Use this when: The system is buggy, you are selling the car, or you need to clear previous owner's data. Warning: This deletes all saved data.
This is accessed through the hidden Service Menu.
There is a massive difference between a "Soft Reset" (restarting the logic) and a "Hard Reset" (factory wiping the memory). Always start with a Soft Reset.
Use this method only if you can access the settings menu and want to erase all personal data.
Steps:
Caution: A factory reset will not fix hardware issues (e.g., a dead touchscreen digitizer). It also will not remove region-locked navigation data.
The Mitsubishi Multi-Communication System (MMCS) is the central infotainment hub found in many modern Mitsubishi vehicles, including the Outlander, Eclipse Cross, Pajero Sport, and ASX. Like any computer, it can occasionally freeze, lag, or experience Bluetooth connectivity issues.
Before booking a costly dealership visit, performing a system reset can often solve these glitches. Here is the complete guide to resetting your MMCS.
You don't need a reset for routine maintenance. You need it when the logic locks up. Common triggers include: mitsubishi multi communication system reset
The Mitsubishi Multi-Communication System (MCS) is the central infotainment hub found in many Mitsubishi vehicles, including the Outlander, Lancer, ASX, and Pajero Sport. It integrates navigation, audio, vehicle settings, and climate controls.
Sometimes, the system may freeze, lag, refuse to connect to Bluetooth, or show a black screen. In most cases, a simple reset will restore normal function without needing a trip to the dealer.
To reset your Mitsubishi Multi Communication System (MMCS) soft reboot by holding the volume button for 10 seconds factory reset through the system settings
. If the screen is unresponsive or locked, specialized button combinations or a physical power cycle may be required. Reset Methods by Scenario Standard Soft Reboot (Recommended First Step) Press and hold the Volume/Power button in the center for approximately 10–15 seconds until the screen restarts.
: Clears minor glitches, connectivity issues (Apple CarPlay/Android Auto), and frozen screens without erasing data. Factory Reset (Full Data Wipe) Navigate to General Settings Return all settings to default Factory Reset
: This will permanently erase all personal settings, Bluetooth pairings, and saved navigation data. Accessing Service Mode (Hidden Menu) With the ignition on and radio off, press and hold the buttons simultaneously for From the "Service Mode" menu, you can find Memory Initialization on page 2 to perform a deeper system reset. Unlocking Hands-Free/Bluetooth Pin button and the Seek Track Up (fast forward) button for about Handsfree Module to reset pairing options and passcodes. Troubleshooting Power and Hardware Issues
If the system is completely stuck or the screen is black, try these physical reset steps:
To reset your Mitsubishi Multi Communication System (MMCS) or modern Mitsubishi Connect infotainment unit, you can use several methods depending on whether you want to clear a minor glitch or erase all personal data. 1. Soft Reset (Reboot) Use this when: The system is buggy, you
Use this if the screen is frozen, Bluetooth is acting up, or apps like Apple CarPlay or Android Auto are not responding. This does not erase your data.
Method: Press and hold the Power/Volume button for approximately 10 to 15 seconds.
Result: The screen will go black and then restart, clearing temporary system glitches. 2. Factory Reset (Hard Reset)
Use this if you are selling the car or if a soft reset did not fix the issue. This erases all user data, including saved locations, paired phones, and system settings.
Navigate to Settings: Go to the Settings menu on your screen.
Select System: Tap on System (or General Settings on some models).
Reset: Select Factory Reset or Return all to default. Confirm the action when prompted. 3. Service Menu Reset (For Specific Lockouts)
If you are locked out of the Bluetooth or hands-free system and need to reset the passcode, you can access a hidden service menu on many MMCS models. Caution: A factory reset will not fix hardware issues (e
Combination: Press and hold the Info button and the Seek Track Up (Fast Forward) button simultaneously for about 4 seconds.
Unlock: Navigate to the Handsfree Module menu and select Unlock or Reset to clear existing pairing codes. 4. Bluetooth Troubleshooting
If only Bluetooth is failing, try "forgetting" the connection before performing a full system reset:
On the System: Go to Settings > Connections > Bluetooth, find your device, and select Forget Device.
On your Phone: Remove the "Mitsubishi" entry from your phone's Bluetooth list before attempting to repair.
For more detailed technical guides or specific model updates, you can check the Mitsubishi Connect Support Page or view instructional videos from owners on platforms like YouTube.
Are you experiencing a specific error message or is the screen completely unresponsive?