Canon Service Tool V4905 2021 Download Verified May 2026
Canon Service Tool v4905 is a specialized utility primarily used by technicians and advanced users to perform maintenance on Canon Pixma printers. Most notably, it is used to resolve the 5B00 error
, which indicates that the ink absorber (or "waste ink pad") is full. Key Features and Compatibility
Version v4905 was released to support a wider range of printer models, including many G-series and MG-series units. Ink Absorber Reset : Clears the internal counter for the waste ink tank. EEPROM Maintenance
: Allows users to read and write EEPROM data or print a technical status report. Compatibility : Supports models including the G1000–G4000 series (e.g., MG2570S, MG3670), (e.g., IP2770, IP7270), and several MP, MX, and IX series Safety and Download Warning It is important to note that
Canon does not officially distribute this tool to the general public
. Most available downloads are found on third-party forums or marketplaces like AliExpress Caution is highly advised
The Canon Service Tool v4905 is a third-party software primarily used to reset the "Waste Ink Pad" counter (Error 5B00) on various Canon printer series. Review data indicates a mixed and potentially risky user experience. User Feedback Summary
User reviews for this specific version from 2021 to the present show a sharp divide in reliability:
✅ Successful Resets: Several users reported that the tool worked "right out of the box" and effectively reset their printers to working condition.
⚠️ Security Risks: At least one verified buyer on eBay reported that their download contained a Trojan Horse virus, though they were able to delete it before infection.
❌ Potential for Failure: Common issues reported by users of similar service tools include "Error 006" or the tool not responding if the printer is not in the correct "Service Mode". Compatible Printer Series
The v4905 tool is advertised to support a wide range of Canon models, including: G Series: G1000, G2000, G3000 IP Series: iP2770, iP4800, iP4900, IP7270 MG Series: MG3570, MG5270, MG5770, MG7770 MX Series: MX397, MX497, MX537 MP Series: MP230, MP280, MP287, MP490 Critical Considerations Before Using
Safety First: Because this is not an official Canon tool, downloads from unverified sites frequently carry malware. Always run a deep virus scan before opening.
Service Mode Required: The tool will only function if the printer is manually put into "Service Mode" (usually involving a specific sequence of holding the Stop and Power buttons).
Hardware vs. Software: Resetting the counter does not physically clean the ink pads. To prevent actual ink leakage, you should physically replace or wash the waste ink pads inside the printer. Reset Canon Service Tool v4905 work 100%
The Canon Service Tool v4905 is a specialized adjustment program used primarily for resetting the waste ink counter ("absorber") on many Canon PIXMA series printers. While versions from 2021 are circulating, it is critical to note that this is a professional internal tool; unverified downloads from third-party sites often carry a high risk of malware. Essential Guide to Canon Service Tool v4905 1. Prerequisites & Safety
Security Risk: Many online sources for "v4905" are flagged by antivirus software for containing Trojans. Always scan the downloaded .exe before running it.
Hardware Setup: The printer must be connected to your PC via a USB cable. It will not function over Wi-Fi.
Availability: Genuine versions are often sold for a small fee on platforms like Plati.Market or eBay, usually requiring a hardware-locked serial number to activate. 2. How to Enter Service Mode
The tool will only work if the printer is in "Service Mode". Turn off the printer but keep it plugged in. Press and hold the Resume/Cancel button (triangle icon). While holding Resume, press and hold the Power button.
Release the Resume button (while still holding Power), then press Resume 5 or 6 times (depending on your model—6 times is common for G-series).
Release the Power button. The green light should blink and then stay solid, indicating it is in Service Mode. 3. Using the Tool to Reset Ink Absorber
Once the printer is in Service Mode and connected via USB, run ST4905.exe.
Detect Printer: The tool should automatically display your printer's serial number in the header.
Clear Waste Counter: Look for the "Main" or "Clear Ink Counter" tab.
Set Absorber: Find the "Ink Absorber Counter" section, ensure "Main" is selected, and click "Set".
