrack Pro 2 remains natively supported by Serato DJ and has extensive community mappings for Mixxx and Traktor Pro 2. Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ
The Numark Mixtrack Pro 2 is a classic entry-level DJ controller originally designed for Serato DJ Intro. While it lacks native "Plug-and-Play" support for Rekordbox, you can successfully use it with Pioneer's software through custom MIDI mapping. Core Compatibility & Requirements
To map the Mixtrack Pro 2 to Rekordbox, you must meet certain software requirements:
Performance Mode: You must use Rekordbox in Performance Mode.
Hardware Unlock or Subscription: Unlike Pioneer controllers (e.g., DDJ-FLX4), the Mixtrack Pro 2 does not "unlock" Rekordbox for free. You generally need a Creative or Professional subscription plan (or a Hardware Unlock device connected alongside it) to enable the MIDI Learn function for third-party controllers.
The Jog Wheel Limitation: A critical technical hurdle is that Pioneer often restricts third-party MIDI controllers from using touch-sensitive jog wheel functions (scratching) within Rekordbox. Basic pitch bending may work, but advanced scratching often requires unofficial "hacks" like renaming the MIDI device in your OS. How to Manually Map Your Controller
If you cannot find a pre-made .csv mapping file for the Mixtrack Pro 2, you can create your own using the MIDI Learn feature: Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ
The Numark Mixtrack Pro 2 requires manual MIDI mapping in Rekordbox DJ, as there is no official mapping file available from Pioneer DJ. Users can configure controls using the MIDI Learn function in Rekordbox, though jog wheel functionality often requires third-party scripts to work correctly. For more details, visit Pioneer DJ forums. Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ
Mapping the Numark Mixtrack Pro 2
to Rekordbox is possible but requires manual setup. Because Rekordbox is a Pioneer DJ product, it does not offer official "plug-and-play" support for Numark hardware. 🛠️ Compatibility Requirements Hardware Unlock: The Mixtrack Pro 2 is not a "Hardware Unlock" device for Rekordbox.
Subscription Required: You must have a paid subscription (such as the Core plan) to access the MIDI Learn feature.
Manual Mapping: Since there is no official mapping file, you must use the "Learn" function to assign every button, knob, and fader manually. 📋 Step-by-Step Manual Mapping Connect Hardware: Plug your Mixtrack Pro 2 into your computer via USB.
Open Rekordbox: Launch the software and ensure you are in Performance Mode. Access MIDI Settings:
Click the MIDI button in the top-right corner of the main interface. Select Device: Ensure " Mixtrack Pro II " is selected in the device dropdown list. Assign Controls:
Click the Add button for a specific function (e.g., Play/Pause). Click Learn. Press the corresponding button on your Mixtrack Pro 2 . Repeat this for all faders, EQs, and transport controls. ⚠️ Known Limitations Q: Can I export my custom map to share with a friend
Jog Wheel Issues: Rekordbox often restricts jog wheel mapping for non-Pioneer controllers. You may be able to map them for pitch bending, but scratch functionality often requires complex workarounds or third-party "hacks".
Crossfader Reversal: Some users report the crossfader moving in the opposite direction in Rekordbox. There is no simple "reverse" checkbox, so double-check the MIDI CC values during mapping.
Shift/Modifiers: Mapping "Shift" combinations can be difficult without external MIDI translation software. 💡 Better Alternatives
If you find the Rekordbox mapping too technical or limited, consider these platforms with native support: Serato DJ Lite/Pro: The Mixtrack Pro 2 was specifically designed for Serato Support and works instantly.
Virtual DJ: Offers native support with no manual mapping required.
Mixxx: A free, open-source option with community-made mapping files for the Mixtrack Pro II . Mixtrack Pro II - Numark
The Numark Mixtrack Pro II Go to product viewer dialog for this item.
is a classic entry-level controller primarily designed for Serato DJ. While it uses standard MIDI, using it with Pioneer’s rekordbox requires significant manual effort, as it is not natively supported. Core Compatibility Challenges No Native Mapping: Unlike Pioneer's own controllers, the Mixtrack Pro II
is not "plug-and-play" for rekordbox. Official mappings from Numark or Pioneer are not available.
The Jog Wheel Hurdle: rekordbox does not typically allow easy mapping of jog wheels for third-party controllers. While buttons and faders can be mapped, getting the platters to scratch or pitch-bend accurately is often impossible without complex workarounds.
Hardware Unlock: To even access MIDI mapping in rekordbox, you generally need a paid subscription (Core plan or higher) or a "Hardware Unlock" device connected to your system. Manual Mapping Process
If you choose to proceed, you must use the MIDI Learn function within rekordbox:
Open MIDI Menu: In rekordbox Performance mode, click the MIDI button at the top right. Select Device: Ensure the Mixtrack Pro II is selected in the device list.
Learn Functions: Choose a software function (e.g., Play, Cue, Fader), click Learn, and then press the corresponding button on your controller.
Known Issue: Some users have reported the crossfader moving in the opposite direction when mapped manually, a common glitch with non-Pioneer hardware. Better Alternatives
Given the mapping limitations, most DJs recommend one of the following paths: Mixtrack Pro II - Numark
The Mixtrack Pro 2 has four pad modes (Hot Cue, Loop, Sample, FX). These must be mapped via MIDI notes and a mode selector variable.
Suggested mapping:
| Pad Mode | Pad 1 | Pad 2 | Pad 3 | Pad 4 | |----------|-------|-------|-------|-------| | Hot Cue | Hot Cue 1 | Hot Cue 2 | Hot Cue 3 | Hot Cue 4 | | Loop | Active Loop | Set Loop In | Set Loop Out | Loop 1/2x | | Sample | Sampler Slot 1 | Sampler Slot 2 | Sampler Slot 3 | Sampler Slot 4 | | FX | FX1 On | FX1 Select | FX2 On | FX2 Select |
Note: Native pad modes require MIDI feedback LEDs. Rekordbox can send MIDI out to illuminate pads.
You cannot simply download a map and pray. You need the correct architecture.
Every DJ plays differently. The beauty of a custom Numark Mixtrack Pro 2 rekordbox mapping is that you aren't locked into Pioneer’s layout. Here are common customizations.
If you’re reading this, you probably already know that the Numark Mixtrack Pro II is a workhorse of a controller. It’s durable, intuitive, and perfect for beginners or DJs on the go. However, there is one major headache for Mixtrack owners: Numark and Pioneer DJ don’t always play nice.
Officially, the Mixtrack Pro II is designed for Serato DJ. Out of the box, Pioneer’s Rekordbox software won’t recognize it. But what if you want to switch to the industry-standard Rekordbox ecosystem without buying a new controller?
Good news: You don't need to buy new gear. You just need a MIDI mapping.
In this guide, we’ll walk you through how to get your Mixtrack Pro II running smoothly in Rekordbox using MIDI mapping.
One common issue with mapping the Mixtrack Pro II to Rekordbox is the Jog Wheels. Because Rekordbox doesn't have native "scratch" logic for this specific controller, the jog wheels are often mapped simply as "Pitch Bend" (nudging the track faster/slower) rather than true scratching.
How to map the Jog Wheels manually (if needed):