After initializing counters, close the program. Power cycle the printer (turn off, unplug for 30 seconds, plug back in, turn on). The error light should now be gone.
| Issue | Solution | |-------|----------| | Program does not detect printer | Use USB only. Disable firewall. Run as Admin. | | Error 20000010 | Communication timeout. Try a different USB port or cable. | | "Model mismatch" | You downloaded a version for L3100 or L3065. Get the exact L3060 version. | | Program crashes on Windows 10/11 | Set compatibility to Windows 7 + Disable fullscreen optimizations. | | Counter resets but error returns | You must physically replace the waste pad. |
The Epson L3060 Adjustment Program is a powerful lifesaver for out-of-warranty printers. But treat it like a “check engine light reset” – fixing the symptom without addressing the real problem can lead to a bigger mess (literally, ink everywhere).
Have you used the adjustment program before? Or are you stuck on a “Service required” error right now? Let me know in the comments – I’m happy to help further.
Disclaimer: This post is for educational purposes only. Resetting the waste ink counter may violate your printer’s warranty or Epson’s terms of service. You assume full responsibility for any damage.
The Epson L3060 Adjustment Program (also known as a ) is a specialized utility used to fix service errors like "The printer's ink pads are at the end of their service life". This tool allows you to reset the Waste Ink Pad Counter so you can continue printing without a hardware repair. How to Use the Epson L3060 Resetter
To resolve the ink pad error, follow these standard steps found in the adjustment utility: Preparation : Download and extract the program files (usually AdjProg.exe ). Connect your printer via USB cable. Select Model : Open the program, click , and choose from the Model Name list. Adjustment Mode : Click on Particular Adjustment Mode Waste Ink Pad Counter : From the menu, select Waste ink pad counter and click OK. Check and Initialize Check the box for Main Pad Counter (and Platen Pad Counter if available). to see the current usage percentage. Initialize to reset the counter to 0%.
: Turn the printer off when prompted, then click OK and turn it back on to clear the error. Critical Maintenance Warning While the software clears the digital error, it does physically clean the ink pads.
The Epson L3060 Adjustment Program (often called a "resetter") is a specialized utility used by technicians and owners to perform maintenance tasks that standard printer drivers cannot handle. Its most critical function is resetting the Waste Ink Pad Counter, which prevents the printer from locking up when its internal sponges are theoretically full. Core Functions of the Adjustment Program
While the software contains several service-level tools, it is primarily used for two tasks:
Waste Ink Pad Reset: When the printer displays errors like "Service Required" or "A printer's ink pad is at the end of its service life," this program resets the internal counter to 0% to allow further printing. adjustment program epson l3060
Maintenance Adjustments: It allows for "Particular Adjustment Mode," which includes head cleaning, EEPROM data reading/writing, and print head alignment adjustments. Standard Reset Procedure
For the Epson L3060, the process typically follows these steps:
Preparation: Ensure the printer is connected via USB (Wi-Fi resets are often unstable) and powered on.
Selection: Open the program, click "Select," and choose the L3060 model and the specific USB port.
Maintenance Tab: Click on "Particular Adjustment Mode" and navigate to the "Waste ink pad counter" option.
Initialization: Check the boxes for the counters (Main pad, etc.), click "Check" to see current levels, then click "Initialize" to clear them.
Restart: Once the program confirms the reset, turn the printer off and then back on to finalize the process. Critical Considerations
Physical Hardware: Resetting the software counter does not physically clean the ink pads. If the pads are saturated, they may eventually overflow and leak ink onto your desk or internal electronics. It is highly recommended to physically clean or replace the waste ink sponges when performing a software reset.
Risks: Using "free" versions of these programs from untrusted sources can lead to malware infections. Authenticated tools or "Reset Keys" are often safer alternatives for users.
Official Support: For permanent fixes or if the printer is still under warranty, users can seek assistance through the Official Epson Support Portal. After initializing counters, close the program
The Epson L3060 Adjustment Program is a specialized software utility used to reset the "waste ink pad counter" (often referred to as the "pampers" or "service required" error) in Epson EcoTank printers. When the ink pad, which collects waste ink during printing and cleaning, reaches its capacity limit, the printer stops working and displays a flashing light error. This program allows users to reset the counter to zero without replacing the physical pads. Key Information Regarding the Program
Purpose: Resets the Main pad counter and Platen pad counter for the Epson L3060.
Compatibility: Designed for Windows operating systems (Windows XP through Windows 10/11).
Version: Commonly, Ver. 1.0.3 build 6528 or similar Euro versions are used.
Limitations: The program usually works on only one computer (linked to an ID) and requires the printer to be connected via a USB cable. Steps to Use the Epson L3060 Adjustment Program
Preparation: Turn off the antivirus software, as it may flag the program as a threat. Connect the printer to the PC using a USB cable.
Launch: Extract the downloaded archive and run the executable file (e.g., AdjProg.exe or AdjProg_Rev3.exe) as an administrator.
Model Selection: Click Select and ensure the model is set to L3060. Choose the USB port corresponding to your printer. Access Utility: Click on Particular adjustment mode. Reset Counter: Select Waste ink pad counter, then click OK.
Initialization: Check the boxes for Main Pad Counter and Platen pad counter. Click Check to view the usage, then click Initialization to reset the counters.
Finalization: The software will request that you turn off the printer. Turn it off, then on again, and the error should be cleared. Critical Considerations Disclaimer: This post is for educational purposes only
Physical Pad Replacement: Resetting the counter only fixes the software error. The physical ink pads inside the printer will still be saturated. It is highly recommended to clean or replace them to avoid ink leaking onto your desk.
Risks: Performing these actions is done at your own risk. Incorrect use of the program can potentially damage the printer's EEPROM.
Alternatives: If you do not want to use a third-party adjustment program, the alternative is to take the printer to an authorized service center for a paid, professional reset and pad replacement.
To make this information more useful for you, could you let me know:
Are you seeing a specific error message (e.g., "service required" or flashing lights)? Do you have a Windows PC available for the reset?
⚠️ Warning: Only proceed if you’re comfortable with technical tools. Wrong usage can brick your printer.
Click "Particular adjustment mode" or "Initial setup" depending on the interface version. A port selection menu appears. Select the USB port where the L3060 is connected. Click OK.
| Error Message | Cause | Solution | |----------------|--------|----------| | “Communication error” | USB cable loose or wrong driver | Use Epson L3060 driver from official site first. Try different USB port. | | “Model not supported” | Wrong program version | Find a newer adjustment program (v2.2.0+). | | “Counter reset failed” | EEPROM write protection | Run the program as Admin. Some firmwares block reset; you may need a firmware downgrade first. | | Printer still shows error after reset | Physical pad full or sensor issue | Open printer, clean or replace waste pads. Check the pad sensor lever. |
Official adjustment programs are Windows-only. On Mac/Linux, you can run them using a virtual machine (VirtualBox + Windows).