Digi Edgeport 1 Driver Windows 10 64 Bit -

After the installation and system reboot, you need to confirm Windows recognizes the device as a COM port.

Using Digi’s RealPort or PortVision DX tool (downloadable from Digi's website), you can:

The same Digi Edgeport/1 driver for Windows 10 64-bit (v7.0.0.2) works flawlessly on Windows 11 64-bit as well. Digi has confirmed that no further changes are planned, and the driver is included in Microsoft’s HCK (Hardware Compatibility Kit).

If you are deploying a large number of Edgeport devices, consider using Digi’s PortVision DX software for remote management, driver updates, and device discovery across your network.

Crucial Warning: Avoid third-party "driver updater" websites. They often bundle malware or supply generic drivers that will BSOD (Blue Screen of Death) your Windows 10 64-bit system.

The Digi EdgePort 1 is a single-port serial device server/adapter that requires a vendor driver to create a virtual COM port on Windows. For Windows 10 64-bit, follow this concise guidance to get it working and stable.

Digi provides a setup executable that handles everything automatically.

The Digi Edgeport 1 remains a reliable tool for bridging legacy serial equipment with modern computing environments. While the transition to Windows 10 64-bit initially caused chaos for many users, Digi International has risen to the challenge by providing WHQL-signed, production-grade drivers that are simple to install.

To recap the critical steps:

If you encounter persistent issues, check Device Manager for USB resource conflicts, disable legacy USB support in your BIOS, or reach out to Digi’s technical support – they still provide assistance for these time-tested devices.

Your Digi Edgeport/1 has years of service left. With the correct Windows 10 64-bit driver, it will continue to be the most dependable USB-to-serial solution on your workbench, production line, or data center console.

Resources:

Last updated: 2025. Information applies to Windows 10 64-bit (versions 1607 to 22H2) and Windows 11.

For those working in industrial automation, medical tech, or classic server maintenance, the Digi Edgeport/1 Go to product viewer dialog for this item.

is often the only thing standing between you and a non-functional piece of critical equipment. Despite being a "legacy" device, it remains a gold standard for reliable USB-to-serial conversion.

If you are trying to get this workhorse running on a modern Windows 10 64-bit system, here is what you need to know to avoid the dreaded "Unknown Device" error. 🔌 Why It Still Matters While cheap adapters are everywhere, the Edgeport/1 Go to product viewer dialog for this item.

is built for mission-critical applications like point-of-sale systems, ATMs, and emergency vehicles. Its drivers are famous for their deep configurability—allowing you to emulate hardware serial ports in ways that "plug-and-play" consumer cables simply can’t. 🛠️ The Installation Blueprint

To ensure a smooth setup on Windows 10 64-bit, follow this specific order of operations:

For the Digi Edgeport/1 on Windows 10 (64-bit), the most reliable driver is version 6.05, which is officially supported for modern Windows environments. 📥 Official Download & Setup

While Digi has marked some Edgeport lines as legacy, drivers remain available through their Support Resources.

Download: Get the 40002537_N.exe (v6.05) package from the Digi Knowledge Base.

Permissions: You must have Administrator rights to run the installer. Sequence: Disconnect the Edgeport device first. Run the installer and wait for the command window to close.

Plug the device into a USB port to trigger automatic finalization. 🛠️ Key Configuration Utility

Once installed, Windows doesn't always show a shortcut immediately. You must have the device connected for the full utility to appear.

Location: Find the Edgeport Configuration Utility under the "Digi USB" folder in the Start Menu.

Direct File: On 64-bit systems, the executable is edgeport64.exe located in the \system32\ folder.

Verification: Open the utility to see your device under the "General" tab and confirm COM port assignments. 💡 Troubleshooting & Indicators Status Light: Blinking Red: Establishing communication or driver issue. Solid Green: Device is ready and operating normally. Amber: Active serial port data transfer.

Legacy Drivers: If v6.05 fails, older versions like v5.10 (revision G) are available for specific legacy hardware revisions, though v6.05 is generally backward compatible.

Firmware: The Edgeport firmware usually updates automatically when connected to a system with the latest drivers.

🌟 Pro Tip: If Windows 10 fails to recognize the device, manually right-click the installer and select "Run as Administrator" to ensure all registry keys are created properly.

If you tell me what specific error you're seeing (e.g., Code 10, "Device not recognized") or the hardware part number, I can give you more targeted help.

How to install the Edgeport driver in Windows - Digi International

The official driver for the Digi Edgeport 1 on Windows 10 (64-bit) is the v6.05 Edgeport Driver Digi International 🛠️ Quick Installation Guide To ensure a clean setup, follow this specific sequence: Unplug the Device : Do not plug the Edgeport into your USB port yet. Download & Run latest v6.05 driver from the official Digi Support site Admin Rights : Right-click the file and select Run as Administrator Wait for Finish

: A black command window will appear; wait for it to close on its own. Connect Hardware

: Once the installer finishes, plug the Edgeport into your computer's USB port. Digi International 🔍 How to Verify and Manage

After installation, you can confirm the device is working using the Edgeport Configuration Utility Start Menu Launch the Edgeport Configuration Utility

tab; your device should be listed with its assigned COM port. Digi International 💡 Troubleshooting Tips Legacy Hardware

: If you have an older "Legacy" Edgeport, you may need version , which is also compatible with Windows 10. Direct Connection

: For best results, plug the device directly into a PC port rather than a USB hub. LED Indicators : A slow-blinking means the device is installed and ready for use. Digi International If you run into issues, let me know: Does your device have a specific part number (e.g., 301-1001-11)? Industrial (MEI) model or the standard commercial version? Are you seeing a specific error code in Device Manager?

How to install the Edgeport driver in Windows - Digi International

To install the Digi Edgeport/1 Windows 10 64-bit , you should use the latest driver package (typically version 6.x) available from the official Digi Support Resources Digi International Installation Steps : Obtain the latest Windows driver from the Digi International support page Pre-Installation

: Disconnect the Edgeport/1 from your PC before starting the installation. Run Installer : Execute the downloaded file (e.g., a self-extracting ). It typically extracts files to C:\edgeport drivers and launches a command-prompt setup. Connect Device digi edgeport 1 driver windows 10 64 bit

: Plug the Edgeport/1 into a USB port after the driver installation is complete. Windows should then automatically detect the device and assign COM ports. : Open the Edgeport Configuration Utility

(located in the "Digi USB" program group) to confirm the device is listed and serial ports are active. Digi International Key Specifications & Troubleshooting Digi Edgeport USB-to-Serial Converters Support Resources

Contact Information. 1-877-912-3444 952-912-3444 Contact Digi sales. Digi International

How to install the Edgeport driver in Windows - Digi International

Finding the right driver for the Digi Edgeport/1 USB-to-serial converter on a 64-bit Windows 10 system can be tricky since these devices are legacy hardware. However, Digi provides a universal driver package that supports most Edgeport models on modern operating systems. Direct Driver Download

The most reliable driver for Windows 10 (64-bit) is the Digi Edgeport Windows Driver v4.90 (or latest). Official Source: Digi Support Downloads Architecture: Supports both x86 and x64 (64-bit). Compatibility: Validated for Windows 7 through Windows 11. Installation Steps

Follow these steps to ensure the hardware is recognized correctly:

Disconnect the device: Unplug the Edgeport/1 from your USB port.

Download the installer: Grab the .exe driver package from the Digi site.

Run as Administrator: Right-click the installer and select Run as Administrator.

Follow the wizard: Complete the installation and restart your PC if prompted.

Connect the Edgeport: Plug the device into a USB 2.0 or 3.0 port. Verify in Device Manager: Right-click the Start button > Device Manager. Look under Ports (COM & LPT) for "Digi Edgeport/1 (COMx)". Troubleshooting Common Issues 📍 Signed Driver Requirements

Windows 10 64-bit strictly enforces driver signing. If the driver fails to install, ensure you are using v4.80 or higher, as older versions may not have the required digital signatures for 64-bit environments. 📍 Port Assignment

If your software requires a specific COM port (e.g., COM1 or COM2): In Device Manager, right-click the Edgeport/1. Go to Properties > Port Settings > Advanced. Change the COM Port Number from the dropdown menu. 📍 Hub Power Issues

The Edgeport/1 is bus-powered. If it doesn't appear in Device Manager: Avoid using unpowered USB hubs.

Plug the device directly into the computer's motherboard ports (the ones on the back of a desktop). Legacy "Edgeport Utility"

The driver package usually includes the Edgeport Configuration Utility. This tool is helpful for: Testing the serial signals. Viewing the internal firmware version. Updating firmware to match the new driver.

💡 Quick Tip: If Windows Update tries to "fix" your driver with a generic one, it may break functionality. Stick to the official Digi package for industrial reliability. If you're still having trouble, let me know: Does the device show up as an "Unknown Device"? Are you using a USB 3.0 (blue) or USB 2.0 port? What software are you trying to connect to the serial port?

To use the Digi Edgeport/1 USB-to-serial converter on Windows 10 64-bit, you must install the latest version 6.05 of the Digi Edgeport driver. This driver is fully compatible with modern 64-bit systems and includes the essential Edgeport Configuration Utility for managing COM ports. Driver Specifications

The following details ensure you are downloading the correct software for your hardware: Version: 6.05 (Revision N) Release Date: August 4, 2021

Supported OS: Windows 10 (64-bit & 32-bit), Windows 11, and Windows Server (2012–2019) Hardware ID: USB/VID_1608&PID_0240 File Name: 40002537_6.05_N.exe How to Install the Driver

To ensure a successful installation, Digi recommends unplugging the Edgeport device before starting the software setup.

Download: Obtain the latest Edgeport driver from the official Digi International Support site.

Run as Administrator: Right-click the downloaded .exe file and select Run as Administrator.

Execute Setup: Click the "Setup" button. A black command window will appear briefly while the drivers are registered in the system.

Connect Device: Once the installation window disappears, plug the Edgeport/1 into a USB port. Windows 10 will now automatically detect the hardware and assign it a COM port.

Verify: Open the Edgeport Configuration Utility from the Start Menu (under "Digi USB") to confirm the device is listed and active. Troubleshooting and Best Practices

How to install the Edgeport driver in Windows - Digi International

Introduction

The Digi Edgeport/1 is a USB-to-serial adapter that allows you to connect a serial device to a computer via a USB port. The device is commonly used for industrial automation, medical devices, and other applications that require a serial connection. To use the Edgeport/1 on a Windows 10 64-bit system, you need to install the correct driver.

Downloading the Driver

To download the Digi Edgeport/1 driver for Windows 10 64-bit, follow these steps:

The driver file should be named "edgeport.inf" or "digi-edgeport.inf".

Installing the Driver

To install the Digi Edgeport/1 driver on Windows 10 64-bit, follow these steps:

Verifying the Driver Installation

To verify that the driver has been installed correctly, follow these steps:

Troubleshooting

If you encounter issues during driver installation or the device is not functioning as expected, try the following troubleshooting steps:

Common Issues and Solutions

Here are some common issues and their solutions: After the installation and system reboot, you need

Conclusion

Installing the Digi Edgeport/1 driver on Windows 10 64-bit requires careful attention to detail. By following the steps outlined in this guide, you should be able to successfully install the driver and use the device with your computer. If you encounter any issues, refer to the troubleshooting section or contact Digi International support for further assistance.

Additional Resources

Here’s a clear, helpful post you can use on a forum, blog, or internal IT knowledge base.

Title: SOLVED: Digi Edgeport/1 Driver for Windows 10 64-bit

Post:

If you need to get a Digi Edgeport/1 (or Edgeport/2, Edgeport/4, etc.) working on Windows 10 64-bit, here’s what actually works as of 2025–2026.

Official working driver:
Digi’s Edgeport Driver v8.0.2 (or newer) includes native Windows 10 64-bit support.

Direct steps:

Troubleshooting if it doesn’t work:

Still on an old driver?
Do not use Windows Update’s generic driver. Digi’s v8.0.2 is the stable, signed version for Win10 64-bit.

Let me know if you have an Edgeport/1, /2, /4, or /8 – same driver works for all.

