Step 1: Connection Before plugging the charger into a wall outlet, connect the DC output connector (the round barrel plug or specific connector) to the charging port of your battery pack. Ensuring a snug fit is crucial for efficient power transfer.
Step 2: Power On Once the battery is connected, plug the AC input into a standard wall outlet. jby6201 manual
Step 3: Monitoring the LED Indicator The JBY6201 features an LED light to communicate status: Step 1: Connection Before plugging the charger into
Step 4: Completion Once the LED turns Green (indicating a full charge), disconnect the charger from the wall outlet first, then disconnect the DC plug from the battery. Step 4: Completion Once the LED turns Green
A: Check the RJ45 (Ethernet-like) connection. If still not working, the manual recommends testing with a known-good external display or resetting the mainboard.
| Issue | Possible Cause | Solution | | :--- | :--- | :--- | | LED does not light up | No power from outlet. | Check the wall outlet or try a different socket. | | LED is Green immediately | Battery already full or poor connection. | Check if the DC plug is fully inserted into the battery port. | | Charger gets very hot | Poor ventilation or internal fault. | Unplug immediately. Ensure the vents on the charger casing are not blocked. | | Battery not charging | Battery internal failure. | Test the battery with a multimeter or try a different compatible charger to isolate the fault. |
Per the official JBY6201 manual, observe these safety rules: