Finding a working firstchip fc1179 firmware link is half the battle. The other half is patience and careful execution. Unlike expensive commercial tools that charge $50 for a one-time fix, the resources above are free, community-tested, and effective for 90% of FC1179 failures.
Remember: Always match the firmware to your NAND flash ID, run as administrator, and never interrupt a flash session. With the correct firmware and UMPTool, even a seemingly dead USB drive can rise from the grave.
Final firstchip fc1179 firmware link (primary):
🔗 https://www.usbdev.ru/files/firstchip/firstchip-fc1179/
Backup mirror:
🔗 https://github.com/USB-Tools/FirstChip-FC1179/releases (Unofficial GitHub mirror)
If this guide saved your data, consider sharing it on forums like Reddit, Tom’s Hardware, or BleepingComputer. Your upvote might help another user avoid paying for a $200 data recovery service.
Disclaimer: The author is not responsible for any damage to hardware or loss of data. Proceed at your own risk. Always verify downloaded files with antivirus software.
Finding the correct firmware for the FirstChip FC1179 controller requires specific "Mass Production Tools" (MPTools) rather than a single firmware file. These tools are used to repair corrupted USB drives, fix "No Media" errors, or restore factory capacity. 🛠️ Recommended Download Sources
Because FirstChip does not have a dedicated English consumer website, the most reliable downloads are hosted on technical community repositories: USBDev.ru (Highly Recommended): This is the primary archive for FirstChip tools. FirstChip FC1179 MPTools Archive Google Drive Community Mirrors: Technical users often share specific stable versions like FirstChip FC1178/FC1179 MPTools V1.0.4.6 🔍 Preparation Steps
Before downloading, you must verify that your controller is definitely an FC1179 to avoid "bricking" the device. Download ChipGenius: Use this tool to read the internal hardware ID. Verify Controller: "Controller Vendor: FirstChip" "Controller Part-Number: FC1179" Note Flash ID: The MPTool will need this ID (e.g., AD3A14030850 ) to select the correct firmware parameters. ⚡ How to Flash the Firmware Once you have the MPTool, follow these general steps: Extract the ZIP: Run the executable (usually FirstChip_MpTool.exe Plug in USB: The tool should detect your drive automatically. "Settings" (Password is usually blank or Ensure the matches what you found in ChipGenius.
button. The process typically takes 1–10 minutes depending on the NAND health. Completion:
A green bar or "OK" status indicates success. Re-plug the drive to use it. firstchip fc1179 firmware link
Using the wrong MPTool version or incorrect settings can permanently damage your USB hardware. Always try to match the version of the tool to the manufacturing date of your drive if possible. To help you find the version you need, could you tell me: What is the specific error
you are seeing? (e.g., "Write Protected", "No Media", or "0 MB") What is the reported by ChipGenius? Do you need this for data recovery or just to make the drive work again ? (MPTools will erase all data).
View topic - HP 64GB flash drive with the FirstChip Controller. 13 Jun 2021 —
The FirstChip FC1179 firmware is typically bundled within "MpTools" (Mass Production Tools) used to repair or reflash USB drives. You can download these utility packages from major community archives like FlashBoot.ru or the FirstChip FC1179 section on USBDev.ru. Recommended Download Links
These repositories host various versions based on the specific NAND flash and release date:
USBDev.ru Repository: Offers the latest stable versions, including V1.0.7.2 released in early 2024.
FlashBoot.ru Archive: A secondary source for older and alternative builds if newer versions fail to recognize your chip. Usage Tips
Identify Your Chip: Use a tool like ChipGenius to confirm your controller is exactly the FC1179 before flashing.
Change Language: Most tools open in Chinese by default. Look for a Language dropdown or radio button on the side panel to switch to English.
Default Password: If the "Settings" menu asks for a password, try leaving it blank, or use 123456 or FCMP. Finding a working firstchip fc1179 firmware link is
Admin Rights: Always run FCMpTools.exe as an Administrator to ensure it can access the USB hardware properly.
Need help with specific settings for your flash drive, like fixing a "No Media" error or restoring capacity?
The FirstChip FC1179 Go to product viewer dialog for this item.
is a popular controller used in low-cost and promotional USB flash drives. Finding the correct firmware and mass production (MP) tools is essential for repairing "Read Only" errors, fixing corrupted partitions, or restoring drives that aren't recognized by Windows. Common Firmware & MP Tools
Because FirstChip frequently updates its software to support new NAND flash types, you should use a version of the FirstChip MpTools (Mass Production Tools) that matches or exceeds your chip's manufacturing date.
FirstChip MpTools V1.0.5.2: A stable version often used for standard FC1179 recovery.
FirstChip MpTools (2022/2023 Versions): Recommended if your drive was purchased recently, as it includes updated firmware for newer 3D NAND.
iFlash.ru / FlashBoot.ru: These are the most reliable community databases for downloading these tools. You can search for "FC1179" on FlashBoot.ru to find the specific version you need. How to Identify Your Controller
Before downloading, verify your chip is indeed an FC1179. Use a hardware identification tool like ChipGenius or Flash Drive Information Extractor. These tools will provide: Controller Vendor: FirstChip Controller Part-Number: FC1179
Flash ID: Needed to ensure the firmware supports your specific memory chip. Steps to Reflash Firmware Disclaimer: The author is not responsible for any
Download and Extract: Get the latest FirstChip MpTools and extract the ZIP file. Run as Administrator: Open FirstChip_MpTool.exe.
Insert Drive: Plug in your USB flash drive. If the tool doesn't see it, you may need to enter "Test Mode" by shorting the pins on the NAND chip (only for advanced users).
Settings: Most tools work with "Auto" settings, but you can click Settings (usually no password required) to adjust the disk capacity or name.
Start/Start All: Click the Start button. The process usually takes 2–10 minutes depending on the flash memory's health and size. Important Warnings
Data Loss: Using these tools will permanently erase all data on the USB drive.
Brick Risk: Using the wrong firmware version can make the drive completely unresponsive. Always try to match the "Flash ID" provided by ChipGenius with the supported list in the MpTool readme or configuration.
In the settings window, do the following:
There is no single firmware file for the FC1179. Unlike a motherboard BIOS update, which is standardized for a specific model, FC1179 firmware is dynamically generated. The firmware depends entirely on:
Therefore, downloading a random .bin or .fw file labeled "FC1179" and flashing it to your drive will almost certainly result in a non-functional drive unless your NAND flash memory is an exact match to the one the firmware was compiled for.
Unzip FC1179_Firmware_Pack_2025.zip. Inside you will find:
/umpTool/
- UMPToolV7200.exe
- setting.ini
- /firmware/
- FC1179_7THL_8GB.bin
- FC1179_15TLC_16GB.bin
- ... etc.