Even with the patched version, you may encounter errors. Here is how to solve them:
| Error Message | Solution in Patched 2022 Version |
| :--- | :--- |
| "Cannot find DBF file" | Open Setting.set in Notepad. Change CheckDBF=1 to CheckDBF=0. |
| "Chip mismatch" | In the "Force Flash" tab, manually select FC1178BC_Ultra_2022.set (patched list). |
| "Read ID fail" | Your drive is in low power mode. Use a powered USB hub. |
| "Download ISP fail" | The NAND is too slow. Switch to USB 2.0 port and retry. |
If Windows doesn't see the drive at all, you must short the NAND pins.
You plug in your USB flash drive. The computer dings. You hear the familiar sound of hardware connecting. But then... nothing appears in "This PC." Or worse, the drive shows up as 0 bytes, tells you to insert a disk, or reports an "Undefined Error." firstchip fc1178bc mptools 2022 patched
If you are reading this, you have likely identified that your flash drive is powered by the FirstChip FC1178BC controller. This controller is common in budget-friendly and promotional USB 2.0 and 3.0 drives from brands like PNY, ADATA (some models), and generic Chinese manufacturers.
The solution to your problem is a piece of software called MPTools (Mass Production Tools). However, the standard tools often fail with a dreaded Check DBF file mismatch or INI file error. This is where the FC1178BC MPTools 2022 Patched version enters the scene.
Click the "Start" button (Play icon). Watch the log window. You will see: Even with the patched version, you may encounter errors
If you see "FAIL" at any point, close the tool, unplug the drive, wait 10 seconds, plug it back in, and click Start again. The patched tool often succeeds on the second attempt due to timing changes.
The mention of a "2022 patched" version suggests that there was an update to the MPTools software released in 2022. This update likely included fixes for bugs or security vulnerabilities found in previous versions, improvements to the user interface or functionality, and possibly support for new hardware.
Search for FC1178BC_MPTools_v1.0.3.8_Patched_2022 from reputable flash drive forums (USBDev.ru or the "Bad Block Recovery" thread on Reddit's r/datarecovery). Verify the SHA-1 hash if available. Avoid EXE files from unknown YouTubers; stick to ZIP archives containing the MPTool.exe. If you see "FAIL" at any point, close
The FirstChip FC1178BC MPTools 2022 Patched exists in a legal gray area. It is proprietary code released without authorization. However, in the world of hardware repair, it is considered abandonware because FirstChip no longer supports these older USB 2.0 controllers.
When should you NOT use it?
When should you use it?
When Windows keeps saying "Please insert disk into drive" despite a drive being physically present. When all consumer tools (EaseUS, AOMEI, Diskpart) fail. When you have a drawer full of 16GB and 32GB drives that died after one too many unsafe removals.
In MPTool, press the magnifying glass (Refresh) icon. If the tool sees your FC1178BC, it will appear in the first slot with a green or blue circle. It will likely show:
If nothing appears: Short the two test points on the PCB (see Part 5 below).