Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 Online

Use HPE S100i BIOS Configuration Utility (F10 during boot) or HPE Smart Storage Administrator (SSA) within Windows Server 2022 after driver installation.

Summary

Compatibility with Windows Server 2022

Recommended approach (prescriptive)

Driver and firmware notes

Troubleshooting tips

Support and lifecycle

Quick checklist

If you want, I can provide step-by-step commands for loading the driver during Windows Server 2022 setup or locate the specific HPE driver page for a particular ProLiant model (tell me the server model).

Here’s a sample review for the HPE Smart Array S100i SR Gen10 driver on Windows Server 2022, written from the perspective of an IT administrator:

Title: Works after some effort – not plug-and-play
Rating: ⭐⭐⭐☆☆ (3/5)

Review:
I installed the HPE Smart Array S100i SR Gen10 software RAID controller on a ProLiant DL380 Gen10 running Windows Server 2022. The driver isn’t included in the base OS, so you’ll need to download it manually from HPE’s support site. hpe smart array s100i sr gen10 driver windows server 2022

Pros:

Cons:

Tip: Use the latest driver version (e.g., 8.7.0.118 or newer). Install via pnputil or HPE’s PowerShell script. Don’t forget to enable S100i in UEFI BIOS first.

Bottom line: Good for basic internal storage, but avoid for production workloads needing high IOPS or reliability. Recommended only if you’re stuck with the embedded controller.

The HPE Smart Array S100i SR Gen10 is an entry-level, driver-based software RAID solution integrated into HPE ProLiant Gen10 servers.

While it was originally designed for Windows Server 2016 and 2019, HPE has released a dedicated driver specifically to support Windows Server 2022. 🛠️ Key Driver Features

Operating System Support: Native support for Windows Server 2022 (Standard, Datacenter, and Essentials).

RAID Level Capabilities: Supports RAID 0, 1, 5, and 10 for SATA drives.

Connectivity: Manages up to 14 SATA lanes connected to embedded system board ports.

Management Integration: Fully compatible with the HPE Smart Storage Administrator (SSA) and iLO 5 for remote monitoring and configuration. 🚀 Technical Performance & Limits

HPE Smart Array P408i‑a SR Gen10 12G SAS Modular Controller Use HPE S100i BIOS Configuration Utility (F10 during

HPE Smart Array S100i SR Gen10 is a driver-based (Software RAID) solution integrated into HPE ProLiant Gen10 servers. For Windows Server 2022

, a dedicated driver is available to enable full functionality and RAID management, as the OS installation media does not include these drivers natively. Hewlett Packard Enterprise Driver Details & Support Support Status: Windows Server 2022 is fully supported. Key Version: 1010.14.0.0(C)

(or newer) is the primary driver for Windows Server 2022. Note that older versions like 106.12.6.0(D) primarily targeted Server 2019 but may still load on Server 2022. Functionality:

Supports RAID levels 0, 1, 5, and 10 for up to 14 SATA drives. It operates in "Mixed Mode," allowing both RAID and HBA (Host Bus Adapter) operations simultaneously. Hewlett Packard Enterprise Installation & Deployment

Since Windows Server 2022 will not see your RAID volumes by default, you must provide the driver during the OS setup. Hewlett Packard Enterprise

Installing Windows Server 2022 on HPE Gen10 servers often hits a snag when the installer fails to see any hard drives. This happens because the HPE Smart Array S100i SR Gen10 is a software-based RAID controller whose drivers aren't included in the standard Windows installation media.

To successfully set up your server, you must manually provide the driver during the "Where do you want to install Windows?" step of the setup process. Essential Driver Details

The S100i SR Gen10 (S-class) is an entry-level solution designed specifically for Windows environments. It supports up to 14 SATA lanes and RAID levels 0, 1, 5, and 10.

Official Driver Source: You can download the latest version from the HPE Support Center, which officially supports Windows Server 2022.

Version Note: Always use the driver labeled for "Windows Server 2022" to ensure full compatibility and stability. Step-by-Step Installation Guide 1. Preparation Download the .exe driver package from the HPE website.

Run the file on a separate PC and select the Extract option. Compatibility with Windows Server 2022

Copy the extracted folder (containing the .inf files) to a USB flash drive. 2. Enable Software RAID in UEFI

Before installing the OS, ensure the controller is in the correct mode: Reboot the server and press F9 to enter System Utilities.

Navigate to System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options.

Set Embedded SATA Configuration to Smart Array SW RAID Support.

Note: This controller only works in UEFI Boot Mode; it does not support Legacy BIOS. 3. Inject the Driver During Setup

If the server is already running but missing the S100i driver (showing as “Standard SATA AHCI Controller” in Device Manager):

You can also manually update via .inf:

Not all Gen10 servers have the S100i. Many use the MR416i or P408i. To verify:

If your server has the S100i, proceed with the driver install.

If you are installing via a USB/ISO media and not using Intelligent Provisioning, follow these steps: