| Parameter | Min | Typ | Max | Unit | | :--- | :--- | :--- | :--- | :--- | | P+ to P- voltage (operating) | 9.0 | 11.55 | 12.6 | V | | P+ to P- voltage (protection trip) | 4.2 (per cell under) | – | 4.35 (per cell over) | V | | SMBus logic low (VIL) | – | – | 0.8 | V | | SMBus logic high (VIH) | 2.1 | 3.3 | 3.6 | V | | SMBus clock frequency | – | 100 | 400 | kHz | | PRES pin impedance (active) | – | 10 | 50 | Ω to GND |
The HP MU06 is a smart lithium-ion battery (typically 3-cell, 41 Wh) used in modern HP consumer laptops. Unlike older batteries with simple positive/negative terminals, the MU06 uses a multi-pin interface for communication, balancing, and safety. Understanding its pinout is critical for: Hp Mu06 Notebook Battery Pinout Configuration
The HP MU06 battery utilizes a 7-position wafer connector. When looking at the battery’s own connector (with the locking latch facing up or away from you, and the wires leading into the battery pack), the pin numbering is typically from left (Pin 1) to right (Pin 7). | Parameter | Min | Typ | Max
However, an easier approach is to reference the laptop motherboard’s battery connector: Purpose: Allows the laptop to detect that a
| Pin Number | Signal Name | Wire Color (Typical) | |------------|-----------------------|----------------------| | 1 | Battery Ground (GND) | Black | | 2 | Battery Ground (GND) | Black | | 3 | System Management Bus Clock (SMBC) | White / Gray | | 4 | System Management Bus Data (SMBD) | Yellow / Orange | | 5 | Battery Temperature Sense (TH) / NTC | Blue / Brown | | 6 | Battery Positive (B+) | Red | | 7 | Battery Positive (B+) | Red |
Note: Wire colors vary by manufacturer (Simplo, Celxpert, or Dynapack). The above is the most common scheme but always verify with a multimeter before connecting.