Some iRMC versions allow you to load a configuration file from a FAT32-formatted USB drive. Create a file irmc.cfg containing:
user admin password admin
Place it in the root of the USB, plug it into the dedicated iRMC USB port (often labeled "Mgmt"), and power cycle the server.
Unlike some hardware vendors who use a universal default password (like "admin/admin"), Fujitsu takes a variable approach depending on the server model and the generation of the hardware.
Before diving into passwords, understanding the iRMC’s role is crucial. Fujitsu iRMC is comparable to Dell’s iDRAC (Integrated Dell Remote Access Controller) or HP’s iLO (Integrated Lights-Out). It is a specialized microcontroller on the server’s motherboard, running its own operating system, network stack, and web server.
Key iRMC versions you will encounter:
Each generation may have different default behaviors, but the credentials have remained surprisingly consistent over time. fujitsu irmc default password
Q: Does every Fujitsu server model have the same default password?
A: Yes, almost all Fujitsu PRIMERGY servers (RX, TX, CX, BX series) use admin / admin. No model-specific differences are known.
Q: Can I recover the iRMC password without physical access? A: Not if the default has been changed and you don’t have another admin account. Physical access (or remote KVM if already configured) is required to clear the settings.
Q: Is there a backdoor or master password for Fujitsu iRMC? A: No. Urban legend aside, Fujitsu has no public backdoor. If you lose the password, follow the recovery steps in Part 6.
Q: My iRMC login says "Account locked". What now? A: iRMC locks an account after 3–5 failed attempts for 15 minutes. Wait or reset via physical jumper.
Q: Does iRMC S5 still use admin/admin?
A: Yes, as of 2025 firmware releases, the factory default remains admin / admin. Fujitsu relies on administrators to change it during deployment. Some iRMC versions allow you to load a
On older Fujitsu PRIMERGY servers, the iRMC often ships with a static, universal default password.
Almost all Fujitsu PRIMERGY servers have a maintenance or clear CMOS jumper that also resets iRMC to factory defaults.
Steps:
Tell me the exact Fujitsu server model (or iRMC version printed in the firmware/label) and whether you have physical access; I will provide the precise manual link and the factory-reset procedure for that model.
The default credentials for a Fujitsu Integrated Remote Management Controller (iRMC) depend on the hardware generation of your server. Historically, Fujitsu used a universal default, but newer models (starting with ) use unique, per-device passwords for improved security Fujitsu Global Default Credentials by iRMC Generation Note: Both fields are case-sensitive. (e.g., PRIMERGY M7 series) Unique per server . You can find this password printed on the physical System ID card Place it in the root of the USB,
(pull-out tab) located on the front of the server or on a label attached to the top cover. The password often follows the format Admin-XXXXXXX
and the entire string (including the prefix) must be entered. Fujitsu Global How to Find or Reset the Password Check the System ID Card:
systems, pull out the small plastic tab on the front panel. The password is listed below the barcode Use IPMITool (Local Reset):
If you have local OS access, you can reset the password without knowing the current one by using the following command in a terminal: ipmitool user set password 2 'NewPassword123!' Physical Jumper:
Older PRIMERGY motherboards often have a "password clear" or "reset" jumper near the SATA ports that can clear BIOS and management passwords. Refer to your specific model's Maintenance Manual for the exact location. Fujitsu Global IPMITool command for a different operating system, such as VMware ESXi AI responses may include mistakes. Learn more