Mxq Amlogic S805 Android 511 Lollipop Download Install -

Introduction

The MXQ Amlogic S805 TV box was a staple of the budget Android media player market during the mid-2010s. For many, it was their first introduction to turning a "dumb" TV into a Smart TV. Running on the quad-core Amlogic S805 processor and originally shipping with Android 4.4 KitKat (and later updated to Android 5.1.1 Lollipop), these little black boxes were workhorses.

However, time has not been kind to the software. Many units suffer from sluggish performance, outdated Kodi versions, or boot loops. If you are holding one of these devices, you might think it’s time for the trash. But with a bit of effort, you can breathe new life into it by flashing a fresh stock firmware.

This deep-dive article covers everything you need to know about the MXQ S805, focusing on locating the correct Android 5.1.1 Lollipop firmware, the installation process, and the risks involved.

Before downloading any firmware, the user must identify:

Verification method: Open the case (warranty void) and visually inspect.

Required:

Steps summary:

Upgrading an MXQ Amlogic S805 TV box to Android 5.1.1 Lollipop is a popular modification for older hardware, as it allows users to run more recent applications like Kodi 17.x Krypton. Important Compatibility Warning

Hardware Variants: There are many variations of MXQ boards. This firmware typically works for HD and Q models with 1GB of RAM.

Unsupported Devices: It is not expected to work on "Blink" versions or the M21D model, which only have 512MB of RAM.

Risk: Flashing custom firmware can potentially break (brick) your hardware. Ensure you have a recovery plan before proceeding. Required Tools and Files

Firmware Image: You will need an Android 5.1.1 Lollipop image file specifically ported for the processor (often adapted from the K1 box or Minix Neo X6).

Installation Media: A formatted SD Card (FAT32) or a Windows PC with a male-to-male USB cable. Software Tools: TWRP Recovery: Used for SD card installations

Amlogic USB Burning Tool: Used for PC-based flashing (recommended version for is often an older build like v2.0.5). Installation via SD Card (TWRP Method)

This is the most common method for users who want to avoid connecting to a PC. mxq amlogic s805 android 511 lollipop download install

The MXQ Amlogic S805 is a legacy Android TV box that originally shipped with Android 4.4 KitKat. Upgrading it to Android 5.1.1 Lollipop is a popular modification to extend the device's life, though it comes with risks due to the many hardware variations of the MXQ board. Core Specifications Processor: Amlogic S805 Quad Core ARM Cortex A5 (1.5 GHz). GPU: Quad-core Mali-450MP. Memory: Typically 1GB DDR3 RAM (some "clones" use 512MB). Storage: 8GB NAND Flash.

OS Support: Originally 4.4.2; unofficial community builds provide 5.1.1. Download and Firmware Sources

Finding reliable 5.1.1 firmware for this specific chipset often requires looking for ported ROMs originally built for similar devices like the K1 or Minix Neo X6.

Amlogic USB Burning Tool: Required for PC-based flashing via USB.

TWRP Recovery: Often used as an intermediate step to flash newer Android versions or LibreELEC.

Community Forums: Resources like the MXQ Project YouTube Playlist and Google Groups often host firmware links and updated guides. Installation Guide (Toothpick Method)

The most common way to install new firmware is the "Toothpick Method" using an SD card.

Guide: MXQ Amlogic S805 Android 5.1.1 Lollipop Download & Install

Upgrading an older MXQ Amlogic S805 TV box to Android 5.1.1 Lollipop can breathe new life into hardware that typically shipped with Android 4.4 KitKat. While the S805 is an older processor, developers like Abdul_pt have created custom Lollipop ROMs that allow users to run more modern apps and improved versions of media players like Kodi. Important Precautions

Before proceeding, understand that the MXQ S805 has dozens of hardware variations (clones). Installing the wrong firmware can "brick" your device (render it permanently unusable). Backup your current system before starting.

This firmware was originally built for the K1 TV box but has been ported to work on many MXQ S805 models (specifically the HD18Q and m201d versions).

It is not recommended for "Blink" versions or devices with only 512MB of RAM. 1. Download Requirements

To perform this update, you will need to gather the following files from reliable community forums like the MXQ Project or Freaktab:

Lollipop 5.1.1 ROM Image: Look for the Abdul_pt Lollipop build specifically for the S805.

TWRP Recovery: A custom recovery file (usually recovery.img) is required to flash the new OS. Introduction The MXQ Amlogic S805 TV box was

Amlogic USB Burning Tool: If you prefer updating via PC rather than an SD card. 2. Installation via SD Card (The "Toothpick Method")

This is the most common method for updating MXQ boxes without a PC.

You're looking for information on installing Android 5.1 Lollipop on an MXQ device with an Amlogic S805 chip.

Device Overview

The MXQ is a TV box based on the Amlogic S805 chipset, which is a quad-core ARM Cortex-A7 processor with a Mali-450MP3 GPU. The device likely came with Android 4.4 KitKat out of the box, but you're interested in upgrading to Android 5.1 Lollipop.

Upgrade Options

There are a few ways to upgrade your MXQ device to Android 5.1 Lollipop:

Installing Android 5.1 Lollipop on MXQ (Amlogic S805)

If you still want to proceed, here are some general steps to install Android 5.1 Lollipop on your MXQ device:

Requirements:

Steps:

Risks and Considerations

Conclusion

While it's possible to install Android 5.1 Lollipop on your MXQ device with an Amlogic S805 chip, it's essential to be aware of the risks and considerations involved. If you're not comfortable with the installation process or the potential risks, you may want to stick with your current Android version or wait for an official update from the manufacturer.

Upgrading an older MXQ Amlogic S805 Android 5.1.1 Lollipop can breathe new life into the device, allowing it to run newer apps like later versions of Kodi that require at least Android 5.0 Before downloading any firmware, the user must identify:

. While the official firmware typically peaked at Android 4.4 KitKat, community-adapted ROMs allow for this leap. Prerequisites & Downloads

Before starting, ensure you have the following hardware and files:

: A full-size SD card (formatted to FAT32) and a thin object like a toothpick or paperclip for the reset button. TWRP Recovery

: Download the "all black SA5 TWRP" recovery image. Rename the file to recovery.img and place it on the root of your SD card. Lollipop Firmware : Download the Android 5.1.1 Lollipop

ZIP file (often referred to as "Abdul’s Lollipop" or adapted from the K1 mobile firmware) and copy it to the SD card. Historically, these files were hosted on the MXQ Project and related community forums. Compatibility

: This firmware is designed for "all-black" MXQ models (HD18Q or Q models) with 1GB of RAM

. It is generally not compatible with "Blink" versions (red stripe) or 512MB RAM models. Installation Guide (Toothpick Method)

The safest way to install the new OS is through a custom recovery like TWRP. Prepare the SD Card recovery.img and the firmware

file are both in the root directory of your FAT32-formatted SD card. Enter Recovery Mode Unplug the power cable from the MXQ box. Insert the SD card into the box. Locate the hidden reset button inside the on the back. Press and hold this button with a toothpick.

While holding the button, plug the power cable back in. Continue holding until the TWRP screen appears on your TV. Flash the Firmware In TWRP, it is highly recommended to select

and perform a factory reset (and wipe the system cache) to prevent boot loops. , navigate to your SD card, and select the Lollipop

Swipe to confirm the flash. This process can take several minutes. First Boot : Once complete, select Reboot System . The first boot can take up to 10 minutes ; it may stay on the splash screen for a significant time. Important Considerations Known Issues

: Some users report limited Wi-Fi driver support or shutdown issues with this unofficial port. Alternatives : If you primarily use the box for media, consider

as a dual-boot or standalone option. It is often faster and more stable than Android for Kodi users.

: Flashing firmware carries a risk of "bricking" the device. Ensure you have a backup of your original firmware or know how to use the Amlogic USB Burning Tool for a hard recovery if needed. as a safer alternative?

⚠️ IMPORTANT WARNING:
Flashing the wrong firmware can permanently brick your TV box. This guide is based on generic MXQ S805 hardware. Verify your device’s PCB board markings (e.g., “MXQ V3.1”, “S805 V1.2”) before proceeding.