You're looking for information on the Digitech Edgeport 1 driver for Windows 10 64-bit. Here's what I could put together:

Overview

The Digitech Edgeport 1 is a USB MIDI interface designed for musicians and music producers. It allows for connecting multiple MIDI devices to a computer via a single USB connection. The device is manufactured by Digitech, a well-known brand in the music industry.

Driver Information

To use the Edgeport 1 with Windows 10 64-bit, you'll need to install the correct driver. The driver enables the operating system to recognize the device and communicate with it properly.

Downloading and Installing the Driver

Here are the steps to download and install the Digitech Edgeport 1 driver for Windows 10 64-bit:

Alternative Driver Sources

If you're unable to find the driver on the manufacturer's website, you can try searching for it on other websites that specialize in driver downloads, such as:

Troubleshooting

If you encounter issues during driver installation or the device doesn't work as expected, try:

Conclusion

The Digitech Edgeport 1 is a useful tool for musicians and music producers who need to connect multiple MIDI devices to their computer. By following the steps outlined above, you should be able to find and install the correct driver for Windows 10 64-bit. If you encounter any issues, try troubleshooting steps or reach out to the manufacturer's support team for further assistance.

The Digi Edgeport/1 remains a robust solution for adding high-speed serial connectivity to modern systems via USB. While many legacy hardware components struggle with modern operating systems, the Edgeport/1

is fully compatible with Windows 10 64-bit using the latest drivers from Digi International. Essential Driver Information

To ensure stable operation on a 64-bit architecture, you must use the correct driver version. The most current and widely recommended version for Windows 10 is v6.05. Driver Version: 6.05 (latest)

Filename: 40002537_6.05_N.exe (or similar depending on the exact sub-version) Developer: Digi International Official Support Step-by-Step Installation Guide

Installing the Edgeport driver requires a specific sequence to avoid hardware recognition errors. 1. Preparation Disconnect the Device: Do NOT plug the Go to product viewer dialog for this item. into your USB port before the software is installed.

Administrator Rights: Ensure you are logged in with administrative privileges. 2. Installation Process

Download: Get the v6.05 driver from the Digi Edgeport Support Page.

Run Installer: Right-click the downloaded .exe file and select Run as Administrator. Setup:

Click the Setup button. A black command-line window will appear while the drivers are registered; wait for it to close automatically. Connect Hardware: Once the installer finishes, plug the Edgeport/1

into an available USB port. Windows will now automatically detect the device and assign a COM port. 3. Verification To confirm the installation was successful:

Open the Start Menu and navigate to the Digi USB program group. Launch the Edgeport Configuration Utility Edgeport/1

should appear under the General tab with its assigned COM port listed. Optimizing for Windows 10 64-bit

How to install the Edgeport driver in Windows | Digi International

The latest official driver for the Digi Edgeport/1 on Windows 10 (64-bit) is version 6.05. While the Edgeport line is officially designated as "end of life" by Digi International, this driver package remains compatible with modern 64-bit Windows environments. Download and Installation Steps

Follow this specific sequence to ensure the driver installs correctly without hardware conflicts: If you see this entry without a yellow

Disconnect the Device: Do NOT have the Edgeport plugged into your computer when you start the installation.

Download Driver: Obtain the official Digi Edgeport driver v6.05 (often listed as file 40002537_6.05_N.exe).

Run as Administrator: Right-click the downloaded .exe file and select Run as Administrator.

Complete the Setup: Click the Setup button. A black command window will appear during the process; wait for it to disappear completely.

Connect Hardware: Plug the Edgeport/1 into a USB port. Windows should now automatically detect the hardware and finish the final installation steps. Verification and Configuration

To confirm your device is working properly, use the built-in utility included with the driver:

Locate Utility: Go to Start > All Apps > Digi USB > Edgeport Configuration Utility.

Check Status: Your Edgeport/1 should appear under the General tab. Expanding the entry will show the assigned COM port.

Firmware: Connecting the device to a computer with this driver installed will automatically update its firmware if needed. Troubleshooting Tips

Driver Signing: If the installation fails due to security restrictions, you may need to temporarily disable driver signature enforcement in Windows settings.

COM Port Changes: Use the Edgeport Configuration Utility to manually reassign COM port numbers if they conflict with other hardware.

Do you need help reassigning specific COM port numbers for your serial application?

How to install the Edgeport driver in Windows - Digi International

Setting up a Digi Edgeport/1 on a modern Windows 10 64-bit system is straightforward, provided you follow the specific installation order required by Digi’s hardware. Quick Setup Guide: Digi Edgeport/1 for Windows 10 1. Download the Correct Driver

The most current driver for the Edgeport family is Version 6.05, which officially supports Windows 10 and Windows 11 (both 32-bit and 64-bit).

Official Source: You can find the latest software on the Digi Edgeport Support Page.

File to Look For: The installer is typically named 40002537_6.05_N.exe. 2. Critical Installation Steps

To avoid common "driver not found" errors, follow this exact sequence:

Unplug the Edgeport: Do NOT have the device plugged into your USB port when you start.

Run as Administrator: Right-click the downloaded .exe and select Run as Administrator.

Execute Setup: Click the Setup button. A black command window will appear briefly during the process.

Connect the Hardware: Only after the installation window disappears should you plug the Edgeport into your USB port. Windows will then automatically finish the driver binding. 3. Verifying the Connection

Once installed, you can manage your new COM port via the Edgeport Configuration Utility: Open the Start Menu and look for the Digi USB folder. Launch the Edgeport Configuration Utility.

Your device should appear under the General tab. Double-click it to see the assigned COM port number (e.g., COM3). Troubleshooting Tips LED Status: A slow blinking Green light on the Edgeport indicates it is installed correctly and idle.

Legacy Drivers: If you are using a very old "Legacy" model, you may need to check the Digi Knowledge Base for specific older revisions, though v6.05 is highly compatible with most units. USB Hubs: For the most stable connection, plug the Edgeport

directly into the computer’s USB port rather than an unpowered hub.

Need to connect multiple devices?If you're expanding beyond a single port, retailers like CDW and PCNation carry the full Edgeport line, including 4-port and 8-port industrial models.

What specific serial device are you connecting? (e.g., a GPS unit, barcode scanner, or PLC?) I can provide the exact terminal settings or pinout info if you need it.

How to install the Edgeport driver in Windows - Digi International

Digi Edgeport/1 is a high-performance USB-to-serial converter that provides instant COM port expansion for Windows 10 (64-bit) systems

. This "bump-in-the-cable" solution is frequently used in mission-critical enterprise environments like retail stations and emergency vehicles. Digi International Driver Installation for Windows 10 (64-bit)

The current supported driver version for modern Windows operating systems is Digi International Preparation device into your computer before starting the installation : Obtain the Windows driver package from the Digi Edgeport Support Page : Right-click the downloaded executable (e.g., 40002537_6.05_N.exe ) and select Run as Administrator : Click the

button. A black command window will briefly appear as drivers are loaded. Connection : Once the installation window disappears, plug the Edgeport/1

into a USB port. Windows will automatically finish the device installation Digi International Verifying Successful Installation After connecting the device, use the Edgeport Configuration Utility to ensure it is working correctly: Locate Utility Edgeport Configuration Utility Confirm Connection : The device should appear under the

tab. Double-clicking the entry will list the assigned serial (COM) ports. LED Status

: In normal idle operation, the System Status LED on the device should blink slow green Digi International Troubleshooting and Legacy Support Permissions

: Administrative rights are required for a successful installation. Direct Connection : For best results, connect the

directly to the computer's USB port rather than through a non-powered hub or extension cable Legacy Drivers

: If you have an older "Legacy" Edgeport model, you may need specific older driver versions (like v5.70), which are still available as a courtesy on the Digi Knowledge Base has been assigned to your Edgeport/1 in Device Manager?

How to install the Edgeport driver in Windows - Digi International

The Digi Edgeport 1 is a legacy USB-to-serial converter often used in industrial and commercial environments. Because the hardware is older, finding the correct driver for modern Windows 10 systems can be tricky.

This guide covers the correct driver source and the installation process.