DANGER – indicating a more severe hazard level.
The Asmaco Spray Paint MSDS is a practical tool, not just a compliance document. It tells you:
Whether you’re a maintenance manager in a factory, a car body shop owner, or a hobbyist painting a bicycle, reading the MSDS before you press that nozzle is a small step that prevents big disasters.
Remember: A spray can is a controlled explosion. The MSDS is your instruction manual.
Disclaimer: This article is for informational purposes only. Always consult the official Asmaco MSDS for the specific product and batch you are using. Safety regulations and product formulations change. Asmaco Spray Paint Msds
An MSDS (now often called SDS – Safety Data Sheet) is a 16-section document that provides detailed information on:
For Asmaco Spray Paint, the MSDS is vital because the product presents three major risks:
Without reading the Asmaco Spray Paint MSDS, workers may misuse the product in confined spaces, near ignition sources, or without adequate respiratory protection—leading to fires, chemical pneumonitis, or long-term neurological effects.
| Regulation | Classification | |-------------|----------------| | UN Number | UN1950 | | Proper shipping name | Aerosols, flammable | | Hazard class | 2.1 (Flammable gas) | | Packing group | None | | Marine pollutant | Possibly if >5L – check MSDS | DANGER – indicating a more severe hazard level
Transport restrictions:
| Chemical name | CAS No. | Concentration (%) | |-----------------------------|--------------|-------------------| | Acetone | 67-64-1 | 20–30 | | Toluene / Xylene mixture | 108-88-3 / 1330-20-7 | 15–25 | | Propane/Butane (propellant) | 74-98-6 / 106-97-8 | 30–40 | | Pigments & resin solids | Proprietary | 10–20 |
Exact composition may vary by color.
| Property | Value (typical) | |-----------|-----------------| | Appearance | Colored liquid + propellant gas | | Odor | Sweet, solvent‑like (acetone / toluene) | | pH | Not applicable (non‑aqueous) | | Flash point | Below 0°C (closed cup) – extremely flammable | | Boiling point | -42°C to 120°C (propellant to solvent range) | | Vapor density | Heavier than air – vapors sink to floor | | Auto‑ignition temperature | ~480°C (toluene) | | VOC content | Typically 600–800 g/L – high | Whether you’re a maintenance manager in a factory,
These properties explain why the product behaves as it does.
| Property | Typical Value | |-----------|----------------| | Appearance | Colored, homogeneous liquid in aerosol can | | Odor | Sweet, solvent (aromatic hydrocarbons) | | pH | Not applicable (organic solvent) | | Boiling point (solvent) | 56°C (Acetone) to 140°C (Xylene) | | Flash point (aerosol) | < -15°C (extremely flammable) | | Auto-ignition temperature | > 200°C | | Vapor pressure | High (due to propellant) | | Relative density (liquid) | 0.8 – 0.9 g/cm³ (lighter than water) | | Solubility in water | Negligible | | VOC content | 400 – 650 g/L (typical solvent-based spray paint) |
All workers using Asmaco spray paint should complete annual “Aerosol Safety and SDS Comprehension” training.