6765 Scatter File Install

PRELOADER 0x0
PGPT 0x0
PROTECT1 0x1c00
...
SYSTEM 0x5000000

Disconnect the phone. Hold Power + Volume Up (or depending on model) to enter recovery, then select Wipe data/factory reset. Reboot. The first boot may take 5–10 minutes.

Open the file in a text editor. Look for:

############################################################################################################
#  General Setting
############################################################################################################
- general: MTK_PLATFORM_CFG
  info: 
    - mt6765

If you see mt6735, mt6750, or mt6785 do not use it.

Wait for the green checkmark (Download OK). This usually takes 2-5 minutes. 6765 scatter file install

The MT6765 scatter file is a critical text-based map used to flash firmware onto MediaTek (MTK) Android devices like the LG Stylo 6 or various Oppo models. It defines the partition layout—including the preloader, recovery, and system partitions—telling tools like SP Flash Tool exactly where each file should be written in the device's eMMC storage. Essential Prerequisites

Before attempting an install, you must have the following components:

MediaTek USB VCOM Drivers: Essential for your PC to communicate with the phone while it's powered off. PRELOADER 0x0 PGPT 0x0 PROTECT1 0x1c00

SP Flash Tool: The primary software for flashing scatter-based firmware.

Stock Firmware: A package containing the .txt scatter file and associated partition images (e.g., recovery.img, system.img) for your exact phone model. Installation Steps Using SP Flash Tool How To Flash MediaTek Phones Using SP Flash Tool

Once finished, you will see a big Green Circle saying "Download Ok". Disconnect the phone

The scatter file is always bundled inside the stock ROM zip. Never download a standalone "scatter file" from random forums unless you absolutely trust the source. Instead:

Warning: Some custom ROMs or "ported" firmwares may contain a modified scatter file. Always verify the first line: $ddr_map: dram_576M or similar for MT6765.

A "scatter file" is a plain-text configuration used by MediaTek (MTK) firmware flashing tools (like SP Flash Tool) to map firmware image files to partitions on MTK-based devices. The term "6765" likely refers to the MediaTek Helio G85 / MT6765 chipset family or a specific device model using an MT6765-series SoC. Installing a scatter file means loading a firmware package (or its partition map) into a flashing tool so you can flash, backup, or restore firmware partitions.

Scroll to Top