Mt6895 Flash Tool Updated May 2026

MediaTek releases quarterly updates for the SP Flash Tool. The upcoming v5.2400 (expected Q2 2025) will likely include:

Before using the tool, you must prepare the software environment:

  • Launch SP Flash Tool – Run as Administrator.
  • Load Scatter – Click Scatter-loading → select scatter.txt.
  • Set Download Mode – Choose Download Only (safe) or Firmware Upgrade (full wipe).
  • Power Off Device – Hold Power + Volume Down for 10 seconds.
  • Connect USB – Tool will detect MT6895 in BROM mode automatically.
  • Click Download – Wait for green checkmark (≈3–5 minutes).

    • One of the most common frustrations was the "STATUS_BROM_CMD_SEND_DA_FAIL" error. The updated tool now bundles a MediaTek USB Port v3.2 driver pre-configured for Windows 11 and Windows 10 (22H2+). The installation wizard automatically disables driver signature enforcement temporally and sets up the correct COM ports. mt6895 flash tool updated

    The MT6895 (often marketed as Dimensity 8100 or 9000) requires specific versions of the MediaTek SP Flash Tool due to updated partition handling and security protocols. If you are attempting to flash stock firmware, unbrick a device, or update the OS, you need the correct tool version and drivers.

    Before diving into the tool, it is critical to understand the hardware. The MT6895 is a 5G System-on-a-Chip (SoC) released under the marketing name MediaTek Dimensity 8050. It is a high-end mid-range chip built on TSMC’s N6 (6nm) process technology. MediaTek releases quarterly updates for the SP Flash Tool

    Key specifications of the MT6895:

    Devices using the MT6895 include the Tecno Camon 20 Premier, Lava Agni 2, and several upcoming mid-range flagships. Because this chip handles complex partition schemes (including dynamic partitions for Android 13 and 14), older versions of flashing tools will fail catastrophically when trying to write firmware to it. Launch SP Flash Tool – Run as Administrator

    Based on patch notes from Mediatek's internal RUI (Release Update Index) for Q2/Q3 2024, the MT6895-specific update resolves:

    Run the following test after updating your tool: