Actia Psa Xs Evolution 9780.z5 Driver May 2026

Summary The Actia PSA XS Evolution 9780.z5 driver is a dedicated diagnostic interface tailored for PSA Group vehicles (Peugeot, Citroën, DS). Designed to bridge vehicle electronics and diagnostic software on a PC, this driver enables communication with vehicle ECUs, fault code reading/clearing, parameter monitoring, and module programming when paired with compatible diagnostic suites. The 9780.z5 designation refers to a firmware/driver package optimized for the XS Evolution hardware interface series.

Build and Packaging

Installation Experience

Connectivity & Stability

Functionality & Features

Performance in Real-World Use

Pros

Cons

Troubleshooting Tips

Who Should Use It

Verdict The Actia PSA XS Evolution 9780.z5 driver is a competent and dependable communication driver for the XS Evolution hardware, enabling professional-level diagnostics on PSA vehicles. While installation and driver-signing hurdles can frustrate less technical users, once properly set up it delivers stable connectivity, low latency, and the protocol breadth required for everything from basic troubleshooting to advanced calibration tasks — assuming the diagnostic host software provides those higher-level functions.

If you want, I can draft a shorter review version, a troubleshooting guide for common install issues, or a step-by-step install and configuration checklist tailored to your Windows version.

The Actia PSA XS Evolution (9780.Z5) is a professional-grade Vehicle Communication Interface (VCI) used for deep-level diagnostics on Peugeot and Citroën vehicles. Whether you are using a genuine French-made unit or a clone, proper driver installation is the most critical step for stable communication with Diagbox, Lexia 3, or PP2000 software. 1. Official Driver Sources

For the most stable performance on modern operating systems like Windows 10 and 11, it is recommended to use the latest drivers from the manufacturer's official support channels:

ACTIA IME Support: The official download portal offers the Basic+ XS / CAT Level X driver (Version 2.9.0.8) which is compatible with Windows 8, 10, and 11 (both 32-bit and 64-bit architectures).

Lite XS Drivers: If you have the "Lite" version of the interface, you can download the Lite XS Level X driver (Version 2.9.0.0). 2. Installation Guide

To ensure your computer recognizes the 9780.Z5 interface, follow these steps:

Download and Extract: Obtain the software from the ACTIA IME Download Center and unzip the setup files. Actia Psa Xs Evolution 9780.z5 Driver

Run Setup: Execute the setup.exe file as an Administrator. Follow the on-screen prompts and restart your computer if prompted.

Connect Hardware: Plug your Actia VCI into a USB port. Your computer should now recognize it as a "PSA XS Evolution" device.

Verify Connection: Open the PSA Interface Checker tool. Click "Activate" and wait for an "INIT OK" message to confirm the drivers are correctly communicating with the hardware. 3. Compatibility & Operating Systems

Windows XP / 7 (32-bit): Historically the most stable for older versions of Lexia and PP2000 (up to Diagbox v7.xx).

Windows 10 / 11 (64-bit): Best suited for newer Diagbox versions (v9.xx and above). These newer software packages often include built-in drivers or require the ACTIAPnPInstaller. 4. Troubleshooting Common Issues

"VCI Not Connected" Error: If Diagbox fails to find the device, try unplugging the USB cable, waiting a few seconds, and plugging it back in after the software has fully launched.

Firmware Mismatch: Using an older firmware (e.g., version 4.2.0) on a newer software version can cause communication failures. Use the PSA Interface Checker to reflash your device to a compatible firmware version like 4.3.3 or 4.3.7.

Driver Types: If standard drivers fail on Windows XP, check the Device Manager. Some users find success switching from the "UMDF" driver to the "Multi-instance" driver variant. 5. Identifying Genuine vs. Clone Hardware

It is important to know which hardware you possess, as clones may require specific "patched" drivers or older firmware versions:

Genuine Units: Feature a silver nameplate on the back with unique serial numbers (e.g., 921815C or 922173A). The 15-pin USB connector is typically black.

Clones: Often marked "Made in France" on a silver sticker and use generic serial numbers such as 921815B or 921815C / 40W07 / 0005451. These are frequently blacklisted by official Diagbox updates above version 5.29. Actia Psa Xs Evolution Download Windows - Facebook

The Actia PSA XS Evolution 9780.Z5 is a dealer-level vehicle communication interface (VCI) used for comprehensive diagnostics of Peugeot and Citroën vehicles. It is the hardware component required to run software like DiagBox, Lexia 3, and Peugeot Planet 2000 (PP2000). Driver & Software Overview

Driver Purpose: Converts signals from the vehicle’s electronic control units (ECUs) into a format readable by your computer via USB.

Official Source: ACTIA IME provides official downloads for various XS Family drivers (e.g., PASSTHRU+ XS 2G, Basic+ XS), often requiring a serial number for specific versions.

DiagBox Integration: Most modern DiagBox installations (v7.xx and higher) include the necessary drivers. The software typically updates the interface firmware (e.g., to version 4.3.2) automatically upon its first launch. Compatibility & Technical Requirements Lexia 3 и его клон PSA XS Evolution - Drive2

The Actia PSA XS Evolution (9780.Z5) driver facilitates communication between a computer and a vehicle via the Lexia 3, PP2000, or Diagbox diagnostic interfaces. It is primarily used for deep-level diagnostics on Peugeot, Citroën, DS, and newer Opel vehicles. Core Functionality

Comprehensive Diagnostics: Performs nearly all functions of an authorized dealer tool, including system-wide "Global Tests" to detect all installed ECUs. Summary The Actia PSA XS Evolution 9780

Module Telecoding & Programming: Allows for advanced modifications like ECU programming, key programming, and manual telecoding of modules (specific software versions required).

Live Data Monitoring: Displays real-time parameters such as engine speed, battery voltage, and oxygen sensor readings, with support for graphical displays and data logging.

Actuator Testing: Enables manual activation of vehicle components, such as turning on fuel pumps or locking/unlocking doors, to verify hardware functionality.

Fault Management: Reads and clears both stored and pending diagnostic trouble codes (DTCs) with detailed descriptions. Technical Compatibility

The Actia PSA XS Evolution 9780.Z5 is a professional-grade diagnostic interface specifically designed for Citroën and Peugeot vehicles. It acts as a bridge between a vehicle's electronic control units (ECUs) and a computer running diagnostic software like DiagBox, Lexia 3, or PP2000. Core Capabilities and Features

The 9780.Z5 interface is highly regarded for its deep integration with PSA vehicle systems, offering capabilities that go far beyond standard OBD2 scanners:

Comprehensive Diagnostics: It can perform "Global Tests," read and clear fault codes, and display real-time live data from multiple ECUs.

Advanced Programming: The tool supports advanced functions such as telecoding (reconfiguring vehicle settings), programming replacement keys, and resetting service intervals.

Protocols Supported: It includes a K-Line multiplexer and CAN-BUS interface, supporting standard protocols like SAE J1850 (PWM and VPW) for wide compatibility with older and newer models. Driver Installation and Management

To ensure the hardware is recognized by Windows, the correct drivers must be installed. This is often the most challenging part of the setup: Actia Psa Xs Evolution Download Windows - Facebook

In the world of automotive diagnostics, particularly for French automotive groups Peugeot, Citroën, and DS (PSA), few names carry as much weight as Actia. The Actia PSA XS Evolution is a gold-standard diagnostic interface used by professional mechanics and serious DIY enthusiasts. However, a piece of hardware is only as good as its software bridge—the driver. Specifically, the Actia PSA XS Evolution 9780.z5 Driver is the critical component that allows your Windows-based diagnostic laptop to communicate flawlessly with the vehicle’s electronic control units (ECUs).

If you have searched for this exact phrase, you know the struggle: outdated links, unsigned drivers, and mysterious COM port errors. This article is your definitive resource. We will cover everything from the technical anatomy of the 9780.z5 chipset to step-by-step installation, common error codes, and advanced optimization.

Before downloading anything, look at the bottom of your device.

Yes. Once the Actia PSA XS Evolution 9780.Z5 driver is installed correctly, this is one of the most stable J2534 boxes for PSA group vehicles. It supports CAN, K-Line, and even the older Van bus.

Pro Tip: Once you get it working, never let Windows Update automatically update your drivers. Use the Hide Updates tool to block Actia drivers from Microsoft (they break it).

Disclaimer: This guide is for educational purposes. Ensure you own a legitimate license for DiagBox/Lexia and comply with local laws regarding vehicle diagnostics.

Actia PSA XS Evolution 9780.Z5 Driver: The Ultimate Setup Guide Installation Experience

The Actia PSA XS Evolution (9780.Z5) remains the gold standard for Peugeot and Citroën diagnostics. However, getting the driver to work on modern hardware can be a headache. Whether you are using Diagbox, Lexia 3, or PP2000, this guide will help you get your interface recognized and ready for coding. Why Your PC Isn’t Recognizing the 9780.Z5

The most common issue is driver incompatibility with 64-bit operating systems. Because the original hardware was designed for Windows XP, newer versions of Windows (10 and 11) often block the driver due to "Driver Signature Enforcement." Step-by-Step Installation Guide

Disable Driver Signature EnforcementBefore installing, you must tell Windows to allow unsigned drivers. Go to Settings > Update & Security > Recovery. Under Advanced Startup, click Restart Now.

Select Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 or F7 to "Disable driver signature enforcement."

Install Diagbox Software FirstNever plug in the hardware before the software is installed. The drivers are usually bundled within the Diagbox installation folder. Run the Diagbox setup (v7.xx or v9.xx).

During installation, the "Drivers PSA" setup should trigger automatically.

Manual Driver UpdateIf your device shows as "Unknown Device" in Device Manager: Right-click the device and select Update Driver. Choose "Browse my computer for drivers." Navigate to: C:\AWRoot\bin\fi\DRIVER. Select the "ACTIA USB Devices" folder and click OK. How to Verify the Driver is Working

To ensure your Actia XS Evolution is communicating correctly: Open Device Manager. Look under Universal Serial Bus controllers.

You should see "USB Com Board Driver (Multi-instance)" or "ACTIA USB Devices."

If you see a yellow exclamation mark, the firmware on your interface may need an update using a "PSA Interface Checker." Pro Tips for a Stable Connection

Use Windows 7 32-bit: For the most stable experience, use a virtual machine (VM) running Windows 7 32-bit.

Avoid USB 3.0: This hardware prefers USB 2.0 ports. If you only have USB 3.0, use a powered USB hub.

Firmware Check: Ensure your interface is "Evolution" (Rev C) to work with the latest versions of Diagbox. If you're still seeing "Communication Error," tell me: What version of Windows are you using? What is your Diagbox version? Does the device show up in Device Manager at all?

REPORT: ACTIA PSA XS EVOLUTION (REF: 9780.Z5) DIAGNOSTIC INTERFACE

Date: October 26, 2023 Subject: Technical Overview and Driver Status of the XS Evolution Interface

The driver package for this specific interface usually includes several components: