Acer Q65h2-am V1.1 Manual -

Disclaimer: This content is provided for informational purposes. Specifications may vary slightly between hardware revisions. Acer and the Acer logo are registered trademarks of Acer Inc.

The Acer Q65H2-AM V1.1 is a Micro-ATX motherboard commonly found in professional-grade desktop systems like the Acer Veriton S4610G. Based on the Intel Q65 Express chipset, this board is designed for reliability and legacy compatibility, making it a popular choice for budget-friendly workstation builds or repairs.

While a single comprehensive PDF manual is often hard to find for OEM boards, this guide serves as a functional manual, covering essential specifications, pinouts, and hardware configurations. Core Specifications

The Q65H2-AM V1.1 supports 2nd Generation Intel processors and offers a robust set of legacy and modern expansion options:

Processor Support: Intel LGA 1155 socket for 2nd Generation (Sandy Bridge) Core i7, i5, i3, Pentium, and Celeron processors (Max 95W TDP).

Memory: 4 x 240-pin DDR3 DIMM slots, supporting Dual-Channel DDR3 1333 MHz (Non-ECC, unbuffered) with a maximum capacity of 16GB. Chipset: Intel Q65 Express. Expansion Slots: 1 x PCI Express x16 (2.0) 2 x PCI Express x1 1 x 32-bit PCI slot Storage: 1 x SATA III (6.0 Gb/s) — typically the red connector. 4 x SATA II (3.0 Gb/s) — typically black connectors. Front Panel Connector Pinout

Connecting the front panel (power button, reset, LEDs) is one of the most critical steps during assembly. The Q65H2-AM V1.1 typically uses a 14-pin or standard 10-pin header layout. Pin Numbers 1 & 3 HDD LED Positive (+) on Pin 1 2 & 4 Power LED Positive (+) on Pin 2 5 & 7 Reset Switch No specific polarity 6 & 8 Power Switch No specific polarity 12 & 14 LAN LED Side-ways orientation Rear I/O and Internal Headers

The board provides extensive connectivity for peripherals and internal hardware: Video Outputs: VGA, DVI-D, and DisplayPort.

USB Support: Up to 14 USB 2.0 ports (6 on the rear panel, plus internal headers for 8 more).

Legacy Ports: Includes PS/2 for keyboard and mouse, one Serial port, and a Parallel port.

Audio/Network: Realtek High Definition Audio and Intel Gigabit Ethernet.

Power Connectors: Standard 24-pin ATX and 4-pin ATX 12V P4 connector. Installation and Troubleshooting Tips acer q65h2-am v1.1 manual

The Acer Q65H2-AM V1.1 is an OEM motherboard produced by ECS (Elitegroup Computer Systems) for Acer, primarily used in the Veriton X4610, X4610G, and X4618G desktop series. Because it is an OEM part, a standalone retail manual is often unavailable, but the essential technical specifications and pinouts are detailed below. Core Specifications

Socket & CPU: Supports LGA 1155 socket for 2nd Generation Intel Core i3, i5, and i7 (Sandy Bridge) processors with a maximum TDP of 95W. Chipset: Intel Q65 Express.

Memory: 4 x 240-pin DDR3 DIMM slots, supporting up to 16GB of 1333 MHz non-ECC, un-buffered memory. Form Factor: Micro-ATX. Expansion Slots: 1 x PCI Express x16 (2.0) 2 x PCI Express x1 Front Panel Header Pinout

If you are moving this board to a new case, use the following 9-pin standard layout often found on these boards: Pin Number Assignment 1 & 3 HDD LED (Positive on 1, Negative on 3) 2 & 4 Power LED (Positive on 2, Negative on 4) 5 & 7 Reset Switch (No polarity) 6 & 8 Power Switch (No polarity) 9 Not Used (often blank) 10 Missing (Key pin) Connectivity & Ports

Storage: 5 x SATA II 3.0Gb/s connectors (some variants may include a single SATA III port).

Rear I/O: VGA, DVI-D, and HDMI video outputs; 6 x USB 2.0 ports; 1 x Serial (COM) port; RJ-45 Gigabit Ethernet; and PS/2 Keyboard/Mouse ports.

Internal Headers: 3 x USB 2.0 headers, 4-pin CPU Fan, and 3-pin System Fan. Documentation & Support

Official Downloads: You can search for generic system manuals or BIOS updates by entering your SNID on the Acer Support website. BIOS: Uses AMI UEFI BIOS. Front panel pin installation, help! - Acer Community

The Acer Q65H2-AM v1.1 officially supports 2nd gen Intel Core (Sandy Bridge). Unofficially, with BIOS v1.1 or higher, it supports 3rd gen (Ivy Bridge).

| CPU Family | Supported | Example Models | | :--- | :--- | :--- | | Core i7-2xxx (Sandy Bridge) | Yes | i7-2600, i7-2600S | | Core i5-2xxx (Sandy Bridge) | Yes | i5-2500, i5-2400, i5-2300 | | Core i3-2xxx (Sandy Bridge) | Yes | i3-2130, i3-2100 | | Pentium G6xx/G8xx | Yes | G850, G640 | | Core i7-3xxx (Ivy Bridge) | Check BIOS | i7-3770 (Requires BIOS v1.2+) | | Core i5-3xxx (Ivy Bridge) | Check BIOS | i5-3570 (Requires BIOS v1.2+) |

Warning: TDP is limited to 95W. Do not install an i7-2700K (95W is fine, but overclocking is locked by the BIOS). The Acer Q65H2-AM v1

I can:

Date: March 23, 2026.

If you want, I can:

Which format would you like?

The Acer Q65H2-AM V1.1 is a micro-ATX motherboard produced by ECS (Elitegroup Computer Systems) for Acer’s Veriton S4610G and M4610 series desktop computers. It is based on the Intel Q65 Express chipset and supports 2nd generation Intel "Sandy Bridge" processors. Technical Specifications

CPU Support: Intel LGA 1155 socket; supports Sandy Bridge Core i7, i5, and i3 processors (up to 95W TDP).

Memory: 4x 240-pin DDR3 DIMM slots; supports dual-channel DDR3 1333 MHz non-ECC, un-buffered memory; maximum capacity of 16GB. Expansion Slots: 1x PCI Express x16 (2.0) 2x PCI Express x1 1x 32-bit PCI slot

Storage: 5x SATA II (3.0Gb/s) connectors (Note: some revisions may feature 1x SATA III and 4x SATA II). Rear I/O Ports: 1x VGA, 1x DVI-D, and 1x DisplayPort 6x USB 2.0 ports 1x RJ-45 Gigabit LAN port (Intel) PS/2 ports for keyboard and mouse 1x Serial (COM) port Front Panel Connector Pinout

The front panel header is typically located at the bottom-right corner of the board. Pins are numbered with pin 1 indicated by a white square on the PCB. Pin Numbers 1 & 2 HDD LED Indicates hard drive activity (polarized) 2 & 4 Power LED Case power light (polarized) 5 & 7 Reset Switch Connects to the case reset button 6 & 8 Power Switch Connects to the case power button 12 & 14 LAN LED Indicates network activity Installation Notes

Power Supply: Requires a standard 24-pin ATX main power connector and a 4-pin ATX 12V (P4) CPU power connector.

SATA Layout: On some Acer boards, the red connector is designated for high-speed SATA III (DVD/SSD), while black connectors are SATA II. Date: March 23, 2026

Legacy Warnings: Certain revisions of this hardware have been noted for historical recalls or defects; users should ensure proper cooling and inspect for bulging capacitors on older units. Manual & Drivers

Official documentation is no longer actively hosted on Acer's main landing pages due to the product's age, but can still be found through the Acer Support Search by entering the SNID or serial number of the original Veriton chassis.

If you're having trouble booting with a newer CPU or need the latest BIOS, let me know the specific processor model you're trying to use. ECS Q65H2-AM (V1.1) - The Retro Web

Report Title: Technical Overview & Reference Document for Acer Motherboard Model Q65H2-AM v1.1 Report Date: [Insert Current Date] Prepared By: [Your Name/Department] Subject: Compilation of specifications, jumpers, and BIOS recovery based on board revision 1.1.

The Acer Q65H2-AM v1.1 is an Intel Q65 Express chipset motherboard manufactured in the Sandy Bridge era (2011–2012) . Acer produced this board exclusively for pre-built systems like the Veriton M2611, Veriton X6610G, and Veriton L4610G.

Because it was never sold at retail, Acer does not provide a standalone manual download for the "Q65H2-AM." Instead, the documentation is bundled within the "Acer Veriton Series Service Guide." However, those 200+ page service guides are cumbersome. This article extracts the essential data from those service guides and community teardowns.

Alternative Search Tip: If you need a physical PDF, search for "Acer Veriton M2611 Service Guide" rather than the motherboard model number alone. The motherboard section inside that guide covers the Q65H2-AM v1.1.

The most requested section of any Acer Q65H2-AM v1.1 manual is the front panel connector. Acer uses a non-standard layout compared to Intel’s standard. Do not guess—you will short the board.

Location: Bottom right corner. Labeled "F_PANEL" (6x2 pins, but pin 10 is missing).

Here is the exact pinout looking at the board with the PCIe slots pointing down:

| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Button (+) | | 7 | Ground | 8 | Power Button (-) | | 9 | Reserved | 10 | Key (Missing pin) | | 11 | Ground | 12 | Speaker (5V) |

How to wire this: