Do not download blindly.
Open the box → note PCB version + WiFi chip → search exactly that combination.
If you can’t find it, dump your current firmware via dd (if still booting) to create your own stock ROM backup first.
Would you like help identifying your board from photos or via adb commands before downloading anything?
Downloading and installing Android 7.1 stock firmware for an MXQ Pro 4K TV Box
requires first identifying the specific chipset and board version of your device. MXQ Pro 4K boxes
are often produced with different hardware (e.g., Amlogic, Rockchip, or Allwinner), and flashing the wrong firmware can permanently "brick" the device. Step 1: Identify Your Chipset
Before downloading any files, you must know which processor your box uses. You can find this in Settings > About or by using an app like AIDA64.
Amlogic S905/S905W/S905X: Commonly found in older or "Pro" versions. Rockchip RK3229/RK3228A: Frequently used in "4K" or "5G" labeled boxes.
Allwinner H3: Found in specific variants, often labeled as " MXQ Pro 4K 5G Step 2: Firmware Download Sources
Once you have identified your chipset, you can find the corresponding Android 7.1 (Nougat) firmware on reputable community and archive sites:
Downloading and installing Android 7.1 stock firmware for an MXQ Pro 4K TV box Go to product viewer dialog for this item.
requires identifying your specific hardware first, as these boxes use different processors (Amlogic S905W vs. Rockchip RK3229) that are not compatible with each other's firmware. Step 1: Identify Your Hardware
Before downloading, you must confirm your box's chipset and board version to avoid "bricking" the device.
Chipset Check: Use apps like CPU-Z or AIDA64 from the Play Store to see if your processor is an Amlogic S905 Go to product viewer dialog for this item. series or a Rockchip RK322x .
Board Version: Open the box (usually 4 screws under the rubber feet) and look for a code printed on the green PCB (e.g., R329Q_V3.1 or MXQ_S905W_V1.0). Step 2: Download Links for Android 7.1
Official and community-hosted firmware repositories provide different versions based on the internal SoC: Firmware Version Download Source Amlogic S905W Go to product viewer dialog for this item. Android 7.1.2 (Stock) China Gadgets Reviews Amlogic S905W Android 7.1 (PC/SD) AndroidTV Box Firmware Rockchip RK3229 Go to product viewer dialog for this item. Android 7.1 (Nougat) Freaktab Forums Rockchip RK3229 Android 7.1 (Custom) Google Drive (via BlogIncome) Step 3: Flashing Tools
You will need specific software to "burn" the firmware onto the TV box:
You cannot flash via SD card easily with Android 7.1. You need a PC (Windows 7/10/11) and the USB Burning Tool.
Download these before you start:
Search for "MXQ Pro 4k Android 7.1.2 img." Many dead links from 2018 are archived here.
Some users look for an OTA update.zip to update without a PC. While possible, this is not recommended if your box is bricked or unstable. OTA files only work on a functioning system and require the exact same build fingerprint. For a true “stock” restoration, always use the full .img via USB Burning Tool.
The manufacturer hosts files on PanBaido (hard to navigate) or dedicated support pages. Use the Amlogic USB Burning Tool supported downloads.
There are two ways to install the firmware. We recommend the USB Burning Tool method as it is safer and works even if the box won't boot fully.
Warning: There is no single universal file. The keyword "download android 7.1 stock firmware for mxq pro 4k tv box" is tricky because your box might have one of four different Wi-Fi chips.
Before downloading, you must identify your board. Open your MXQ Pro 4K case (pop the lid off gently) and look at the green circuit board. You will see a label like:
Then, identify the Wi-Fi chip:
If you flash the wrong file, your Wi-Fi and remote will not work.