Verification: A message saying "A function was finished" should appear. Print an EEPROM report from the tool to verify the counter is at 0%.
Exit: Turn the printer off and then back on to return to normal operation. 4. Supported Printer Models
The v4905 version supports an extensive range of models, including: G Series: G1000, G2000, G3000, G1400, G2400, G3400, etc. IP Series: iP2700, iP2770, iP4800, iP4900, iP7200, iP7240. MG Series: MG2120, MG3500, MG3540, MG5200, MG5700, MG7700. IX Series: iX6500, iX6700, iX6800, iX7000. Pro Series: Pro 9000/9500 Mark II.
Important: If your printer’s Service Mode is already damaged (indicated by a solid orange light or failing to enter the mode), software tools will not work, and the physical EEPROM chip must be replaced or reflashed.
Do you need the specific button sequence for a different printer model like the Pro or Maxify series?
T.E.S.T.C.O.P.Y. • Просмотр темы - Canon service tool v4905
Canon Service Tool V4905 is a Windows-based utility designed for technicians to diagnose, maintain, and calibrate Canon inkjet printers. Its primary use for home users is resetting the ink absorber (waste ink) counter , typically after receiving error codes like Core Features of V4905
This version is widely used to address issues that standard drivers cannot fix: Waste Ink Counter Reset
: Clears the "ink absorber full" error that prevents the printer from operating. Hardware Diagnostics
: Runs tests on printer components to identify mechanical or sensor failures. Print Head Calibration : Performs advanced alignment and deep cleaning procedures. EEPROM Operations
: Allows authorized users to view or clear internal printer settings. Compatibility
The tool supports a broad range of PIXMA and MAXIFY models, including:
Canon PIXMA MP MP230 Inkjet Multifunction Printer - Color 6220B009
I can’t help locate or provide downloads for proprietary service tools (like Canon Service Tool V4905) or verify cracked/unauthorized software. Sharing or facilitating access to such tools may violate laws and manufacturer terms.
I can instead:
Which of those would you like?
The Canon Service Tool a specialized utility used to reset the waste ink absorber counter (errors like
) and perform EEPROM maintenance on various Canon PIXMA and G-series printers DATVIETCOMPUTER.COM ⚠️ Critical Safety Warning Canon does
officially release Service Tools to the public; they are intended for authorized service centers. Downloads found online are often bundled with malware or Trojan viruses Check the Source
: Avoid password-protected ZIP files, as encryption can bypass antivirus scans. Use a Secure Environment
: If you must use it, run it on a non-primary computer and scan with updated security software first. 1. Enter Service Mode
Your printer must be in "Service Mode" for the tool to recognize it. : Ensure the printer is off but plugged in. Hold Stop/Resume : Press and hold the Stop/Resume button (red triangle). Hold Power : While holding Stop, press and hold the Button Sequence : Release the Stop button (keep Power held), then press the (6 times for some MG/G models). Release Power
: Release the Power button. The green light should flash and then stay steady, indicating it is in Service Mode. Форум по СНПЧ
Master Guide: Canon Service Tool V4905 (2021) – Verified Download & Reset Guide canon service tool v4905 2021 download verified
If you own a Canon PIXMA printer, you’ve likely encountered the dreaded "Service Tool" error or the "Waste Ink Pad Full" notification (Error codes like 5B00 or P07). These errors effectively lock your printer, preventing any further documents from being processed.
To fix this at home without paying for a technician, you need the Canon Service Tool V4905. This 2021-verified version remains one of the most stable releases for managing internal EEPROM settings and resetting ink counters. What is Canon Service Tool V4905?
The Canon Service Tool V4905 is a specialized software utility used by technicians to perform maintenance on Canon printers. Unlike standard drivers, this tool interacts with the printer's "Service Mode" to: Reset Waste Ink Counters: Clear the "Ink Pad Full" error. EEPROM Operations: View and save internal printer data.
Print Head Cleaning: Perform deep cleaning cycles more effectively than the standard driver menu.
Model Compatibility: V4905 is widely compatible with the G-series (G1000, G2000, G3000), MG-series, and IX-series printers. How to Prepare Your Printer (Service Mode)
Before you can use the V4905 tool, your printer must be in Service Mode. If it isn't, the software will not recognize the device. Turn off the printer (but leave it plugged in). Press and hold the Stop/Reset button. While holding Stop/Reset, press and hold the Power button. Release the Stop/Reset button (keep holding Power).
Press the Stop/Reset button 5 times (for most G and MG series) or 6 times (for some newer models). Release the Power button.
The green power light should flash and then stay solid. Your printer is now in Service Mode. Canon Service Tool V4905 2021 Download (Verified)
When searching for a download, be cautious. Many sites offer "free" versions packed with malware. To ensure a verified experience:
Disable Antivirus Temporarily: Most service tools are flagged as "False Positives" because they modify hardware firmware.
Use a Dedicated PC Link: Look for reputable technician forums or verified archive mirrors that host the V4905.exe file.
Check File Size: The genuine V4905 utility is a lightweight executable, usually under 3MB. Step-by-Step: Resetting Waste Ink Pad with V4905
Once your printer is in Service Mode and the tool is downloaded:
Connect via USB: This tool will not work over Wi-Fi. Use a high-quality USB cable. Open ServiceTool.exe: Right-click and Run as Administrator.
Detect Printer: The tool should show your printer model in the top bar. Clear Waste Ink Counter: Go to the "Main" tab. Find the "Clear Waste Ink Counter" section. Ensure "Main" is selected in the dropdown. Click Set.
Wait for Confirmation: A "Function has been finished" popup will appear.
Restart: Turn the printer off, wait 10 seconds, and turn it back on normally. Common Issues & Troubleshooting
Error 006: This means the printer is not in Service Mode. Repeat the button-press sequence.
Error 002: The function is not supported by your specific printer model.
Tool Freezes: Close the program, unplug the USB, and restart the process. Ensure no other printing tasks are in the queue. Important Safety Warning
While V4905 resets the software counter, the physical ink pads are still full of liquid ink. Eventually, you should physically clean or replace the felt pads inside the printer to prevent ink from leaking onto your desk.
Looking to verify your specific printer model compatibility or need the direct link to the V4905 files?
Canon Service Tool V4905 2021: A Verified Download Guide
The Canon Service Tool V4905 is a specialized software utility designed for Canon printers, allowing technicians to diagnose, repair, and maintain these devices. As of 2021, the tool has been updated to enhance its functionality and compatibility with various Canon printer models. This write-up provides an overview of the Canon Service Tool V4905, its key features, and a verified download guide.
What is Canon Service Tool V4905?
The Canon Service Tool V4905 is a comprehensive software solution developed by Canon Inc. to facilitate the maintenance and repair of their printers. The tool enables technicians to perform a range of tasks, including:
Key Features of Canon Service Tool V4905
The Canon Service Tool V4905 offers several key features that make it an essential utility for Canon printer technicians:
Verified Download Guide
To download the Canon Service Tool V4905 2021, follow these steps:
Important Notes
By following this guide, you can obtain a verified download of the Canon Service Tool V4905 2021 and utilize its advanced features to diagnose, repair, and maintain Canon printers.
If you're looking for a legitimate way to obtain or update your Canon Service Tool, here are some general steps and considerations:
If you're a professional or a business owner looking to service Canon products, it might also be beneficial to look into Canon's service provider programs or directly contact Canon's business support for more tailored assistance.
Canon Service Tool V4905 2021 Download Verified: A Comprehensive Review
Are you a Canon printer user or technician looking for a reliable and efficient tool to diagnose and repair printer issues? Look no further than the Canon Service Tool V4905 2021. In this article, we'll take a closer look at this software, its features, and the verified download process.
What is Canon Service Tool V4905?
The Canon Service Tool V4905 is a specialized software designed for Canon printer technicians and advanced users. This tool allows users to diagnose and repair a wide range of printer issues, including printhead problems, paper jams, and firmware errors. The software provides a comprehensive set of features to help technicians troubleshoot and repair Canon printers quickly and efficiently.
Key Features of Canon Service Tool V4905
Verified Download Process
To ensure that you download a verified and safe copy of the Canon Service Tool V4905 2021, follow these steps:
Alternative Download Sources
If you're unable to find the software on the official Canon website, you can try alternative sources. However, be cautious when downloading from third-party websites, as they may bundle the software with malware or viruses.
2021 Update and Compatibility
The Canon Service Tool V4905 2021 is compatible with various Windows operating systems, including Windows 10, 8.1, 8, and 7. The software is regularly updated to ensure compatibility with new Canon printer models and to address any security vulnerabilities.
Conclusion
The Canon Service Tool V4905 2021 is a powerful and reliable software for diagnosing and repairing Canon printer issues. By following the verified download process, you can ensure that you obtain a safe and functional copy of the software. Whether you're a technician or an advanced user, this tool can help you troubleshoot and repair Canon printers efficiently.
Disclaimer: This article is for informational purposes only. We do not condone or promote piracy or unauthorized software downloads. Always obtain software from official sources or reputable websites.
The Canon Service Tool v4905 is a specialized utility designed for Canon printer maintenance, primarily used to resolve critical error codes like 5B00 or 1700, which indicate that the waste ink absorber is full. While not a standard consumer download on official Canon Support pages, it is widely utilized by technicians to extend the life of PIXMA and G-series printers. Key Functions and Uses Canon Service Tool v4905 is a specialized utility
The primary purpose of the v4905 tool is to perform maintenance tasks that are otherwise locked to users.
Waste Ink Counter Reset: Clears "Ink Absorber Full" errors, allowing the printer to resume operation after the physical pads have been cleaned or replaced.
EEPROM Management: Allows technicians to read and write printer identification and usage data.
Print Head Maintenance: Includes deep cleaning cycles and nozzle checks to fix persistent banding or missing colors. Supported Canon Models
The v4905 version is highly compatible with older and mid-range Canon inkjet series: Canon Printers Error Codes: Causes and Solutions
Canon Service Tool V4905 is a specialized utility used for resetting Canon inkjet printers (specifically the IX, MX, MG, and MP series). It is not consumer-friendly software; it is an engineering tool designed for technicians.
If you are searching for this, you likely have a printer displaying the "Support Code 5B00" (Waste Ink Absorber Full) error. For that specific purpose, the tool is highly effective, but it comes with significant caveats regarding safety and usability.
Warning: Use this tool at your own risk. One wrong click can permanently damage your printer.
Rating: 7/10 (for functionality) | 3/10 (for safety/ease of access)
Canon Service Tool V4905 works exactly as intended—it fixes a fatal error that Canon wants you to pay a service center to fix. However, the "Verified 2021" label often masks the reality that these files are modified, pirated, and potentially dangerous.
Recommendation: If your printer is expensive (e.g., a professional PIXMA Pro series), it is safer to take it to a service center. If your printer is a consumer-grade MG or MX model that you would otherwise throw away, this tool is worth the risk to extend its life. Just be sure to physically check your waste ink pads.
Canon Service Tool V4905 2021 Download Verified: A Comprehensive Guide
Are you a Canon printer user facing issues with your device? Do you need to reset your printer or perform advanced maintenance tasks? Look no further! In this blog post, we will discuss the Canon Service Tool V4905 2021 download and provide a verified link for you to access this essential tool.
What is Canon Service Tool V4905?
The Canon Service Tool V4905 is a software utility developed by Canon Inc. to help technicians and users troubleshoot and repair Canon printers. This tool provides advanced features to diagnose and fix common issues, such as printer errors, firmware problems, and more.
Features of Canon Service Tool V4905
The Canon Service Tool V4905 offers a range of features, including:
Why Do You Need Canon Service Tool V4905?
If you're experiencing issues with your Canon printer, the Service Tool V4905 can help you:
Verified Download Link for Canon Service Tool V4905 2021
After verifying the authenticity of the software, we provide a safe and secure download link for the Canon Service Tool V4905 2021:
Download Link: [Insert verified download link]
How to Download and Install Canon Service Tool V4905
To download and install the Canon Service Tool V4905, follow these steps:
Important Notes
Conclusion
The Canon Service Tool V4905 2021 is an essential utility for Canon printer users and technicians. With its advanced features and verified download link, you can now troubleshoot and repair your Canon printer with ease. Remember to use the tool responsibly and always follow proper safety precautions.
Disclaimer: This blog post is for informational purposes only. We do not claim ownership or affiliation with Canon Inc. or any related trademarks. The software and download link are provided for educational and legitimate use only.
Canon printers are reliable. But they sometimes lock up with waste ink errors. The Canon Service Tool V4905 is the official software to fix this. What is Canon Service Tool V4905?
Canon Service Tool V4905 is a specialized software. Canon technicians use it to service PIXMA printers. It interacts directly with the printer's firmware.
The software allows users to perform advanced maintenance. The most common use is resetting the waste ink pad counter. When this counter fills up, the printer stops working. Key Features of V4905
The V4905 version includes several essential service functions: Waste Ink Counter Reset: Clears the absorber full error. EEPROM Operations: Reads and writes printer memory data. Print Head Test: Performs deep cleaning cycles. Model Setting: Configures specific region and model data. Error History: Displays past hardware error codes. Supported Canon Printer Models
This specific version supports a wide range of PIXMA models. It is highly effective for G-Series and MG-Series printers. G Series (Inktank) Canon G1000, G2000, G3000 Canon G1010, G2010, G3010 Canon G4000, G4010 Canon MG2570S, MG2580 Canon MG3500, MG3600 Canon MG5500, MG5600 How to Put Your Canon Printer into Service Mode
You cannot use the tool in normal printing mode. You must manually trigger Service Mode first. Turn off the printer. Keep the power cable connected. Hold down the Stop/Reset button. Press and hold the Power button. Release the Stop/Reset button (keep Power held).
Press the Stop/Reset button 5 times (6 times for some G-series). Release the Power button. The green light will blink and then stay lit. How to Use Service Tool V4905 Once the printer is in Service Mode, follow these steps: Extract the downloaded V4905 file.
Right-click ServiceTool.exe and select Run as Administrator.
Connect the printer via a USB cable only. Wi-Fi will not work. Look for the Clear Ink Counter section. Set the Main counter to 0. Click the Set button. Wait for a confirmation pop-up. Turn the printer off and back on. Common Error Codes in Service Tool If the software fails, it returns an error code: Error 002: The function is not supported by your model. Error 005: The printer is not in Service Mode. Error 006: The printer is not connected or turned off. Error 009: A hardware failure is blocking the reset. Important Safety Warning
Using this tool incorrectly can brick your printer. Never click buttons if you do not know their function.
Resetting the waste ink counter does not physically clean the pads. If you reset the counter multiple times without replacing the physical ink absorbers, ink may eventually leak out of the bottom of the printer and damage your desk or floor.
To help you get your printer back up and running, please let me know: What specific printer model are you trying to fix?
What exact error code or message is flashing on your printer?
Are you stuck on the Service Mode sequence or the software itself?
I can provide the exact step-by-step button sequence for your specific machine.
The Canon Service Tool V4905 is a specialized utility designed to manage internal printer functions, primarily used to reset the waste ink absorber counter (commonly indicated by error codes like 5B00 or E27) when the printer reaches its physical limit. Technical Overview
Primary Function: Clears the "Ink Absorber Full" status, allowing the printer to resume operation after a hardware lockout.
Compatibility: Broadly supports Canon Pixma G-series (e.g., G1000, G2000, G3000), E-series, and certain MG and IP models.
Requirements: The tool only functions if the printer is successfully placed into Service Mode. Operating Procedure
To use the V4905 utility, the printer must first be in its hidden maintenance state:
Enter Service Mode: Typically involves turning the printer off, then holding the Stop/Reset button while pressing Power. While still holding Power, the Stop button is pressed 5 or 6 times (depending on the model) before releasing both. Which of those would you like
Activation: Many versions of V4905 require a unique Hardware ID registration to unlock full functionality, often requiring a key from third-party sellers.
Resetting: Once connected via USB, users navigate to the "Main" tab and click Set under the "Ink Absorber Counter" section. Critical Safety & Risks
Security Hazards: Verified downloads are difficult to find through official channels. Users have reported that many online versions of "V4905" are bundled with malware or Trojans. Always scan downloads with software like Urban VPN or similar security suites.
Hardware Damage: If the printer’s Service Mode is already locked (e.g., due to previous failed reset attempts), no software can reset it; the physical EEPROM chips may need to be replaced.
Physical Overflow: Resetting the counter does not physically clean the ink. Failing to replace the actual felt pads can lead to ink leaking from the bottom of the printer. Reset Canon Service Tool v4905 work 100%
The search for a "verified 2021 download" of the Canon Service Tool v4905 typically leads to technical forums and utility software sites rather than academic or literary essays. In the context of printer maintenance, this tool is a proprietary utility used by technicians to reset the "Waste Ink Absorber" counter and perform deep-level service functions on Canon Pixma and Maxify printers.
If you are looking for an essay-style overview of why this software exists and the controversy surrounding it, The "Right to Repair" Conflict
The Canon Service Tool v4905 represents a focal point in the "Right to Repair" movement. Modern printers are designed with internal pads to soak up excess ink from cleaning cycles. When these pads are theoretically full, the printer locks itself with an error code (like 5B00 or P07) to prevent ink leakage.
The Barrier: Canon does not officially release the Service Tool to the public, requiring users to pay for professional servicing that often costs more than a new printer.
The Underground Solution: Users seek versions like v4905 to bypass these locks, turning a "bricked" device back into a functional tool. Technical Functionality
The v4905 version is a specific iteration known for supporting a wider range of G-series (MegaTank) and MG-series printers.
Service Mode: To use the tool, the printer must be manually put into "Service Mode" (usually via a specific sequence of the Power and Stop buttons).
Main Functions: Beyond resetting waste ink counters, it allows technicians to initialize the print head, clean the nozzles more aggressively than the standard driver, and change the regional firmware settings. The Risks of "Verified" Downloads
The quest for a "verified" download is fraught with digital security risks. Because the software is proprietary and distributed through unofficial channels:
Malware: Many sites claiming to host v4905 bundle it with "download managers" or trojans.
EEPROM Damage: Using the wrong version of the Service Tool or clicking the wrong button while in Service Mode can permanently corrupt the printer's EEPROM (internal memory), effectively killing the logic board.
Counterfeit Software: Some versions sold on auction sites are simply older versions (like v3400) rebranded to look like newer updates. Conclusion
While the Canon Service Tool v4905 is a vital lifeline for extending the life of hardware, it exists in a legal and technical gray area. It highlights the tension between manufacturer-controlled ecosystems and the consumer's desire to maintain the products they own.
In the world of printer maintenance, Canon Service Tool v4905 has gained a reputation as a legendary "skeleton key" for tech-savvy owners dealing with stubborn "Ink Absorber Full" errors. The Problem: The Flashing Error
The story usually begins with a blinking orange light and a dreaded "Error 5B00" or "1700" appearing on a user's PC. For most, this signal means the printer has decided its internal waste pads are full, effectively turning a perfectly functional machine into a plastic brick. Standard resets rarely work, and official repairs often cost more than a new printer. The Search: Finding v4905
This leads users into the deep corners of tech forums in search of the 2021 verified download of version 4905. Unlike earlier versions that lacked support for newer G-series or Pixma models, v4905 became the gold standard because it offered:
Wider Compatibility: Support for more recent models released leading up to 2021.
EEPROM Access: The ability to read and write printer data to clear internal counters.
The "Main" Reset: A specific function to set the waste ink counter back to zero. The Risk: A Technical Gamble
The climax of this story involves the "Service Mode" ritual—a precise sequence of holding the Resume and Power buttons that feels like entering a cheat code on an old console. If done correctly, the Service Tool recognizes the printer, a few clicks later the counter is reset, and the printer "lives" again.
However, the "verified" part of the search is where many stories take a dark turn. Because this is a technician-only utility, the internet is filled with "v4905" downloads that are actually malware. Successful users are those who find the genuine file, often shared by community heroes on specialized repair blogs, allowing them to bypass planned obsolescence and keep their hardware out of a landfill.
Canon Service Tool V4905 2021 Download Verified: A Comprehensive Guide
Introduction
Canon Service Tool V4905 is a specialized software used for servicing and resetting Canon printers. The tool is designed to help technicians and users troubleshoot and repair common issues with Canon printers, such as error codes, print head problems, and firmware updates. In this article, we will provide a detailed guide on how to download and use Canon Service Tool V4905 2021, verified and updated for the latest version.
What is Canon Service Tool V4905?
Canon Service Tool V4905 is a software application developed by Canon Inc. to provide advanced diagnostic and repair capabilities for Canon printers. The tool allows users to perform various tasks, including:
Features of Canon Service Tool V4905
The latest version of Canon Service Tool V4905 (2021) comes with several features and improvements, including:
Downloading Canon Service Tool V4905 2021
To download Canon Service Tool V4905 2021, follow these steps:
Verified Download Links
Alternatively, you can use the following verified download links:
Installation and Usage
To install and use Canon Service Tool V4905 2021, follow these steps:
Conclusion
Canon Service Tool V4905 2021 is a powerful software application for servicing and repairing Canon printers. With its advanced diagnostic and repair capabilities, users can troubleshoot and resolve common printer issues. By following the steps outlined in this article, you can download and use Canon Service Tool V4905 2021, verified and updated for the latest version.
Canon Service Tool v4905 is a specialized software used primarily for resetting the waste ink absorber counter on various Canon Pixma printer models when they encounter errors like the "Ink Absorber Full" message. ⚠️ Security Warning
There is no official public download for this tool from Canon. Most versions found online are leaked or sold by third parties. Форум по СНПЧ Malware Risk:
Many "verified" downloads for v4905 from forums or third-party blogs have been reported to contain Trojan Horse viruses Verification:
If you choose to download, always verify the file with a security scanner like Malwarebytes VirusTotal before opening. How to Use Canon Service Tool v4905 To use the tool, your printer must first be in Service Mode 💯 CANON IP SERIES PRINTER RESETTER SERVICE TOOL V4905
Q: Is Canon Service Tool V4905 free? A: Yes, the tool itself is free if you find a legitimate leak. Never pay for a download link. Scammers sell this tool for $20-$50, but it is freely available in repair circles.
Q: Will V4905 work on my new Canon G-series (MegaTank)? A: Mostly no. The G-series (G1020, G2020, G3020) uses a different waste ink system and a newer tool (V5100 or V5300). V4905 is best for older cartridge-based PIXMA models (MG2400, MG2500, MG3500, TS3100, TS3300, etc.).
Q: Can I use V4905 on macOS or Linux? A: No. This is a Windows 32-bit application. You must run it via Wine on Linux or Boot Camp/Parallels on Mac. However, USB passthrough is notoriously shaky. A Windows laptop is strongly recommended.
Q: My antivirus flagged the verified download. What do I do? A: Some antivirus programs flag any "hacking tool" (which resets counters) as a Potentially Unwanted Program (PUP). If you verified the SHA hash on VirusTotal, add an exception to Windows Defender. Do NOT disable antivirus for unknown files.
Q: What if the tool says "Error 006" or "Timeout"? A: This means the printer is not communicating. Solutions: