Kirisun Pt8100 Programming Software < Direct • 2026 >

If you have 50 PT8100s, do not program each manually. After the first radio is perfect, read it into the software. Save the file as master_template.rdt. Then for each new radio: Connect > Write > Select file. This ensures consistency.

You will see a tabbed interface. Focus on the "Channel Information" or "Conventional Channel" table.

Pro Tip: For a repeater channel, set RX to the repeater’s output frequency (what you listen on) and TX to the repeater’s input frequency (what you transmit on). The PT8100 does not have automatic offset calculation like a ham radio—enter both manually.

The Kirisun PT-8100 programming software is a Windows-based application designed to configure, program, and manage Kirisun PT-8100 series portable two-way radios. It streamlines radio setup for technicians and fleet managers by providing an intuitive interface to edit channels, frequencies, tones, power levels, signaling, and other device settings from a laptop.

Key features

Typical workflow

Compatibility and requirements

Best practices

Troubleshooting tips

Where to get it Obtain the official programming software, drivers, and cables from Kirisun’s support or authorized distributors; check model-specific documentation for the correct package.

If you want, I can:

(Invoking related search terms for additional follow-up suggestions.)

The Kirisun PT8100 is a digital two-way radio, and programming software is often required to configure and customize its settings. Here's some general information:

If you're looking for the programming software, I recommend:

Would you like more specific guidance or information on using the programming software?

Kirisun PT8100 programming software (Customer Programming Software or CPS) is a dedicated tool used to configure frequencies, signaling, and advanced features for the Kirisun PT8100 mobile radio series. This software allows users to manage up to 256 channels and customize the radio's five programmable buttons for specific operational needs. Key Features of the Programming Software

The PT8100 software provides a user-friendly interface to manage complex radio settings that cannot be adjusted manually from the front panel: Channel Management

: Program frequencies, channel spacing (12.5kHz or 25kHz), and alphanumeric names for up to 256 channels. Signaling Configuration

: Set up CTCSS/DCS tones, DTMF, and 2-tone/5-tone signaling for private or group calls. Safety Features

: Enable and configure "Lone Worker" mode, security checks, and emergency call behaviors. System Controls

: Customize power levels (High/Middle/Low) per channel, set scan lists, and establish password protection for radio data. Information Retrieval

: Read embedded radio details such as the serial number, MCU software version, and hardware version. Rassbach Communications How to Program the Kirisun PT8100 To program the radio, you need the PT8100 CPS software , a compatible USB programming cable , and a Windows-based PC. Software Installation

: Download the PT8100 CPS (e.g., version V1.28) from an authorized distributor or the Kirisun Download Center file to install it on your computer. Connection Plug the USB end of the programming cable into your PC.

Connect the other end to the accessory/microphone port on the PT8100. Turn on the radio. Configuration Launch the software and select the correct

from the settings menu (check Windows Device Manager if unsure).

to pull the current configuration from the radio to your PC. Modify settings as needed, then click to upload the new configuration back to the radio. Technical Considerations How do I program my radio? - Bendix King

To program a Kirisun PT8100 mobile radio, you need specific Customer Programming Software (CPS), a compatible programming cable, and the correct COM port drivers. 🛠️ Required Components Software: Use Kirisun PT8100 CPS (Common versions include v12 or v12.1).

Hardware: A specialized USB-to-radio programming cable, such as the KSPL-U05.

PC Drivers: Ensure you have the correct USB-to-serial drivers (often Prolific or CH340). Older cables with counterfeit Prolific chips may require downgrading drivers on modern Windows versions to function. 📥 Finding and Installing the Software

Official software is typically restricted to authorized partners via the Kirisun Download Center. If you cannot access the official portal, you may find the setup files on radio enthusiast sites or through regional distributors. Extract files: Download the ZIP and run setup.exe.

Language Check: If the interface appears in Chinese, look for a settings menu (often marked with an "S") and select English (L). kirisun pt8100 programming software

Connection: Plug the cable into your PC and the radio’s accessory port before turning the radio on. ⌨️ Programming Steps

Identify COM Port: Open your PC’s Device Manager to see which COM port (e.g., COM3) the cable is using.

Read Data: In the software, select the correct COM port and click Read to download the current "codeplug" (settings) from the radio. Modify Settings: Channels: Enter frequencies for up to 256 channels. Signaling: Configure CTCSS, DCS, or 5-Tone signaling.

Buttons: Assign functions (like Scan or Squelch) to the 5 programmable keys.

Write Data: Click Write to upload your new configuration to the radio.

💡 Pro Tip: Always save a backup of the original radio data before making any changes.

Alex sat in the dimly lit cab of his recovery truck, the rain drumming a steady, rhythmic beat against the windshield. In the center console, the Kirisun PT8100 glowed with a stubborn, amber light. It was a rugged piece of hardware, built to survive the dust of construction sites and the vibrations of heavy machinery, but tonight, it was silent.

The fleet had recently moved to a new set of frequencies to avoid the interference crawling over the old analog bands. Without the update, Alex was an island. He opened his laptop, the screen’s blue light cutting through the shadows of the cabin.

He connected the 8-pin programming cable to the mic jack of the radio. It felt like a surgical procedure. On the screen, he launched the PT8100 programming software. The interface was utilitarian—no flashy graphics, just rows of frequency fields, CTCSS tones, and squelch settings. "Come on," he muttered, clicking the 'Read' button.

A progress bar crawled across the screen. The radio gave a sharp, reassuring beep as the computer sucked the data out of its brain. Alex began to type. He entered the new RX and TX frequencies for the dispatch channel. He toggled the Wide/Narrow band settings and labeled the first channel 'BASE-HQ'.

He knew one wrong digit would mean static or, worse, transmitting into the void. He double-checked the PL tones, ensuring his radio would "handshake" correctly with the company repeater.

With a final click, he hit 'Write'. The PT8100’s display flickered. 'PROGRAM' flashed in blocky letters across its small screen. The progress bar reached 100%.

Alex reached for the heavy hand-mic. He keyed the PTT button, the red transmit LED blooming like a small ember. "Recovery One to Base, radio check, over."

The silence lasted only a second before a crisp, clear voice crackled through the truck’s speaker. "Loud and clear, One. Welcome back to the grid."

Alex smiled, closed his laptop, and shifted the truck into gear. The software had done its job; the island was connected again.

If you are looking to actually program this radio, I can help you with the technical steps. Let me know: Do you have the KSP8100 software installed? Do you have the USB-to-8-pin programming cable?

Are you trying to set up standard frequencies or a repeater offset?

Introduction

The Kirisun PT8100 Programming Software is a powerful tool designed to facilitate the programming and configuration of the Kirisun PT8100 digital two-way radio. This software provides a user-friendly interface for radio technicians and administrators to program, monitor, and troubleshoot the radio's functions.

Key Features

User Interface

The Kirisun PT8100 Programming Software features an intuitive and easy-to-use interface, with clear menu navigation and toolbar icons. The software displays radio parameters in a clear and organized manner, allowing users to quickly and easily configure the radio.

System Requirements

Benefits

Support

The Kirisun PT8100 Programming Software is supported by a comprehensive user manual and technical support resources, including online FAQs, troubleshooting guides, and contact information for Kirisun technical support specialists.

Here are some general details about the Kirisun PT8100 programming software:

Software Name: Kirisun PT8100 Programming Software (or CPS, short for Customer Programming Software)

Functionality: The software allows users to:

Operating System Compatibility: The Kirisun PT8100 programming software is typically compatible with Windows-based operating systems, such as Windows XP, Windows 7, Windows 8, and Windows 10.

Software Availability: The Kirisun PT8100 programming software can usually be obtained from the manufacturer's website or through authorized dealers. Users may need to register or provide proof of purchase to access the software. If you have 50 PT8100s, do not program each manually

If you're looking for a specific piece of information or would like to download the software, I recommend visiting the Kirisun official website or contacting their customer support directly. They should be able to provide you with the necessary resources and assistance.

Kirisun PT8100 programming software (often referred to as Kirisun PT8100 CPS

) is the primary tool used to configure and manage the PT8100 series of VHF/UHF analog mobile radios. This software allows users to customize up to 256 channels, set signaling tones like CTCSS/DCS, and enable advanced safety features such as Lone Worker and Security Check. Software Overview & Compatibility Version History : Common stable versions include OS Support : Older versions (v1.20) are known to work well on Windows XP SP3 , while newer iterations like v1.29 are compatible with Windows 7 Professional : While some versions are available on the official Kirisun Download Center

, access often requires an authorized dealer login for specific technical documents and the latest CPS builds. Core Programming Features

The PT8100 software provides deep customization for professional and amateur radio needs: Channel Management

: Configure frequency, bandwidth (12.5/25 kHz), and RF power levels for each of the 256 available channels Signaling Options : Full support for 2-Tone, 5-Tone, and DTMF

encoding and decoding, which enables private calls, group calls, and remote "stun/kill/revive" commands. Programmable Keys : Set functions for up to 5 programmable buttons

(P1-P5) for quick access to features like Home Channel, Scan, or Squelch Off. Safety Settings : Define parameters for Lone Worker Security Check

modes, which trigger emergency alarms if a user fails to interact with the radio at preset intervals. Scanning Templates : Create up to 16 scan templates

per channel, allowing for complex scanning lists in large workgroups. Essential Hardware & Setup To use the software, you need the following hardware: Programming Cable

: A USB-to-radio cable that connects to the accessory port on the radio's side or front microphone jack. COM Port Configuration

: After connecting, users must identify the correct COM port in the computer's Device Manager and select it within the software settings. Radio Data Transfer

: Pulls current settings from the radio to the PC for modification. : Pushes the new configuration back to the radio. Troubleshooting Common Issues Connection Errors

: Often caused by incorrect port assignments or outdated USB-to-Serial drivers. Ensure your computer recognizes the cable as a valid COM port. Data Protection : The software allows for Password Protection

to prevent unauthorized reading or writing of the radio's data. Power-On Options

: You can use the software to set the radio to switch on automatically with the vehicle's ignition switch DMR Two Way Radios - Kirisun

The Kirisun PT8100 programming software is the essential utility for configuring the Kirisun PT8100 professional mobile radio. This software allows users to manage up to 256 memory channels and customize advanced signaling features across various frequency bands, including VHF (136–174 MHz), UHF (400–450 MHz, 438–490 MHz), and Midband (66–88 MHz). Key Features of PT8100 Software

Channel Management: Program frequencies, channel spacing (12.5/25 kHz), and power levels (5W/10W/25W) for each of the 256 available channels.

Signaling Configuration: Set up 2-Tone, 5-Tone, and DTMF encode/decode for group calls, private calls, and remote functions like kill, stun, and revive.

Programmable Buttons: Assign specific functions to the radio’s five programmable keys, such as "Home Channel," "Monitor," or "Emergency".

Security & Protection: Enable password protection to prevent unauthorized reading or writing of radio data.

Advanced Features: Configure "Lone Worker" safety intervals, "Public Address" (PA) mode, and "Talk Around" for direct communication when out of repeater range. Software Installation and Setup

To begin programming, you will need a PC running Windows (compatible with versions such as XP, 7, 8.1, or 10) and a dedicated Kirisun programming cable (typically USB-to-radio connector).

Driver Installation: Install the necessary drivers for your programming cable (often Prolific PL2303) before connecting the hardware.

Cable Connection: Plug the USB end into your computer and the other end into the accessory port on the radio.

Radio Power: Ensure the radio is connected to a stable power source (13.6V DC) and turned on during the process.

COM Port Selection: Launch the software and select the correct COM port identified in your computer's Device Manager. How to Program the PT8100

Read Data: Always start by clicking the "Read" button to download the current configuration from the radio.

Edit Settings: Navigate through tabs to modify channel frequencies, CTCSS/DCS tones (OST function), and scan lists (up to 32 channels per list).

Write Data: Once modifications are complete, click "Write" to upload the new settings. Do not disconnect the cable until the progress bar reaches 100%. Troubleshooting Common Issues Kirisun Programming Software Pt8100 12 1 - Facebook

The Kirisun PT8100 is a rugged, versatile mobile radio widely used in commercial and public safety sectors. To unlock its full potential, understanding its dedicated Programming Software (CPS) is essential. This software serves as the bridge between the hardware’s raw capabilities and the specific communication needs of a fleet. The Role of Programming Software Typical workflow

Unlike consumer walkie-talkies, the PT8100 requires precise configuration to operate within legal frequency bands and to interface with existing systems. The software allows technicians to define frequency assignments, signaling protocols, and privacy codes (CTCSS/DCS) that prevent interference from other users on the same channel. Key Functional Areas

Channel Management: The PT8100 supports up to 256 channels, organized into groups. The software enables the batch editing of these channels, allowing for quick deployment across multiple vehicles.

Signaling and Emergency Features: Through the software, users can configure 2-Tone, 5-Tone, and DTMF signaling. More importantly, it allows for the setup of "Emergency Mode," defining which button triggers a distress signal and which channel it broadcasts on.

Performance Tuning: Technicians can adjust squelch levels, transmit power (High/Low), and scan lists. This ensures the radio is optimized for its specific environment, whether that is a dense urban area or a sprawling rural site.

Customization: The software allows for the "Key Assignment" of the front-panel buttons. This means functions like "Talkaround," "Monitor," or "Public Address" can be mapped to specific buttons based on user preference. Best Practices for Use

Successful programming requires a compatible USB-to-Serial programming cable and the correct driver installation. A critical step often overlooked is reading the radio before attempting to write to it. Saving a "template" or backup file of the original factory settings is a vital safety net in case of configuration errors. Conclusion

The Kirisun PT8100 programming software is more than just a utility; it is a management tool. By mastering its interface, organizations can ensure their communication remains secure, organized, and responsive to the demands of their operational environment. To help you get started, let me know:

Do you have the programming cable and correct drivers installed? Are you looking to set up digital or analog channels?

Kirisun PT8100 programming software is the essential tool for configuring this professional mobile radio, primarily available as the PT8100 CPS (Customer Programming Software) . While early versions like

are known for their stability on older systems, the latest widely recognized version is Software & Requirements Version History : Users have reported better success with on Windows XP SP3, whereas

are typically used for newer Windows versions and specific mid-band (66–88 MHz) radio variants. Operating Systems : It is primarily compatible with Windows XP . Users on modern systems may need to run it in a virtual machine (like VirtualBox) if they encounter driver or port issues. Hardware Interface

: Programming requires a dedicated PC-to-radio cable, often identified by the accessory code Key Programmable Features

The software allows you to customize the following functions: Channel Management : Configure up to 256 channels

across 16 zones, setting specific frequencies and channel spacing (12.5/25 kHz). Tone-Signaling : Set up built-in CTCSS, DCS, DTMF

, and 2-tone or 5-tone encoders/decoders for selective calling. Scanning Lists : Create up to 16 scan templates , choosing between normal and priority scan modes. Security & Safety Lone Worker mode, security checks, and Remote Kill/Stun/Revive functions. Personalization : Map functions to the 5 programmable keys

and customize alert tones by inputting specific sound frequencies. Where to Find the Software

Official downloads are typically restricted to authorized partners, but you can find resources at: Official Kirisun Download Center : The manufacturer hosts the PT8100 CPS V1.28 Specialized Forums : Technical communities like Radioscanner.ru

often host older or alternative versions for troubleshooting. : Some vendors like Radiotronics Rassbach Communications provide software packages with the purchase of hardware. once you have the software installed? Programming error Kirisun PT8100 - Two Way Radio Forum

The Kirisun PT8100 Programming Software (CPS), often referred to by its executable name KSP8100.exe, is the official utility for configuring the PT8100 mobile radio. It is generally considered a straightforward, functional tool for fleet management, though it can have technical quirks typical of older radio software. Key Features & Capabilities

Core Configuration: Easily read and write radio "codeplugs" to set frequencies, channel names, power levels, and squelch.

Signaling Management: Full support for analog signaling, including CTCSS/DCS, DTMF, and 2-Tone/5-Tone selective calling.

Advanced Safety Settings: Configure specialized features like Lone Worker and Security Check, which trigger emergency modes if a user doesn't respond within a set timeframe.

Remote Management: Ability to set up Remote Kill/Stun/Revive functions to disable or reactivate lost or stolen units.

Fleet Maintenance: Includes tools for cloning settings across multiple units and viewing device info (serial numbers, firmware versions) for diagnostics. Review Summary: Pros & Cons Pros Cons

User-Friendly Interface: Simple, step-by-step layout suitable for those without advanced technical skills.

Version Sensitivity: Users have reported that newer versions (e.g., v1.28/1.29) may be "touchy" or fail on older OS like Windows XP; v1.20 is often cited as more stable for legacy setups.

Versatile: Supports various configurations for handheld, mobile, or base station versions of the radio.

Limited Modern OS Support: May require troubleshooting or specific drivers (like the Prolific USB-to-Serial driver) to work on Windows 10 or 11.

Customization: Allows personalized alert tones by inputting specific sound frequencies.

Compatibility Check Required: Not all software versions support every midband (66–88 MHz) or UHF model variant. Usage Tips

Verify After Writing: Always perform a "Read" after "Writing" data to your radio to ensure the changes were applied correctly.

Connection Order: Connect the programming cable to your computer first, then to the radio's accessory port, and finally power the radio on.

Troubleshooting: If you experience "Communication Error" messages, double-check your COM Port settings in Windows Device Manager to ensure the software matches the assigned port. Kirisun Programming Software Pt8100 12 1 - Facebook