Chevron Digital Timer Ew-32 User Manual
The Chevron EW-32 is a digital 24-hour/7-day programmable timer with a grounded outlet (3-prong). Unlike older mechanical timers that use pins and dials, the EW-32 uses a battery-backed digital interface, allowing it to keep accurate time even during a power outage.
Key Specifications:
Yes – for basic programming (setting clock + one ON/OFF event).
No – for advanced use (multiple programs, random mode, troubleshooting).
If you rely strictly on the printed manual, you’ll succeed at simple tasks but likely get confused about:
Locate your EW-32. You will see:
Q: Why does my EW-32 turn on at 3:00 AM when I set it for 3:00 PM?
A: You likely set the ON time with the wrong AM/PM indicator. Reprogram the event carefully watching the small “AM” or “PM” icon on the left of the screen.
Q: Can I use this for a pool pump?
A: Yes, if the pump is 115V and draws less than 15A. However, keep the timer dry—install a weatherproof cover.
Q: The manual override (+ button) doesn't work. Why?
A: The switch must be in Auto mode. If it’s in Off or On, the +/– buttons are disabled.
Q: Does the clock automatically adjust for Daylight Saving Time?
A: No. You must manually adjust the hour using the CLOCK button twice a year.
Q: I lost the manual and my battery died. Are my programs saved?
A: No. The CR2032 only preserves the clock, not the 8 programs during a power outage. You must reprogram after a long power loss.
If the timer behaves erratically or you want to erase all 8 programs: chevron digital timer ew-32 user manual
This product comes with a standard warranty against manufacturing defects. Please retain your proof of purchase. The warranty does not cover damage caused by misuse, overload, or wear and tear.
If you’ve ever found yourself staring at a Chevron Digital Timer (EW-32) and wondering if you need a PhD in engineering to turn a lamp on, you aren't alone. This compact device is a powerhouse for home automation, but its manual can be a bit elusive.
Here is a quick-start guide to mastering the EW-32 without the headache. The "First-Time" Checklist
Charge it up: Before you do anything, plug the timer into a wall outlet for 12 hours. This charges the internal battery so it can keep your settings even during a power outage.
The Hard Reset: Use a paperclip or pin to press the "R" (Reset) button. This clears any old, ghost programs from the factory. Setting the Clock
Hold the SET button for 3 seconds until the display flashes.
Use the + and - buttons to cycle through the Day, then Hour, then Minute. Press SET after each selection to confirm. Programming Your Schedule The EW-32 allows for up to 10–20 unique on/off cycles.
Press the + button once to enter "Program Mode" (you’ll see "P1 ON" on the screen).
Hit SET, then use + / - to pick which days you want it to run (e.g., just weekdays, weekends, or every day). Set your ON time, press SET, then repeat for the OFF time.
Crucial Step: When you're done, make sure the mode is set to AUTO. If it says "ON," your lights will stay on forever; if "OFF," they’ll never trigger. Cool Features You Might Miss The Chevron EW-32 is a digital 24-hour/7-day programmable
Random Mode (RND): Perfect for vacations. It staggers your "on" times by 2–32 minutes so it doesn't look like a computer is controlling your house.
Countdown (CDT): Use the - button to access a simple timer that turns off your device after a set period—great for slow-cookers or hair straighteners.
Pro Tip: If your screen ever goes blank, it likely just needs a quick 10-minute "top-up" charge in the wall to wake the LCD back up.
Are you setting this up for security while you're away, or just to make sure your morning coffee is ready before you are? Chevron Digital Timer Ew 32 Zip - Facebook
The Chevron EW-32 is a 7-day digital programmable timer used to automate home appliances. To set it up, you'll primarily use the SET, UP, DOWN, and RESET buttons. Initial Setup & Reset
Charge the Battery: If the screen is blank, plug the timer into a power outlet for about 14 hours to charge its internal memory backup battery.
Reset: Use a pointed object like a pen to press the RESET (R) button. This clears all existing settings and returns the timer to factory defaults. Setting the Current Time and Day
Press the UP or DOWN button until "CLOCK" appears on the LCD.
Hold the SET button for at least 2 seconds until "SET" and the "HOUR" begin flashing.
Use UP or DOWN to adjust the current HOUR (ensure AM/PM is correct). Yes – for basic programming (setting clock +
Press SET once to switch to MINUTES, then use UP or DOWN to adjust.
Press SET again to adjust the DAY OF THE WEEK (MO, TU, WE, etc.). Press SET one last time to save the current time settings. Programming On/Off Schedules Each program requires an "ON" time and an "OFF" time: Press the UP or DOWN button until "1 ON" is displayed.
Press SET to begin programming the first activation time. The day/hour/minutes will flash.
Use UP/DOWN and SET to choose specific days (e.g., just weekdays or the full week) and the exact time you want the device to turn ON.
Press UP/DOWN until "1 OFF" is displayed, then repeat the process to set the time the device should turn OFF.
Press MANUAL to toggle the timer between ON (always on), OFF (always off), or AUTO (follows your set programs). Quick Tips
Daylight Savings Time (DST): On many similar models, pressing HOUR and MINUTE together toggles the time forward or backward by one hour.
Random Mode: Some versions include a random setting (often labeled 'RND') to turn lights on/off unpredictably for home security. Tork EWZ201 Basic Programming
The base EW-32 does not auto-adjust for DST. You must manually press SET/CLK mode and +/- to shift the clock by +1 hour in spring and -1 in fall.
Before programming, you must set the correct time. If the screen is blank or flashing, install/replace the backup battery (CR2032).
Step-by-Step:
Pro Tip: If you press the
CLOCKbutton twice quickly, you can toggle between 12-hour and 24-hour (military) mode.